Abstract
Uniaxial compression tests were conducted on quartz mica schist in a laboratory to study the brittle failure modes of foliated rocks. By focusing on the crack evolution pattern, the failure mechanisms of foliated rocks were investigated by numerical tests based on particle discrete element theory. Furthermore, the effect of fabric on the mechanical anisotropy of foliated rocks was explored. The results indicated that the failure of foliated rocks subjected to uniaxial compression is heavily controlled by the rock fabric, exhibiting complex modes depending on the loading direction, including axial tensile fracture, oblique shear fracture, conical shear fracture, slip shear failure and splitting failure. Cracks initiated in the compressed rocks are induced from the contact surfaces of granular and flaky minerals and from the tips of flaky minerals. The crack initiation of foliated rocks, attributed to the concentration of tensile stress within the rock, responds to the loading direction in terms of the induced mechanism. When α = 90°, 45° and 0°, crack initiation depends on the differences in the mechanical properties of different minerals, the slipping of flaky minerals, and the kinking of flaky minerals, respectively. The formation of primary fracture planes results from tension crack coalescence + shear crack connection (α = 90°), shear crack or tension‒shear composite crack connection (α = 45°), and tension crack coalescence (α = 0°). As the orientation degree of flaky minerals decreases, the failure mode experiences a gradual decrease in sensitivity to the loading direction, and the curve of strength variation with orientation angle changes from U-shaped to shoulder-shaped or wave-shaped, accompanied by a decreasing anisotropy degree of rock strength.
Similar content being viewed by others
Data Availability
This statement is accurate. Furthermore, please ensure that the first affiliation of the corresponding author is “Hubei University of Arts and Science”.
References
Agarwal A, Poelchau MH, Kenkmann T, Rae A, Ebert M (2019) Impact experiment on gneiss: the effects of foliation on cratering process. J Geophys Res: Solid Earth 124(12):13532–13546
Anderson EK, Song WJ, Johnson SE, Cruz-Uribe AM (2021) Mica kink-band geometry as an indicator of coseismic dynamic loading. Earth Planet Sci Lett 567:117000
Bao H, Chen ZY, Lan HX, Pei RS (2022) Progressive failure strength characteristics of anisotropic rocks caused by mineral directional arrangement: a case of biotite quartz schist. Rock Soil Mech 43(8):2060–2070 (in Chinese)
Baud P, Louis L, David C, Rawling GC, Wong TF (2005) Effects of bedding and foliation on mechanical anisotropy, damage evolution and failure mode. Geol Soc Lond Spec Publ 245:223–249
Berčáková A, Melichar R, Souček K (2020) Mechanical properties and failure patterns of migmatized gneiss with metamorphic foliation under UCS test. Rock Mech Rock Eng 53:2007–2013
Cao P, Cao RH, Zhao YL, Zhang K, Pu CZ, Fan WC (2016) Propagation-coalescence and rheologic fracture behavior of rock cracks. Chin J Nonferrous Met 26(8):1737–1762 (in Chinese)
Chen PY (2018) Research progress on PFC2D simulation of crack propagation characteristics of cracked rock. J Eng Geol 26(2):528–539 ((in Chinese))
Chen ZQ, He C, Xu GW, Ma GY, Wu D (2019) A case study on the asymmetric deformation characteristics and mechanical behavior of deep-buried tunnel in phyllite. Rock Mech Rock Eng 52:4527–4545
Cho JW, Kim H, Jeon S, Min KB (2012) Deformation and strength anisotropy of Asan Gneiss, Boryeong Shale, and Yeoncheon schist. Int J Rock Mech Min Sci 50:158–169
Diederichs MS (2000) Instability of hard rock masses: the role of tensile damage and relaxation, PhD Thesis, University of Waterloo
Diederichs MS, Kaiser PK, Eberhardt E (2004) Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotation. Int J Rock Mech Min Sci 41(5):785–812
Duveau G, Shao JF, Henry JP (1998) Assessment of some failure criteria for strongly anisotropic geomaterials. Mech Cohes-Frict Mater 3(1):1–26
Gottschalk RR, Kronenberg AK, Russell JE, Handin J (1990) Mechanical anisotropy of gneiss: failure criterion and textural sources of directional behavior. J Geophys Res: Solid Earth 95(B13):21613–21634
Horii H, Nasser SN (1985) Compression-induced microcrack growth in brittle solids’ axial splitting and shear failure. J Phys Res 90(B4):3105–3125
Huang SL, Zhong PJ, Ding XL (2021) Study on characteristic strength anisotropy of layered chlorite schist under uniaxial compression. Chin J Rock Mechan Eng 40(supp 2):3182–3190 ((in Chinese))
Li ZG, Xu GL, Huang P, Zhao X, Fu YP, Su C (2018) Mechanical and anisotropic properties of silty slates. Rock Soil Mech 39(5):1737–1746 (in Chinese)
Lin QB, Cao P, Wen GP, Meng JJ, Cao RH, Zhao ZY (2021) Crack coalescence in rock-like specimens with two dissimilar layers and pre-existing double parallel joints under uniaxial compression. Int J Rock Mech Min Sci 139:104621
Liu XF, Feng XT, Zhou YY (2023) Influences of schistosity structure and differential stress on failure and strength behaviors of an anisotropic foliated rock under true triaxial compression. Rock Mech Rock Eng 56:1273–1287
Peng S, Johnson AM (1972) Crack growth and faulting in cylindrical specimens of Chelmsford Granite. Int J Rock Mech Min Sci 9:37–86
Ramamurthy T, Rao GV, Singh J (1993) Engineering behaviour of phyllites. Eng Geol 33(3):209–225
Rawling GC, Baud P, Tengfong W (2002) Dilatancy, brittle strength, and anisotropy of foliated rocks: experimental deformation and micromechanical modeling. J Phys Res 107(B10):2234–2247
Reches Z, Lockner DA (1994) Nucleation and growth of faults in brittle rocks. J Geophys Res: Solid Earth 99(B9):18159–18173
Shea WT, Kronenberg AK (1992) Rheology and deformation mechanisms of an isotropic mica schist. J Geophys Res: Solid Earth 97(B11):15201–15237
Tang Y, Okubo S, Xu J, Peng SJ (2019) Progressive failure behaviors and crack evolution of rocks under triaxial compression by 3D digital image correlation. Eng Geol 249(31):172–185
Tapponnier P, Brace WF (1976) Development of stress-induced microcracks in Westerly Granite. Int J Rock Mech Min Sci 13(4):103–112
Tien YM, Kuo MC, Juang CH (2006) An experimental investigation of the failure mechanism of simulated transversely isotropic rocks. Int J Rock Mech Min Sci 43:1163–1181
Wang Y, Li CH, Hao J, Zhou RQ (2018) X-ray micro-tomography for investigation of meso-structural changes and crack evolution in Longmaxi formation shale during compressive deformation. J Petrol Sci Eng 164:278–288
Wang YQ, Peng K, Shang XY, Li LP, Liu ZP, Wu Y, Long K (2021) Experimental and numerical simulation study of crack coalescence modes and microcrack propagation law of fissured sandstone under uniaxial compression. Theoret Appl Fract Mech 115:103060
Wen GP, Hu JH, Wu YB, Zhang ZX, Xu X, Xiang R (2022) Mechanical properties and failure behavior of dry and water-saturated foliated phyllite under uniaxial compression. Materials 15:8962
Wong TF, Biegel R (1985) Effects of pressure on the micromechanics of faulting in San Marcos Gabbro. J Struct Geol 7:737–749
Wong RHC, Chau KT (1997) The coalescence of frictional cracks and the shear zone formation in brittle solids under compressive stresses. Int J Rock Mech Min Sci 34(3):335. e1-335. e12
Yang SQ, Huang YH, Tian WL, Zhu JB (2017) An experimental investigation on strength, deformation and crack evolution behavior of sandstone containing two oval flaws under uniaxial compression. Eng Geol 217:35–48
Yin XM, Yan EC, Wang LN, Chen L (2019) Quantitative microstructure information extraction and microscopic morphology analysis of anisotropic schist. Rock Soil Mech 40(7):2617–2627 ((in Chinese))
Yin XM, Yan EC, Wang LN, Liu LC, Feng B, Wang PZ (2020) Anisotropy of quartz mica schist based on quantitative extraction of fabric information. Bull Eng Geol Environ 79(5):2439–2456
Yin XM, Zhang X, Lei YJ, Wang LN (2021) Effect of loading direction on the critical characteristic strength and energy evolution of quartz mica schist and microscale mechanisms. Bull Eng Geol Environ 80:8693–8710
Yin XM, Zhang X, Lei YJ, Wang LN (2022a) Linear failure criterion for estimating the compressive strength of brittle foliated rocks in response to the loading direction. Bull Eng Geol Environ 81:189
Yin XM, Zhang AM, Zhang X (2022b) A review of the influence of microscopic characteristics on the progressively brittle failure of foliated rocks subjected to compression loading. Geotech Geol Eng 40:1663–1673
Zhang AM (2022) Microscopic characteristics of schist and its effect on anisotropy of uniaxial compressive strength based on particle flow simulation, Master Thesis, Xinyang Normal University
Zhang ZQ, Chen FF, Li N, Xu Q, Hao ZY (2020) Failure mode and stress field of rock sample with two non-coplane pre-cracks. Chin J Appl Mech 37(5):2280–2287 ((in Chinese))
Zhao YL, Wan W, Wang WJ, Wang M, Peng QY (2013) Fracture experiments on ordered multi-crack body in rock-like materials under uniaxial compression and numerical simulation of wing cracks. Chin J Geotech Eng 35(11):2097–2109 (in Chinese)
Zhou T, Chen JR, Xie HP, Zhou CT, Wang F, Zhu JB (2022) Failure and mechanical behaviors of sandstone containing a pre-existing flaw under compressive–shear loads: insight from a digital image correlation (DIC) analysis. Rock Mech Rock Eng 55:4237–4256
Acknowledgements
This research is financially supported by the Natural Science Foundation of China (Grant No. 52074112 and 41807240) and Hubei Provincial Natural Science Foundation (No. 2023AFB607) and Hubei Key Laboratory of Disaster Prevention and Mitigation (China Three Gorges University) Open Fund (No. 2022KJZ04) and Hubei Superior and Distinctive Discipline Group of “New Energy Vehicle and Smart Transportation”. The author gratefully acknowledges the financial support provided by them.
Funding
The authors have not disclosed any funding.
Author information
Authors and Affiliations
Contributions
YH and XY wrote original draft preparation and finished all drawing; EY and YL revised the manuscript; KS polished the manuscript. All authors have read and agreed to the published version of the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
We declare that we have no conflict of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Huang, Y., Yin, X., Yan, Ec. et al. Brittle Failure Modes and Mechanisms in Foliated Rock Under Uniaxial Compression: Laboratory Testing and Particle Flow Modeling. Geotech Geol Eng 42, 2861–2880 (2024). https://doi.org/10.1007/s10706-023-02710-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-023-02710-3