Abstract
In recent years, solving environmental problems has become an urgent task with the drain of materials based on exhaustible petroleum and the aggravation of environmental pollution. Environment-friendly material has attracted much attention such as natural plant fiber reinforced composites. Bamboo fiber, as a number of natural plant fiber, possesses many excellent properties including low density, low cost, high strength, renewability and complete degradability. But there are few review articles about bamboo fiber reinforced composites and most of them are classified according to materials especially lack of interfacial bonding mechanism. To attack these problems, this review will not only discuss the preparation and performance of bamboo fiber reinforced polymer composites but also take a profound look at their interfacial bonding mechanism. This review will also explore characteristics and processes of physical and chemical modification. Synergism of physical and chemical reactions receives increasing attention. Finally, the opportunities and challenges of bamboo fiber reinforced polymer composites are presented. We hope that this paper will provide a serviceable review for future research on BF reinforced polymer.
This is a preview of subscription content, log in via an institution to check access.
reproduced with permission from John Wiley and Sons
reproduced with permission from John Wiley and Sons. (Jin et al. 2020)
reproduced with permission from Elsevier. (Zuo et al. 2020)
reproduced with permission from John Wiley and Sons
modified by physical and chemical reactions simultaneously
Similar content being viewed by others
Change history
27 November 2021
A Correction to this paper has been published: https://doi.org/10.1007/s10570-021-04329-0
References
Abdelmouleh M, Boufi S, Belgacem MN et al (2005) Modification of cellulose fibers with functionalized silanes: effect of the fiber treatment on the mechanical performances of cellulose–thermoset composites. J Appl Polym Sci 98(3):974–984. https://doi.org/10.1002/app.22133
Abdelmouleh M, Boufi S, Belgacem MN et al (2004) Modification of cellulosic fibres with functionalised silanes: development of surface properties. Int J Adhes Adhes 24(1):43–54. https://doi.org/10.1016/S0143-7496(03)00099-X
Abdullah ZW, Yu D (2019) Biodegradable and water resistant poly (vinyl) alcohol (PVA)/starch (ST)/glycerol (GL)/halloysite nanotube (HNT) nanocomposite films for sustainable food packaging. Front Mater 6:58. https://doi.org/10.3389/fmats.2019.00058
Adamu M, Rahman MR, Bakri MKB et al (2020a) Characterization and optimization of mechanical properties of bamboo/nanoclay/polyvinyl alcohol/styrene nanocomposites using response surface methodology. J Vinyl Addit Techn 27(1):147–160. https://doi.org/10.1002/vnl.21792
Adamu M, Rahman MR, Hamdan S et al (2020b) Impact of polyvinyl alcohol/acrylonitrile on bamboo nanocomposite and optimization of mechanical performance by response surface methodology. Constr Build Mater 258:119693. https://doi.org/10.1016/j.conbuildmat.2020.119693
Adamu M, Rahman MR, Hamdan S (2019) Formulation optimization and characterization of bamboo/polyvinyl alcohol/clay nanocomposite by response surface methodology. Compos Part B-Eng 176:107297. https://doi.org/10.1016/j.compositesb.2019.107297
Aruchamy K, Pavayee Subramani S, Palaniappan SK et al (2020) Study on mechanical characteristics of woven cotton/bamboo hybrid reinforced composite laminates. J Mater Res Technol 9(1):718–726. https://doi.org/10.1016/j.jmrt.2019.11.013
Bengtsson M, Oksman K (2006) Silane crosslinked wood plastic composites: Processing and properties. Compos Sci Technol 66(13):2177–2186. https://doi.org/10.1016/j.compscitech.2005.12.009
Besi MKS (2013) A review on mechanical properties of bamboo fiber reinforced polymer composite. Aust J Basic Appl Sci 7(8):247–253
Bino Prince Raja D, Shakthi Prasad M, Ramanan G (2020) Influence of nanoparticles on mechanical and thermal characterization of hybrid fiber reinforced polyester composites. Materials Today: Proc 24:1498–1507. https://doi.org/10.1016/j.matpr.2020.04.469
Bogoeva-Gaceva G, Avella M, Malinconico M et al (2007) Natural fiber eco-composites. Polym Composite 28(1):98–107. https://doi.org/10.1002/pc.20270
Cai M, Takagi H, Nakagaito AN et al (2016) Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites. Compos Part A-Appl S 90:589–597. https://doi.org/10.1016/j.compositesa.2016.08.025
Chaowana P (2013) Bamboo: an alternative raw material for wood and wood-based composites. J Mater Res 2(2):90. https://doi.org/10.5539/jmsr.v2n2p90
Chattopadhyay SK, Khandal RK, Uppaluri R et al (2011) Bamboo fiber reinforced polypropylene composites and their mechanical, thermal, and morphological properties. J Appl Polym Sci 119(3):1619–1626. https://doi.org/10.1002/app.32826
Chee SS, Jawaid M, Alothman OY et al (2021) Effects of nanoclay on mechanical and dynamic mechanical properties of bamboo/kenaf reinforced epoxy hybrid composites. Polymers (basel) 13(3):395. https://doi.org/10.3390/polym13030395
Chee SS, Jawaid M, Alothman OY et al (2020a) Thermo-oxidative stability and flammability properties of bamboo/kenaf/nanoclay/epoxy hybrid nanocomposites. RSC Adv 10(37):21686–21697. https://doi.org/10.1039/d0ra02126a
Chee SS, Jawaid M, Sultan MTH et al (2020b) Effects of nanoclay on physical and dimensional stability of Bamboo/Kenaf/nanoclay reinforced epoxy hybrid nanocomposites. J Mater Res Technol 9(3):5871–5880. https://doi.org/10.1016/j.jmrt.2020.03.114
Chen L, Li Y, Du Q et al (2017) High performance agar/graphene oxide composite aerogel for methylene blue removal. Carbohydr Polym 155:345–353. https://doi.org/10.1016/j.carbpol.2016.08.047
Chen T, Wu Y, Qiu J et al (2020) Interfacial compatibilization via in-situ polymerization of epoxidized soybean oil for bamboo fibers reinforced poly(lactic acid) biocomposites. Compos Part A-Appl S 138. https://doi.org/10.1016/j.compositesa.2020.106066
Cheng H, Gao J, Wang G et al (2015) Enhancement of mechanical properties of composites made of calcium carbonate modified bamboo fibers and polypropylene. Holzforschung 69(2):215–221. https://doi.org/10.1515/hf-2014-0020
Das M, Pal A, Chakraborty D (2006) Effects of mercerization of bamboo strips on mechanical properties of unidirectional bamboo–novolac composites. J Appl Polym Sci 100(1):238–244. https://doi.org/10.1002/app.23028
Dinesh PS (2019) Structure and properties of recycled bamboo fiber reinforced chemically functionalized ethylene propylene rubber composites. Polym Polym Compos 28(8–9):609–622. https://doi.org/10.1177/0967391119894112
Essabir H, Bensalah MO, Rodrigue D et al (2017) A comparison between bio- and mineral calcium carbonate on the properties of polypropylene composites. Constr Build Mater 134:549–555. https://doi.org/10.1016/j.conbuildmat.2016.12.199
Fajardo Cabrera de Lima LP, Chamorro Rodríguez CD, Mina Hernandez JH (2021) Use of organic acids in bamboo fiber-reinforced polypropylene composites: mechanical properties and interfacial morphology. Polymers-Basel 13(12):2007. https://doi.org/10.3390/polym13122007
Fei M-E, Xie T, Liu W et al (2017) Surface grafting of bamboo fibers with 1,2-epoxy-4-vinylcyclohexane for reinforcing unsaturated polyester. Cellulose 24(12):5505–5514. https://doi.org/10.1007/s10570-017-1497-1
Fiorelli J, Lahar FAR, Nascimento MFd et al (2011) Painéis de partículas à base de bagao de cana e resina de mamona – produo e propriedades. Acta Sci-Technol 33(4):401. https://doi.org/10.4025/actascitechnol.v33i4.9615
Gao ZN, Jiang XB, Guo K (2012) Study of the hydrolysis of 3aminopropyltriethoxysilane (KH550) and the surface modification of silica. J Beijing Univ Chem Technol 39(2):7–12. https://doi.org/10.13543/j.cnki.bhxbzr.2012.02.008
García-Cubero MT, Coca M, Bolado S (2010) Chemical oxidation with ozone as pre-treatment of lignocellulosic materials for bioethanol production. Chem Eng Trans. https://doi.org/10.3303/CET1021213
Gu F, Zheng Y, Zhang W et al (2018) Can bamboo fibres be an alternative to flax fibres as materials for plastic reinforcement? a comparative life cycle study on polypropylene/flax/bamboo laminates. Ind Crop Prod 121:372–387. https://doi.org/10.1016/j.indcrop.2018.05.025
Gu H (2009) Tensile behaviours of the coir fibre and related composites after NaOH treatment. Mater Design 30(9):3931–3934. https://doi.org/10.1016/j.matdes.2009.01.035
Guan M, Yong C, Wang L (2013) Shear strain and microscopic characterization of a bamboo bonding interface with poly(vinyl alcohol) modified phenol-formaldehyde resin. J Appl Polym Sci 130(2):1345–1350. https://doi.org/10.1002/app.39256
Guo X, Wang Y, Ren YL et al (2021) Fabrication of flame retardant lyocell fibers based on carboxymethylation and aluminum ion chelation. Cellulose 28:6679–6698. https://doi.org/10.1007/s10570-021-03975-8
Han G, Lei Y, Wu Q et al (2008) Bamboo–fiber filled high density polyethylene composites: effect of coupling treatment and nanoclay. J Polym Environ 16(2):123–130. https://doi.org/10.1007/s10924-008-0094-7
Hong G, Cheng H, Meng Y et al (2018) Mussel-inspired polydopamine as a green, efficient, and stable platform to functionalize bamboo fiber with amino-terminated alkyl for high performance poly(butylene succinate) composites. Polymers (basel) 10(4):461. https://doi.org/10.3390/polym10040461
Jena H, Pradhan AK, Pandit MK (2018) Study of solid particle erosion wear behavior of bamboo fiber reinforced polymer composite with cenosphere filler. Adv Polym Tech 37(3):761–769. https://doi.org/10.1002/adv.21718
Jin X, Xiang E, Zhang R et al (2020) Halloysite nanotubes immobilized by chitosan/tannic acid complex as a green flame retardant for bamboo fiber/poly(lactic acid) composites. J Appl Polym Sci 138(1):49621. https://doi.org/10.1002/app.49621
Jin X, Zhang X, Xu C et al (2019) Effect of bamboo fibers with different coupling agents on the properties of poly(hydroxybutyrate-co-valerate) biocomposites. J Appl Polym Sci 36(20):47533. https://doi.org/10.1002/app.47533
Khalil A, Ps H (2015) 16–the use of bamboo fibres as reinforcements in composites. Biofiber Reinforcements Compos Mater. https://doi.org/10.1533/9781782421276.4.488
Khalil H, Bhat I, Jawaid M et al (2012) Bamboo fibre reinforced biocomposites: a review. Mater Design 42:353–368. https://doi.org/10.1016/j.matdes.2012.06.015
Kim B-J, Yao F, Han G et al (2012) Performance of bamboo plastic composites with hybrid bamboo and precipitated calcium carbonate fillers. Polym Composite 33(1):68–78. https://doi.org/10.1002/pc.21244
Ku H, Wang H, Pattarachaiyakoop N et al (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Compos Part B-Eng 42(4):856–873. https://doi.org/10.1016/j.compositesb.2011.01.010
Kushwaha PK, Kumar R (2010a) Bamboo fiber reinforced thermosetting resin composites: effect of graft copolymerization of fiber with methacrylamide. J Appl Polym Sci 118(2):1006–1013. https://doi.org/10.1002/app.32466
Kushwaha PK, Kumar R (2011) Reinforcing effect of nanoclay in bamboo-reinforced thermosetting resin composites. Polym-Plast Technol 50(2):127–135. https://doi.org/10.1080/03602559.2010.512350
Kushwaha PK, Kumar R (2010b) Studies on water absorption of bamboo-epoxy composites: Effect of silane treatment of mercerized bamboo. J Appl Polym Sci 115(3):1846–1852. https://doi.org/10.1002/app.31317
Lee S-Y, Chun S-J, Doh G-H et al (2009) Influence of chemical modification and filler loading on fundamental properties of bamboo fibers reinforced polypropylene composites. J Compos Mater 43(15):1639–1657. https://doi.org/10.1177/0021998309339352
Li Y, Moyo S, Ding Z et al (2013) Helium plasma treatment of ethanol-pretreated ramie fabrics for improving the mechanical properties of ramie/polypropylene composites. Ind Crop Prod 51:299–305. https://doi.org/10.1016/j.indcrop.2013.09.028
Li Z, Chen C, Mi R et al (2020) A strong, tough, and scalable structural material from fast-growing bamboo. Adv Mater 32(10):e1906308. https://doi.org/10.1002/adma.201906308
Liew FK, Hamdan S, Rahman MR et al (2018) The effects of nanoclay and tin (IV) oxide nanopowder on morphological, thermo-mechanical properties of hexamethylene diisocyanate treated jute/bamboo/polyethylene hybrid composites. J Vinyl Addit Techn 24(4):358–366. https://doi.org/10.1002/vnl.21600
Liew FK, Hamdan S, Rahman MR et al (2020) Thermo-mechanical properties of jute/bamboo/polyethylene hybrid composites: the combined effects of silane coupling agent and copolymer. Polym Composite 41(11):4830–4841. https://doi.org/10.1002/pc.25755
Liu D, Song J, Anderson DP et al (2012) Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19(5):1449–1480. https://doi.org/10.1007/s10570-012-9741-1
Liu H, Jin J, Yu Y et al (2020) Influence of halloysite nanotube on hydration products and mechanical properties of oil well cement slurries with nano-silica. Constr Build Mater 247:118545. https://doi.org/10.1016/j.conbuildmat.2020.118545
Lu C, Lu Z, Li Z et al (2016) Effect of graphene oxide on the mechanical behavior of strain hardening cementitious composites. Constr Build Mater 120:457–464. https://doi.org/10.1016/j.conbuildmat.2016.05.122
Mamleeva NA, Kharlanov AN, Chukhchin DG et al (2021) Degradation of the pine wood structure in ozonolytic delignification. Russ J Bioorg Chem 46(7):1330–1336. https://doi.org/10.1134/S1068162020070080
Md Shah AU, Sultan MTH, Jawaid M (2021) Sandwich-structured bamboo powder/glass fibre-reinforced epoxy hybrid composites–mechanical performance in static and dynamic evaluations. J Sandw Struct Mater 23(1):47–64. https://doi.org/10.1177/1099636218822740
Meng Y, Wang M, Tang M et al (2017) Preparation of robust superhydrophobic halloysite clay nanotubes via mussel-inspired surface modification. Appl Sci 7(11):1129. https://doi.org/10.3390/app7111129
Negawo TA, Polat Y, Akgul Y et al (2021) Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites. Compos Struct 259:113221. https://doi.org/10.1016/j.compstruct.2020.113221
Omar Faruka AKB, Finkb H-P, Saind M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 37:1552–1596. https://doi.org/10.1016/j.progpolymsci.2012.04.003
Orue A, Jauregi A, Unsuain U et al (2016) The effect of alkaline and silane treatments on mechanical properties and breakage of sisal fibers and poly(lactic acid)/sisal fiber composites. Compos Part A-Appl S 84:186–195. https://doi.org/10.1016/j.compositesa.2016.01.021
Osong SH, Norgren S, Engstrand P (2015) Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose 23(1):93–123. https://doi.org/10.1007/s10570-015-0798-5
Panaitescu DM, Nicolae CA, Vuluga Z et al (2016) Influence of hemp fibers with modified surface on polypropylene composites. J Ind Eng Chem 37:137–146. https://doi.org/10.1016/j.jiec.2016.03.018
Panaitescu DM, Vuluga Z, Ghiurea M et al (2015) Influence of compatibilizing system on morphology, thermal and mechanical properties of high flow polypropylene reinforced with short hemp fibers. Compos Part B-Eng 69:286–295. https://doi.org/10.1016/j.compositesb.2014.10.010
Patel K, Patel J, Gohil P et al (2018) Effect of nano clay on mechanical behavior of bamboo fiber reinforced polyester composites. Appl Mech Mater 877:294–298.
Penellum M, Sharma B, Shah DU et al (2018) Relationship of structure and stiffness in laminated bamboo composites. Constr Build Mater 165:241–246. https://doi.org/10.1016/j.conbuildmat.2017.12.166
Pujokaroni AS, Ohtani Y, Ichiura H (2020) Ozone treatment for improving the solubility of cellulose extracted from palm fiber. J Appl Polym Sci 138(1):49610. https://doi.org/10.1002/app.49610
For the most part doi: https://doi.org/10.1016/j.ijbiomac.2020.05.170
Reale Batista MD, Drzal LT (2020) Surface modification of bamboo fiber with sodium hydroxide and graphene oxide in epoxy composites. Polym Composite 42(3):1135–1147. https://doi.org/10.1002/pc.25888
Ren D, Zhang XX, Wang HK et al (2016) Improving thermo-oxidative degradation resistance of bamboo fiber reinforced polymer composites with antioxidants part II: effect on other select properties. J Appl Polym Sci 133:46. https://doi.org/10.1002/app.44199
Rokbi M, Osmani H, Imad A et al (2011) Effect of chemical treatment on flexure properties of natural fiber-reinforced polyester composite. Procedia Eng 10:2092–2097. https://doi.org/10.1016/j.proeng.2011.04.346
Saba N, Paridah MT, Jawaid M (2015) Mechanical properties of kenaf fibre reinforced polymer composite: a review. Constr Build Mater 76:87–96. https://doi.org/10.1016/j.conbuildmat.2014.11.043
Sánchez ML, Capote G, Carrillo J (2019) Composites reinforced with guadua fibers: physical and mechanical properties. Constr Build Mater 228:116749. https://doi.org/10.1016/j.conbuildmat.2019.116749
Sánchez ML, Capote G, Patiño JP (2021) Effect of surface treatment of fibers on the accelerated aging of biocomposites. Constr Build Mater 271:121875. https://doi.org/10.1016/j.conbuildmat.2020.121875
Sanjay MR, Arpitha GR, Naik LL et al (2016) Applications of natural fibers and its composites: an overview. Nat Res 7(3):108–114. https://doi.org/10.4236/nr.2016.73011
Saxena M, Gowri VS (2003) Studies on bamboo polymer composites with polyester amide polyol as interfacial agent. Polym Composite 24(3):428–436. https://doi.org/10.1002/pc.10041
Sever K, Erden S, Gülec HA et al (2011) Oxygen plasma treatments of jute fibers in improving the mechanical properties of jute/HDPE composites. Mater Chem Phys 129(1–2):275–280. https://doi.org/10.1016/j.matchemphys.2011.04.001
Sharmin N, Hasan MS, Parsons AJ et al (2016) Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites. J Mech Behav Biomed Mater 59:41–56. https://doi.org/10.1016/j.jmbbm.2015.12.011
Sinha E, Panigrahi S (2009) Effect of plasma treatment on structure, wettability of jute fiber and flexural strength of its composite. J Compos Mater 43(17):1791–1802. https://doi.org/10.1177/0021998309338078
Sinha RK, Sridhar K, Purohit R et al (2020) Effect of nano SiO2 on properties of natural fiber reinforced epoxy hybrid composite: A review. Mater Today: Proc 26:3183–3186. https://doi.org/10.1016/j.matpr.2020.02.657
Sliwa F, N-e EB, Charrier F et al (2012) Mechanical and interfacial properties of wood and bio-based thermoplastic composite. Compos Sci Technol 72(14):1733–1740. https://doi.org/10.1016/j.compscitech.2012.07.002
Smith RJ, Holder KM, Ruiz S et al (2018) Environmentally benign halloysite nanotube multilayer assembly significantly reduces polyurethane flammability. Adv Funct Mater 28(27):1703289. https://doi.org/10.1002/adfm.201703289
Song X, Jiang Y, Rong X et al (2016) Surface characterization and chemical analysis of bamboo substrates pretreated by alkali hydrogen peroxide. Bioresour Technol 216:1098–1101. https://doi.org/10.1016/j.biortech2016.06.026
Srivabut C, Ratanawilai T, Hiziroglu S (2018) Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber. Constr Build Mater 162:450–458. https://doi.org/10.1016/j.conbuildmat.2017.12.048
Sugiman S, Martino A, Setyawan PD et al (2020) Tensile, flexural and water absorption properties of bamboo fiber/unsaturated polyester composites: effect of calcium carbonate content. Key Eng Mat 867:68–74.
Sun C, Liu A, Du G (2018) Plasma treatment of bamboo fibers on the tribological property of polyimide composite filled with graphite. Surf Interface Anal 50(2):234–239. https://doi.org/10.1002/sia.6362
Sun E, Sun F, Zhang Z et al (2016) Interface morphology and thermoplasticization behavior of bamboo fibers benzylated with benzyl chloride. Surf Interface Anal 48(2):64–72. https://doi.org/10.1002/sia.5889
Suwan A, Sukhawipat N, Uthaipan N et al (2020) Some properties of experimental particleboard manufactured from waste bamboo using modified recycled palm oil as adhesive. Prog Org Coat 149:105899. https://doi.org/10.1016/j.porgcoat.2020.105899
Scalici T, Valenza A (2016) Effect of plasma treatment on the properties of Arundo Donax L leaf fibres and its bio-based epoxy composites: a preliminary study. Compos Part B-Eng 94:167–175. https://doi.org/10.1016/j.compositesb.2016.03.053
Teli MD, Terega JM (2018) Effects of alkalization on the properties of Ensete ventricosum plant fibre. J Text I 110(4):496–507. https://doi.org/10.1080/00405000.2018.1492321
Vahabi H, Saeb MR, Formela K et al (2018) Flame retardant epoxy/halloysite nanotubes nanocomposite coatings: Exploring low-concentration threshold for flammability compared to expandable graphite as superior fire retardant. Prog Org Coat 119:8–14. https://doi.org/10.1016/j.porgcoat.2018.02.005
Velmurugan R, Mohan TP (2008) Epoxy-clay nanocomposites and hybrids: synthesis and characterization. J Reinf Plast Comp 28(1):17–37. https://doi.org/10.1177/0731684407081439
Venkata Chalapathi K, Jung-Il Song, Prabhakar MN (2020) Impact of surface treatments and hybrid flame retardants on flammability and thermal performance of bamboo fabric composites. J Nat Fibers 1–11. https://doi.org/10.1080/15440478.2020.1798849
Wang C, Cai L, Shi SQ et al (2019) Thermal and flammable properties of bamboo pulp fiber/high-density polyethylene composites: influence of preparation technology, nano calcium carbonate and fiber content. Renew Energ 134:436–445. https://doi.org/10.1016/j.renene.2018.09.051
Wang C, Wang S, Cheng H et al (2017a) Mechanical properties and prediction for nanocalcium carbonate-treated bamboo fiber/high-density polyethylene composites. J Mater Sci 52(19):11482–11495. https://doi.org/10.1007/s10853-017-1285-1
Wang C, Yu X, Smith LM et al (2017b) Interfacial properties of bamboo fiber-reinforced high-density polyethylene composites by different methods for adding nano calcium carbonate. Polymers (basel) 9(11):587. https://doi.org/10.3390/polym9110587
Wang J, Li J, Zhuang X et al (2018) Improved mould resistance and antibacterial activity of bamboo coated with ZnO/graphene. R Soc Open Sci 5(8):180173. https://doi.org/10.1098/rsos.180173
Wang Q, Zhang Y, Liang W et al (2020a) Improved mechanical properties of the graphene oxide modified bamboo-fiber-reinforced polypropylene composites. Polym Composite 41(9):3615–3626. https://doi.org/10.1002/pc.25648
Wang Y, Zuo M, Gao K et al (2020b) Effects of surface modification on the physical, mechanical, and thermal properties of bamboo polypropylene composites. BioResources 15(3):6230–6243. https://doi.org/10.15376/biores.15.3.6230-6243
Wu Y, Bian Y, Yang F et al (2019) Preparation and properties of chitosan/graphene modified bamboo fiber fabrics. Polymers (basel) 11(10):1540. https://doi.org/10.3390/polym11101540
Xu X, Wang Y, Zhang X et al (2006) Effects on surface properties of natural bamboo fibers treated with atmospheric pressure argon plasma. Surf Interface Anal 38(8):1211–1217. https://doi.org/10.1002/sia.2378
Ye H, Wang Q, Sun Q et al (2020) High energy density and interfacial polarization in poly(vinylidene fluoride-chlorotrifluoroethylene) nanocomposite incorporated with halloysite nanotube architecture. Colloid Surface A 606:125495. https://doi.org/10.1016/j.colsurfa.2020.125495
Zakikhani P, Zahari R, Sultan MTH et al (2014) Extraction and preparation of bamboo fibre-reinforced composites. Mater Design 63:820–828. https://doi.org/10.1016/j.matdes.2014.06.058
Zhang J, Zhang B, Chen X et al (2017) Antimicrobial bamboo materials functionalized with ZnO and graphene oxide nanocomposites. Materials (basel) 10(3):239. https://doi.org/10.3390/ma1.0030239
Zhang K, Wang F, Liang W et al (2018a) Mechanical properties of bamboo fiber reinforced epoxy composites. Polymers-Basel 10(6):608. https://doi.org/10.3390/polym10060608
Zhang S, Yao W, Zhang H et al (2018b) Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: the effect of blending ratio. Polym Composite 39:E640–E646. https://doi.org/10.1002/pc.24805
Zhang X, Zhang R, Xiang C et al (2019) Polydopamine-assisted formation of Co3O4-nanocube-anchored reduced graphene oxide composite for high-performance supercapacitors. Ceram Int 45(11):13894–13902. https://doi.org/10.1016/j.ceramint.2019.04.087
Zhang Y (2020) The application of bamboo fiber in automobile composites. Journal of Bamboo Research 39(2):89–93. https://doi.org/10.19560/j.cnki.issn1000-6567.2020.02.016
Zhao Z, Sui X, Liu X et al (2018) Study on mathematical model of compression performance of bamboo culm integrated bamboo bundles glulam beam
Zhou Z, Du C, Yu H et al (2020) Promotion effect of nano-SiO2 on hygroscopicity, leaching resistance and thermal stability of bamboo strips treated by nitrogen-phosphorus-boron fire retardants. Wood Res-Slovakia 65(5):693–704. https://doi.org/10.37763/wr.1336-4561/65.5.693704
Zhu EQ, Xu GF, Sun SF et al (2021) Rosin acid modification of bamboo powder and thermoplasticity of its products based on hydrothermal pretreatment. Adv Compos Hybrid Ma 1–7. https://doi.org/10.1007/s42114-021-00266-5
Zuo Y, Chen K, Li P et al (2020) Effect of nano-SiO2 on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite. Int J Biol Macromol 157:177–186. https://doi.org/10.1016/j.ijbiomac.2020.04.205
Acknowledgments
The study is supported by the Natural Science Foundation of China (Nos. 51103036,51203183), and the Key Foundation of Hunan Educational Committee(No. 20A158).
Author information
Authors and Affiliations
Contributions
The first draft of the manuscript was written by Lijuan Liu and Zhiqing Yuan. Principle analysis and information collection were performed by all authors. All authors read and approved the final manuscript.
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
High quality research that observes ethical standards is called for all authors.
Consent for publication
All authors agreed to the publication in the submitted form.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The original online version of this article was revised: Caption of figures 3, 4, 5, 6, 8, 10 and 11 are updated.
Rights and permissions
About this article
Cite this article
Liu, L., Yuan, Z., Fan, X. et al. A review of interfacial bonding mechanism of bamboo fiber reinforced polymer composites. Cellulose 29, 83–100 (2022). https://doi.org/10.1007/s10570-021-04242-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-021-04242-6