Abstract
In the process of sensorless control of brushless DC motor, the scope of the motor is limited by the traditional method for the detecting the rotor position of the EMF. In order to solve the problem, a new method of detecting the rotor position with zero crossing detection is proposed. Using H_PWM-L_ON pulse width modulation method, according to the two kinds situations of the high speed of the motor and low speed, different sampling method are chosen which accurate detection of anti electric potential over zero. At the same time, one end staying away from the fault of a voltage divider connected to the comparator is connected to the I/O of STM32, the connection method of the voltage resistance of the motor at different speeds is different by controlling the I/O port. The control improves the effect of the motor at different speeds over the zero crossing detection signal, so as to expand the scope of the motor. Through the experimental verification, the method can make the motor work in a wider range, and it has a certain feasibility and validity.
Similar content being viewed by others
References
Lin, D., Wang, J., Tian, L.F.: New detection method for back electromotive force (BEMF) of brushless direct-current (BLDC) motor without position sensor. Instrum. Tech. Sens. 07, 77–79 (2012)
Yang, Y., Ruan, Y., Sheng-gui, T.: Research on novel approach to rotor position detection of brushless DC motors. Electr. Mach. Control 14(02), 60–64 (2010)
Zhiqiang, L., Changliang, X., Wei, C.: A position sensorless control strategy for BLDCM based on line back-EMF. Trans. China Electrotech. Soc. 25(07), 38–44 (2010)
Lin, F., Zhou, X., Zeng, W.: Sparse online learning for collaborative filtering. Int. J. Comput. Commun. Control 11(2), 248–258 (2016)
Xue, X., Yang, C.: A unified approach to direct back EMF detection for brushless DC motor. Trans. China Electrotech. Soc. 25(09), 62–68 (2010)
Li, Z., Cheng, S., Qin, Y.: Novel rotor position detection method of line back EMF for BLDCM. Electr. Mach. Control 14(12), 96–100 (2010)
Zhu, R., Shu, W., Mao, T., Deng, T.: Enhanced MAC protocol to support multimedia traffic in cognitive wireless mesh networks. Multimed. Tools Appl. 67(1), 269–288 (2013)
Jibin, Z., Shanlin, J., Hongliang, Z.: A novel method of detecting for rotor position of a sensorless brushless DC motor. Trans. China Electrotech. Soc. 24(04), 48–53 (2009)
Changliang, X., Hongwei, F.: Permanent-magnet brushless DC motor and its control. Trans. China Electrotech. Soc. 27(03), 25–34 (2012)
Li, X., Luo, C., Shen, Z., et al.: Sensorless control of Hi-speed brushless DC motor with back-EMF. Measurement 47(05), 31–35 (2014)
Lin, F., Zeng, W., Yang, L., Wang, Y., et al.: Cloud computing system risk estimation and service selection approach based on cloud focus theory. Neural Comput. Appl. 28(7), 1863–1876 (2017)
Wang, D., Zhu, Y., Jin, Y., et al.: A novel research on detectin position of brushless DC motors. Trans. China Electrotech. Soc. 28(02), 139–144 (2013)
Junjie, Z., Mei, S., Cheng, C.: Novel BEMF zero-crossing detecting method for brushless DC motor. Chin. J. Sci. Instrum. 34(02), 441–447 (2013)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sun, L. A new method for sensorless control of brushless DC motor. Cluster Comput 22 (Suppl 2), 2793–2800 (2019). https://doi.org/10.1007/s10586-017-1504-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10586-017-1504-1