Analysis of the mechanism of frictional interaction of parts in sealing units of industrial equipment showed the importance of evaluation of the factors affecting the friction coefficient and leak-tightness while designing these parts.
Similar content being viewed by others
References
V. K. Pogodin, Detachable Joints and Leakproofing of High-Pressure Equipment [in Russian], Edited by A. M. Kuznetsov, OGPU Irkutsk Regional Press No. 1, Irkutsk (2001).
G. S. Gura, “Differential equation of constrained motion with due regard for straining of friction contact,” in: Papers at the Fifth Int. Symp. on Tribophatics [in Russian], Irkutsk, 3–7 Oct. 2005, Vol. 2, IrGUPS, Irkutsk (2005), pp. 230–252.
V. I. Balibanov and S. I. Tishchenko, “Tribophatics as a linking chain between tribology and resistance of materials,” Vestn. FGOU BPO, V. P. Goryachkin Moscow State Agroengineering University, No. 1, 100–102 (2008).
Yu. N. Drozdov, V. G. Pavlov, and V. N. Puchkov, Friction and Wear under Experimental Conditions: A Handbook [in Russian], Mashinostroenie, Moscow (1986).
I. V. Kragel’skii and N. M. Mikhin, Friction Joints of Machines: A Handbook [in Russian], Mashinostroenie, Moscow (1983).
V. K. Pogodin, S. Yu. Trutaev, and V. V. Trutaeva, “Mechanisms of contact interaction of detachable hoop joints,” Sovr. Tekhnol. Syst. Analiz. Model., IrGUPS, Irkutsk, No. 4 (52), 44–48 (2016).
V. K. Pogodin, Detachable Joints. Technology of Use in Equipment at Excessive Pressure [in Russian], Edited by P. M. Ogar, Vol. 1. Design, BrGU Press, Bratsk (2013).
V. K. Pogodin, Shutoff Valves for High Parameters. Research and Design [in Russian], BrGU Press, Bratsk (2016).
V. K. Pogodin, E. G. Borsuk, A. A. Tupitsin, et al., “Study of coefficients of friction in sealing joints of high-pressure equipment,” Probl. Mashinostr. Nadezhn. Mashin, No. 2, 51–56 (2005).
V. K. Pogodin, A. A. Tupitsyn, and I. M. Rudykh, “Statistical studies of friction coefficient of sealing joints,” in: Collec. Paps. 5th Int. Symp. Tribophatics, ISTF 2015, Vol. 3, 3–5 Oct. (2005), pp. 110–112.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 54, Nos. 5–6, pp. 7–11, June, 2018.
Rights and permissions
About this article
Cite this article
Pogodin, V.K., Verkhozin, N.A., Trutaev, S.Y. et al. Taking Account of Friction in Designing Critical Units of High-Pressure Technological Equipment. Chem Petrol Eng 54, 379–385 (2018). https://doi.org/10.1007/s10556-018-0490-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-018-0490-3