Skip to main content

Advertisement

Log in

Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization

  • Published:
Adsorption Aims and scope Submit manuscript

Abstract

Gas separation by adsorption processes such as pressure swing adsorption (PSA) presents an attractive alternative for upgrading biogas to biomethane. A new vacuum pressure swing adsorption (VPSA) cycle is proposed for a unit designed to purify pre-cleaned biogas (40% CO2 and 60% CH4) in industrial conditions (feed flow rate more than 500 Nm3/h and large-volume equipment). The process simulations performed to optimize the VPSA unit consider the kinetic separation of the feed components by using an appropriate carbon molecular sieve (CMS) adsorbent having a high kinetic separation selectivity for CO2 with respect to CH4. The designed VPSA unit is composed of five columns that perform three equalization steps. Minimizing methane losses during the regeneration steps necessitates injecting part of the off-gas rich in CO2 at the bottom of the column during the production step to push the CH4 forward. The produced biomethane meets the specification (97% CH4) of grid injection purity. The developed cycle allows a CH4 recovery of 92% to be obtained with a specific energy consumption of 0.35 kWh/Nm3, thus meeting the initial requirements for industrial exploitation of VPSA technology for biomethane purification from biogas sources.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

Download references

Acknowledgements

The authors are grateful to Air Liquide for financial support.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Francois Puel.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary file1 (PDF 1022 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chouikhi, N., Brandani, F., Pullumbi, P. et al. Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization. Adsorption 26, 1275–1289 (2020). https://doi.org/10.1007/s10450-020-00250-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10450-020-00250-3

Keywords

Navigation