Abstract
Compression resin transfer molding (CRTM) is an effective process for the manufacturing of composite parts with large size and high fiber content, while the existence of open gap, the dynamically changing dimensions of cavity geometry and the deformation of preform during filling process bring great difficulties to the three-dimensional simulation of resin flow in CRTM. In order to develop a convenient and efficient three-dimensional simulation approach for CRTM filling process, a unified mathematical model for resin flow in both open gap and preform is established instead of considering the gap as high permeability preform, then the analysis of the clamping force and stress distribution are presented. In order to avoid direct solving the coupled equations of resin flow and cavity deformation, volume of fluid (VOF) multiphase flow technology and dynamic mesh model are applied to track the resin flow front and update the cavity geometry during filling simulation, respectively. The master–slave element method is used to modify the amount of resin release and ensure the resin mass conservation. The validity of the numerical approach is verified by comparison with analytical and experimental results, three-dimensional simulation examples are also presented.
Similar content being viewed by others
References
Um, M.K., Lee, W.I.: A study on the mold filling process in resin transfer molding. Polym Eng Sci 31, 765–771 (1991)
Yoo, Y.E., Lee, W.I.: Numerical simulation of the resin transfer mold filling process using the boundary element method. Polym Compos 17, 368–374 (1996)
Voller, V.R., Peng, S.: An algorithm for analysis of polymer filling molds. Polym Eng Sci 35, 1758–1765 (1995)
Lam, Y.C., Joshi, S.C., Liu, X.L.: Numerical modeling of mold-filling process in resin-transfer moulding. Compos Sci Technol 60, 845–855 (2000)
Simacek, P., Advani, S.G.: A numerical model to predict fiber tow saturation during liquid composite molding. Compos Sci Technol 63, 1725–1736 (2003)
Tan, H., Pillai, K.M.: Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding I: Isothermal flows. Compos Part A 43, 1–13 (2012)
Tan, H., Pillai, K.M.: Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding II: Non-isothermal flows. Compos Part A 43, 14–28 (2012)
Young, W.B.: A two-layer model for the simulation of the VARTM process with resin distribution layer. Appl Compos Mater 20, 1305–1319 (2013)
Pham, X.T., Trochu, F., Guavin, R.: Simulation of compression resin transfer molding with displacement control. J Reinf Plast Compos 17, 1525–1556 (1998)
Pham, X.T., Trochu, F.: Simulation of compression resin transfer molding process. Polym Compos 20, 436–459 (1999)
Han, K., Ni, J., Toth, J., Lee, L.J., Greene, J.P.: Analysis of an injection/compression liquid composite molding process. Polym Compos 19, 487–496 (1998)
Kang, M.K., Lee, W.I.: Analysis of resin transfer/compression molding process. Polym Compos 20, 293–304 (1999)
Pillai, K.M., Tucker, I.I.I.: C.L., Phelan, Jr. F.R.: numerical simulation of injection/compression liquid composite molding. Part 1. mesh generation. Compos Part A 31, 87–94 (2000)
Pillai, K.M., Tucker, I.I.I.: C.L., Phelan, Jr. F.R.: numerical simulation of injection/compression liquid composite molding. Part 2. preform compression. Compos Part A 32, 207–220 (2001)
Shojaei, A.: Numerical simulation of three- dimensionalflow and analysis of filling process in compression resin transfer moulding. Compos Part A 37, 1434–1450 (2006)
Shojaei, A.: A numerical study of filling process through multilayer preforms in resin injection/compression molding. Compos Part A 66, 1546–1557 (2006)
Merotte, J., Simacek, P., Advani, S.G.: Resin flow analysis with fiber preform deformation in throughthickness direction during compression resin transfer molding. Compos Part A 41, 881–887 (2010)
Merotte, J., Simacek, P., Advani, S.G.: Flow analysis during compression of partially impregnated fiber preform under controlled force. Compos Sci Technol 70, 725–733 (2010)
Simacek, P., Advani, S.G., Iobst, S.A.: Modeling flow in compression resin transfer molding for manufacturing of complex lightweight high- performance automotive parts. J Compos Mater 42, 2523–2545 (2008)
Verleye, B., Croce, R., Griebel, M.: Permeability of textile reinforcements: simulation, influence of shear and validation. Compos Sci Technol 68, 2804–2810 (2008)
Brinkman, H.: On the permeability of media consisting of closely packed porous particles. Appl Sci Res 1, 81–86 (2001)
Kelly, P.A., Umer, R., Bickerton, S.: Viscoelastic response of dry and wet fibrous materials during infusion process. Compos Part A 37, 868–873 (2006)
Kelly, P.A.: A viscoelastic model for the compaction of fibrous materials. J Text Inst 102, 689–699 (2011)
Walbran, W.A., Verleye, B., Bickerton, S., Kelly, P.A.: Prediction and experimental verification of normal stress distributions on mould tools during liquid composite moulding. Compos Part A 43, 138–149 (2012)
Hirt, C.W., Nichols, B.D.: Volum-of-fluid (VOF) method for the dynamics of free boundaries. J Comput Phys 39, 201–225 (1981)
Bickerton, S., Buntain, M.J.: Modeling forces generated within rigid liquid composite molding tools, Part B: Numerical analysis. Compos Part A 38, 1742–1754 (2007)
Pham, X., Trochu, F.: Simulation of compression resin transfer molding to manufacture thin composite shells. Polym Compos 20, 436–459 (1999)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, B., Jin, T., Li, J. et al. Three-Dimensional Numerical Simulation of Mold Filling Process in Compression Resin Transfer Molding. Appl Compos Mater 22, 209–230 (2015). https://doi.org/10.1007/s10443-014-9402-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-014-9402-7