The types and function of foam glass are examined as a function of the employed foaming agents. Mixes with different granulometric composition of the batch were developed and subjected to heat-treatment. The influence of the fractional composition of the foam-glass batch on the density and volume of the foam glass and foam-glass materials was studied.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. S. Kosarev, V. A. Smolii, B. A. Yatsenko, and B. M. Goltsman, “Technological particulars of obtaining cellular glass used as a heat-insulating layer in silicate multi-layer composite heat-insulating and decorative material,” Tekh. Tekhnol. Silikatov, No. 4, 2 – 7 (2016).
V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Influence of ash-slag materials on temperature-time parameters of the synthesis of a heat-insulating silicate material,” Tekh. Tekhnol. Silikatov, No. 4, 25 – 29 (2016).
V. A. Smolii, E. A. Yatsenko, A. S. Kosarev, and L. V. Klimova, “Study of the spectrophotometric characteristics of a decorative layer of a multi-layer silicate composite heat-insulation material,” Tekh. Tekhnol. Silikatov, No. 4, 23 – 28 (2017).
V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Dependence of the heat-insulating and strength properties of lightweight concrete on the fractional composition of the porous aggregate,” Ékol. Prom. Proiz-va, No. 4, 13 – 15 (2017).
E. A. Yatsenko, A. P. Zubekhin, V. A. Smolii, et al., “Resource-conserving technology of heat-insulation-decorative glass-composite material based on ash-slag wastes,” Steklo Keram., No. 6, 34 – 38 (2015); E. A. Yatsenko, A. P. Zubekhin, V. A. Smolii, et al., “Resource-conserving technology of heat-insulation-decorative glass-composite material based on ash-slag wastes,” Glass Ceram., 72(5 – 6), 216 – 219 (2015).
V. A. Smolii, A. S. Kosarev, E. A. Yatsenko, and B. M. Goltsman, “Development of a production technology for an efficient energy-saving cellular heat-insulating building glass material,” in: Izv. Vyssh. Ucheb. Zaved., Severo-Kavkaz. Region, Ser. Tekh. Nauki, No. 4 (185), 128 – 132 (2015).
E. A. Yatsenko, V. A. Smolii, B. M. Goltsman, and A. S. Kosarev, “Study of macro- and microstructures of foam glass based on TPP slag waste,” Izv. Vyssh. Ucheb. Zaved., Severo-Kavkaz. Region, Ser. Tekh. Nauki, No. 6, 127 – 130 (2012).
V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Influence of granulometric composition of batch on technological and physical-chemical properties of granular porous silicate aggregate,” Steklo Keram., No. 8, 12 – 15 (2017); V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Influence of granulometric composition of batch on technological and physical-chemical properties of granular porous silicate aggregate,” Glass Ceram., 74(7 – 8), 270 – 273 (2017).
V. A. Smolii, E. A. Yatsenko, A. S. Kosarev, and B. M. Goltsman, “Dependence of the formation rate of the porous structure of the heat-insulating silicate material on the content of ash and slag waste,” Ékol. Prom. Proiz-va, No. 3, 2 – 5 (2016).
E. A. Yatsenko, A. P. Zubekhin, B. M. Goltsman, et al., “Investigation of factors affecting the properties and structure of foam glass and glass,” Steklo Keram., No. 4, 3 – 6 (2014); E. A. Yatsenko, A. P. Zubekhin, B. M. Goltsman, et al., “Investigation of factors affecting the properties and structure of foam glass and glass,” Glass Ceram., 71(3 – 4), 111 – 114 (2014).
A. P. Zubekhin, S. P. Golovanova, E. A. Yatsenko, et al., Fundamentals of the Technology of Refractory Non-Metallic and Silicate Materials [in Russian], KARTEK, Moscow (2010).
V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of the porous structure in foam glass,” Steklo Keram., No. 3, 14 – 17 (2002); V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of the porous structure in foam glass,” Glass Ceram., 59(3 – 4), 89 – 93 (2002).
N. I. Minko, O. V. Puchka, E. I. Evtushenko, et al., “Foam glass: a modern efficient inorganic heat-insulation material,” Fundam. Issled., No. 6, 849 – 854 (2013).
V. S. Bessmertnyi, O. V. Puchka, V. B. Krakht, et al., “Foam glass with a protective-decorative coating,” Sovr. Probl. Nauki obraz., No. 1 (2009); URL: http://science-education.ru/ru/article/view?id=1676
P. A. Ketov, “Development of environmentally safe energy-efficient building cellular material satisfying the principles of green construction,” Vest. MGSU, 13[3(114)], 368 – 377 (2018).
This work was performed at YuRGPU (NPI) with financial support from the Russian Science Foundation under contract No. 18-19-00455 ‘Development of a technology for comprehensive protection of oil and gas pipelines operated in the Far East of Russia’ (E. A. Yatsenko, lead researcher), item ‘Investigation of the particulars of foaming of compositions based on the chosen raw materials taking account of their chemical, granulometric, and phase compositions. Development of the optimal composition of batch for the synthesis of foam-glass materials based on local raw materials.’
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 10, pp. 19 – 22, October, 2018.
Rights and permissions
About this article
Cite this article
Yatsenko, E.A., Smolii, V.A., Gol’tsman, B.M. et al. Optimal Fractional Composition of Batch for Synthesis of Foam-Glass Materials Based on Diatomite from the Chernoyarskoe Deposit. Glass Ceram 75, 391–393 (2019). https://doi.org/10.1007/s10717-019-00092-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-019-00092-8