Abstract
High (14.9%), medium (2.4%) and low (0.1%) lignin-containing cellulosic fibers were processed through a micro-grinding method to mechanically produce lignocellulose nanofibrils (LCNFs). Effects of residual lignin on the mechanical defibrillation process were investigated in terms of the nanofibrils yields, the diameters of resultant LCNFs and the micro-grinding energy consumption. The results showed that the residual lignin delayed the initial defibrillation of cellulosic fibers due to its physical barrier. However, the residual lignin eventually facilitated the defibrillation and improved the maximum nanofibrils yields by 17.9–30.8%, and greatly reduced the diameters of the resultant LCNFs from 32.9 ± 7.7 to 9.2 ± 3.3 nm. The effects of lignin on counteracting the recombination reactions between the highly reactive cellulose radicals and hindering the aggregation of defibrillated fibrils through reducing the inter-fibrillar hydrogen bonding presumably resulted in the better eventual defibrillation of cellulosic fibrils.
Graphical abstract
Similar content being viewed by others
References
Alemdar A, Sain M (2008) Isolation and characterization of nanofibers from agricultural residues—wheat straw and soy hulls. Bioresour Technol 99:1664–1671. https://doi.org/10.1016/j.biortech.2007.04.029
Bai W, Holbery J, Li KC (2009) A technique for production of nanocrystalline cellulose with a narrow size distribution. Cellulose 16:455–465. https://doi.org/10.1007/s10570-009-9277-1
Besbes I, Vilar MR, Boufi S (2011) Nanofibrillated cellulose from alfa, eucalyptus and pine fibres: Preparation, characteristics and reinforcing potential. Carbohyd Polym 86:1198–1206. https://doi.org/10.1016/j.carbpol.2011.06.015
Browning BL (1967) Methods of wood chemistry. Wiley, New York
Chaker A, Alila S, Mutje P, Vilar MR, Boufi S (2013) Key role of the hemicellulose content and the cell morphology on the nanofibrils effectiveness of cellulose pulps. Cellulose 20:2863–2875. https://doi.org/10.1007/s10570-013-0036-y
de Barros RDO, Paredes RD, Endo T, Bon EPD, Lee SH (2013) Association of wet disk milling and ozonolysis as pretreatment for enzymatic saccharification of sugarcane bagasse and straw. Bioresour Technol 136:288–294. https://doi.org/10.1016/j.biortech.2013.03.009
Delgado-Aguilar M, Gonzalez I, Tarres Q, Pelach MA, Alcala M, Mutje P (2016) The key role of lignin in the production of low-cost lignocellulosic nanofibres for papermaking applications. Ind Crop Prod 86:295–300. https://doi.org/10.1016/j.indcrop.2016.04.010
Dizhbite T, Telysheva G, Jurkjane V, Viesturs U (2004) Characterization of the radical scavenging activity of lignins—natural antioxidants. Bioresour Technol 95:309–317. https://doi.org/10.1016/j.biortech.2004.02.024
Eichhorn SJ et al (2010) Review: current international research into cellulose nanofibres and nanocomposites. J Mater Sci 45:1–33. https://doi.org/10.1007/s10853-009-3874-0
Ferrer A, Filpponen I, Rodriguez A, Laine J, Rojas OJ (2012a) Valorization of residual empty palm fruit bunch fibers (EPFBF) by microfluidization: Production of nanofibrillated cellulose and EPFBF nanopaper. Bioresour Technol 125:249–255. https://doi.org/10.1016/j.biortech.2012.08.108
Ferrer A et al (2012b) Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers. Cellulose 19:2179–2193. https://doi.org/10.1007/s10570-012-9788-z
Garcia A, Gandini A, Labidi J, Belgacem N, Bras J (2016) Industrial and crop wastes: a new source for nanocellulose biorefinery. Ind Crop Prod 93:26–38. https://doi.org/10.1016/j.indcrop.2016.06.004
Gregorova A, Košíková B, Staško A (2007) Radical scavenging capacity of lignin and its effect on processing stabilization of virgin and recycled polypropylene. J Appl Polym Sci 106:1626–1631. https://doi.org/10.1002/app.26687
Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500. https://doi.org/10.1021/cr900339w
Hoeger IC, Nair SS, Ragauskas AJ, Deng YL, Rojas OJ, Zhu JY (2013) Mechanical deconstruction of lignocellulose cell walls and their enzymatic saccharification. Cellulose 20:807–818. https://doi.org/10.1007/s10570-013-9867-9
Hu CS, Zhao Y, Li KC, Zhu JY, Gleisner R (2015) Optimizing cellulose fibrillation for the production of cellulose nanofibrils by a disk grinder. Holzforschung 69:993–1000. https://doi.org/10.1515/hf-2014-0219
Hubbe MA, Rojas OJ, Lucia LA (2015) Green modification of surface characteristics of cellulosic materials at the molecular or nano scale: a review. BioResources 10:6095–6206
Iwamoto S, Abe K, Yano H (2008) The effect of hemicelluloses on wood pulp nanofibrils and nanofiber network characteristics. Biomacromol 9:1022–1026. https://doi.org/10.1021/bm701157n
Jang JH, Lee SH, Endo T, Kim NH (2013) Characteristics of microfibrillated cellulosic fibers and paper sheets from Korean white pine. Wood Sci Technol 47:925–937. https://doi.org/10.1007/s00226-013-0543-x
Jin Z, Katsumata KS, Lam TBT, Iiyama K (2006) Covalent linkages between cellulose and lignin in cell walls of coniferous and nonconiferous woods. Biopolymers 83:103–110. https://doi.org/10.1002/bip.20533
Jonoobi M, Harun J, Shakeri A, Misra M, Oksman K (2009) Chemical composition, crystallinity, and thermal degradation of bleached and unbleached kenaf bast (hibiscus cannabinus) pulp and nanofibers. BioResources 4:626–639
Koshijima T, Watanabe T (2003) Wood ScienceAssociation between lignin and carbohydrates in wood and other plant tissues. Wood science. Springer, Berlin
Lam TBT, Iiyama K (2000) Characteristics of senescent straw cell walls of dwarf, semidwarf, and normal strains of rice (Oryza sativa) plants. J Wood Sci 46:376–380. https://doi.org/10.1007/bf00776399
Le HQ, Dimic-Misic K, Johansson LS, Maloney T, Sixta H (2018) Effect of lignin on the morphology and rheological properties of nanofibrillated cellulose produced from gamma-valerolactone/water fractionation process. Cellulose 25:179–194. https://doi.org/10.1007/s10570-017-1602-5
Lee SH, Chang FX, Inoue S, Endo T (2010) Increase in enzyme accessibility by generation of nanospace in cell wall supramolecular structure. Bioresour Technol 101:7218–7223. https://doi.org/10.1016/j.biortech.2010.04.069
Li J, Sevastyanova O, Gellerstedt G (2002) The relationship between kappa number and oxidizable structures in bleached kraft pulps. J Pulp Pap Sci 28:262–266
Montanari S, Rountani M, Heux L, Vignon MR (2005) Topochemistry of carboxylated cellulose nanocrystals resulting from TEMPO-mediated oxidation. Macromolecules 38:1665–1671. https://doi.org/10.1021/ma048396c
Nair SS, Yan N (2015) Effect of high residual lignin on the thermal stability of nanofibrils and its enhanced mechanical performance in aqueous environments. Cellulose 22:3137–3150. https://doi.org/10.1007/s10570-015-0737-5
Nair SS, Zhu JY, Deng YL, Ragauskas AJ (2014) Characterization of cellulose nanofibrils by micro grinding. J Nanopart Res. https://doi.org/10.1007/s11051-014-2349-7
Nechyporchuk O, Pignon F, Belgacem MN (2015) Morphological properties of nanofibrillated cellulose produced using wet grinding as an ultimate fibrillation process. J Mater Sci 50:531–541. https://doi.org/10.1007/s10853-014-8609-1
Nechyporchuk O, Belgacem MN, Bras J (2016) Production of cellulose nanofibrils: a review of recent advances. Ind Crop Prod 93:2–25. https://doi.org/10.1016/j.indcrop.2016.02.016
Okahisa Y, Abe K, Nogi M, Nakagaito AN, Nakatani T, Yano H (2011) Effects of delignification in the production of plant-based cellulose nanofibers for optically transparent nanocomposites. Compos Sci Technol 71:1342–1347. https://doi.org/10.1016/j.compscitech.2011.05.006
Osong SH, Norgren S, Engstrand P (2013) An approach to produce nano-ligno-cellulose from mechanical pulp fine materials. Nord Pulp Pap Res J 28:472–479
Paakko M et al (2008) Long and entangled native cellulose I nanofibers allow flexible aerogels and hierarchically porous templates for functionalities. Soft Matter 4:2492–2499. https://doi.org/10.1039/b810371b
Park CW, Han SY, Namgung HW, Seo PN, Lee SY, Lee SH (2017) Preparation and characterization of cellulose nanofibrils with varying chemical compositions. BioResources 12:5031–5044. https://doi.org/10.15376/biores.12.3.5031-5044
Rojo E, Peresin MS, Sampson WW, Hoeger IC, Vartiainen J, Laine J, Rojas OJ (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem 17:1853–1866. https://doi.org/10.1039/c4gc02398f
Sacui IA et al (2014) Comparison of the properties of cellulose nanocrystals and cellulose nanofibrils isolated from bacteria, tunicate, and wood processed using acid, enzymatic, mechanical, and oxidative methods. Acs Appl Mater Inter 6:6127–6138. https://doi.org/10.1021/am500359f
Shao ZL, Li KH (2006) The effect of fiber surface lignin on interfiber bonding. J Wood Chem Technol 26:231–244. https://doi.org/10.1080/02773810601023438
Shimada M, Nakamura Y, Kusama Y, Matsuda O, Tamura N, Kageyama E (1974) Electron spin resonance studies of γ-irradiated cellulose. I. Free radicals in decrystallized cellulose. J Appl Polym Sci 18:3379–3386. https://doi.org/10.1002/app.1974.070181117
Solala I et al (2012) Mechanoradical formation and its effects on birch kraft pulp during the preparation of nanofibrillated cellulose with Masuko refining. Holzforschung 66:477–483. https://doi.org/10.1515/hf.2011.183
Spence KL, Venditti RA, Rojas OJ, Habibi Y, Pawlak JJ (2011) A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods. Cellulose 18:1097–1111. https://doi.org/10.1007/s10570-011-9533-z
Stenstad P, Andresen M, Tanem BS, Stenius P (2008) Chemical surface modifications of microfibrillated cellulose. Cellulose 15:35–45. https://doi.org/10.1007/s10570-007-9143-y
Tripathi A, Ferrer A, Khan SA, Rojas OJ (2017) Morphological and thermochemical changes upon autohydrolysis and microemulsion treatments of coir and empty fruit bunch residual biomass to isolate lignin-rich micro- and nanofibrillar cellulose. Acs Sustain Chem Eng 5:2483–2492. https://doi.org/10.1021/acssuschemeng.6b02838
Wach RA, Mitomo H, Nagasawa N, Yoshii F (2003) Radiation crosslinking of carboxymethylcellulose of various degree of substitution at high concentration in aqueous solutions of natural pH. Radiat Phys Chem 68:771–779. https://doi.org/10.1016/S0969-806X(03)00403-1
Acknowledgments
The authors thank the supports from China Scholarship Council under Grant No. 201706660011 and the Project for Graduate Study Overseas of Guangxi University. The research is sponsored by the Innovation Project of Guangxi Graduate Education (YCBZ2018016), the National Natural Science Foundation of China (21766002), the Scientific Research Foundation of Guangxi University (XTZ140551), and the Foundation of Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control (KF201606 and ZR201603).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jiang, Y., Liu, X., Yang, Q. et al. Effects of residual lignin on mechanical defibrillation process of cellulosic fiber for producing lignocellulose nanofibrils. Cellulose 25, 6479–6494 (2018). https://doi.org/10.1007/s10570-018-2042-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-018-2042-6