Abstract
Global warming could be slowed down by removing carbon dioxide from the atmosphere, yet classical methods for carbon dioxide capture are fewly adapted to indoor settings with carbon dioxide concentrations of 1000–2000 ppmv. Here we review advanced indoor carbon dioxide capture technology with focus on physical adsorption, chemical adsorption, and materials for carbon capture. Physical adsorption includes thermal swing adsorption, ion exchange, and activated carbon impregnation. Chemical adsorption comprises wet impregnation, chemical grafting, the sol–gel method, electric mixing, the solvothermal method, and phase inversion. We observed that thermal swing adsorption is efficient, requires low energy, and is long-lasting. Wet impregnation fosters the development of high-performance materials with exceptional adsorption capacity through modifications in loading mass fraction and functionalization. Silicon dioxide is the most prevalent support material for wet impregnation, with tetraethylenepentamine and polyethyleneimine loading on silica exhibiting remarkable adsorption capacities, up to 4.05 mmol/g. Coupling of ventilation systems with indoor capture devices is promising for applications. The current research on indoor capture primarily focuses on the enhancement of adsorption capacity, thus often overlooking material stability and adsorption rates. Therefore, mathematical models are needed to optimize cyclic stability.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abbasian M, Najibi H (2022) Investigating the kinetics of CO2 absorption in aqueous sodium serinate/piperazine solutions: an experimental and mathematical modeling. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2022.108845
Afrouz M, Ahmadi-Nouraldinvand F, Amani A et al (2023) Preparation and characterization of magnetic PEG-PEI-PLA-PEI-PEG/Fe3O4-PCL/DNA micelles for gene delivery into MCF-7 cells. J Drug Deliv Sci Technol. https://doi.org/10.1016/j.jddst.2022.104016
Akdag AS, Durán I, Gullu G et al (2022) Performance of TSA and VSA post-combustion CO2 capture processes with a biomass waste-based adsorbent. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2022.108759
Aliev F, Mirzaev O, Kholmurodov T et al (2022) Utilization of carbon dioxide via catalytic hydrogenation processes during steam-based enhanced oil recovery. Processes. https://doi.org/10.3390/pr10112306
Alkadhem AM, Elgzoly MAA, Onaizi SA (2020) Novel amine-functionalized magnesium oxide adsorbents for CO2 capture at ambient conditions. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2020.103968
Alkathiri DSS, Sabri MA, Ibrahim TH (2020) Development of activated carbon fibers for removal of organic contaminants. Int J Environ Sci Technol 17:4841–4852. https://doi.org/10.1007/s13762-020-02808-8
Al-Naddaf Q, Lawson S, A. Rownaghi A, et al (2020) Analysis of dynamic CO2 capture over 13X zeolite monoliths in the presence of SOx. Nox and Humidity Aiche J. https://doi.org/10.1002/aic.16297
An H, Cho KY, Yu S et al (2022) Triple-ligand zeolitic imidazolate frameworks for highly CO2 selective mixed matrix membranes. Chem Eng J. https://doi.org/10.1016/j.cej.2021.133606
Cañada-Barcala A, Larriba M, Maté VIA et al (2023) CO2 methanation enhanced with a cyclic SERP process using a commercial Ni-based catalyst mixed with 3A zeolite as adsorbent. Chem Eng J. https://doi.org/10.1016/j.cej.2023.141897
Cao SJ, Zhu DH, Yang YB (2016) Associated relationship between ventilation rates and indoor air quality. RSC Adv 6:111427–111435. https://doi.org/10.1039/c6ra22902f
Chae YS, Park S, Kang DW et al (2022) Moisture-tolerant diamine-appended metal–organic framework composites for effective indoor CO2 capture through facile spray coating. Chem Eng J. https://doi.org/10.1016/j.cej.2021.133856
Chen C, Ahn WS (2011) CO2 capture using mesoporous alumina prepared by a sol–gel process. Chem Eng J 166:646–651. https://doi.org/10.1016/j.cej.2010.11.038
Cheung O, Hedin N (2014) Zeolites and related sorbents with narrow pores for CO2 separation from flue gas. RSC Adv 4:14480–14494. https://doi.org/10.1039/c3ra48052f
Cho Y, Lee JY, Bokare AD et al (2015) LiOH-embedded zeolite for carbon dioxide capture under ambient conditions. J Ind Eng Chem 22:350–356. https://doi.org/10.1016/j.jiec.2014.07.030
Choe JH, Kang DW, Kang M et al (2019) Revealing an unusual temperature-dependent CO2 adsorption trend and selective CO2 uptake over water vapors in a polyamine-appended metal–organic framework. Mater Chem Front 3:2759–2767. https://doi.org/10.1039/c9qm00581a
Choe JH, Kim H, Hong CS (2021) MOF-74 type variants for CO2 capture. Mater Chem Front 5:5172–5185. https://doi.org/10.1039/d1qm00205h
Choi W, Min K, Kim C et al (2016) Epoxide-functionalization of polyethyleneimine for synthesis of stable carbon dioxide adsorbent in temperature swing adsorption. Nat Commun 7:12640. https://doi.org/10.1038/ncomms12640
Chong KC, Lau WJ, Lai SO et al (2019) Preparation and characterization of chromium metal organic framework for carbon dioxide adsorption. IOP Conf Series Earth and Environ Sci. https://doi.org/10.1088/1755-1315/268/1/012010
Costa-Serra JF, Cerdá-Moreno C, Chica A (2020) Zeolite-supported Ni catalysts for CO2 methanation: effect of zeolite structure and Si/Al ratio. Appl Sci. https://doi.org/10.3390/app10155131
Ding ML, Flaig RW, Jiang HL et al (2019) Carbon capture and conversion using metal-organic frameworks and MOF-based materials. Chem Soc Rev 48:2783–2828. https://doi.org/10.1039/c8cs00829a
Fayaz M, Sayari A (2017) Long-term effect of steam exposure on CO2 capture performance of amine-grafted silica. ACS Appl Mater Interfaces 9:43747–43754. https://doi.org/10.1021/acsami.7b15463
Furukawa H, Ko N, Go YB et al (2010) Ultrahigh porosity in metal-organic frameworks. Science 329:424–428. https://doi.org/10.1126/science.1192160
Gaikwad S, Kim Y, Gaikwad R (2021) Enhanced CO2 capture capacity of amine-functionalized MOF-177 metal organic framework. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2021.105523
Goeppert A, Zhang H, Sen R (2019) Oxidation-resistant, cost-effective epoxide-modified polyamine adsorbents for CO2 capture from various sources including air. Chemsuschem 12:1712–1723. https://doi.org/10.1002/cssc.201802978
Grant Glover TG, Peterson GW, Schindler BJ (2011) MOF-74 building unit has a direct impact on toxic gas adsorption. Chem Eng Sci 66:163–170. https://doi.org/10.1016/j.ces.2010.10.002
Gutierrez-Ortega A, Nomen R, Sempere J et al (2022) A fast methodology to rank adsorbents for CO2 capture with temperature swing adsorption. Chem Eng J. https://doi.org/10.1016/j.cej.2022.134703
Hosseini S, Bayesti I, Marahel E et al (2015) Adsorption of carbon dioxide using activated carbon impregnated with Cu promoted by zinc. J Taiwan Inst Chem Eng 52:109–117. https://doi.org/10.1016/j.jtice.2015.02.015
Hu SC, Shiue A, Chang SM et al (2016) Removal of carbon dioxide in the indoor environment with sorption-type air filters. Int J Low-Carbon Tec 12:330–334. https://doi.org/10.1093/ijlct/ctw014
Jacobs JH, Deering CE, Sui RH et al (2023) The role of carbon dioxide and water in the degradation of zeolite 4A, zeolite 13X and silica gels. New J Chem 47:5249–5261. https://doi.org/10.1039/d3nj00093a
Jeong D, Jie W, Adelodun AA et al (2019) Electrospun melamine-blended activated carbon nanofibers for enhanced control of indoor CO2. J Appl Polym Sci. https://doi.org/10.1002/app.47747
Jribi S, Miyazaki T, Saha BB et al (2017) Equilibrium and kinetics of CO2 adsorption onto activated carbon. Int Int J Heat Mass Tran 108:1941–1946. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.114
Jung WH, Lee JW, Lee JS (2023) New facile process evaluation for membrane-based CO2 capture: apparent selectivity model. Chem Eng J. https://doi.org/10.1016/j.cej.2023.141624
Kang JL, Wong DSH, Jang SS et al (2016) A comparison between packed beds and rotating packed beds for CO2 capture using monoethanolamine and dilute aqueous ammonia solutions. Int J Greenh Gas Con 46:228–239. https://doi.org/10.1016/j.ijggc.2016.01.017
Kang DW, Ju SE, Kim DW et al (2020a) Emerging porous materials and their composites for NH3 gas removal. Adv Sci. https://doi.org/10.1002/advs.202002142
Kang DW, Kang M, Hong CS et al (2020b) Post-synthetic modification of porous materials: superprotonic conductivities and membrane applications in fuel cells. J Mater Chem A 8:7474–7494. https://doi.org/10.1039/d0ta01733g
Kim MK, Baldini L, Leibundgut H et al (2015) A novel ventilation strategy with CO2 capture device and energy saving in buildings. Energy Build 87:134–141. https://doi.org/10.1016/j.enbuild.2014.11.017
Kim C, Cho HS, Chang S et al (2016) An ethylenediamine-grafted Y zeolite: a highly regenerable carbon dioxide adsorbent via temperature swing adsorption without urea formation. Energ Environ Sci 9:1803–1811. https://doi.org/10.1039/c6ee00601a
Kim MK, Baldini L, Leibundgut H et al (2020) Evaluation of the humidity performance of a carbon dioxide CO2 capture device as a novel ventilation strategy in buildings. Appl Energ. https://doi.org/10.1016/j.apenergy.2019.03.074
Kim SM, Kim KM, Choi BK et al (2022) CO2 absorption mechanism in aqueous ternary solutions of alkanolamines: experimental and thermodynamic modeling approaches. Chem Eng J. https://doi.org/10.1016/j.cej.2021.132044
Kishor R, Ghoshal AK (2017) Amine-modified mesoporous silica for CO2 adsorption: the role of structural parameters. Ind Eng Chem Res 56:6078–6087. https://doi.org/10.1021/acs.iecr.7b00890
Ko YG, Lee HJ, Kim JY et al (2014) Hierarchically porous aminosilica monolith as a CO2 adsorbent. ACS Appl Mater Interfaces 6:12988–12996. https://doi.org/10.1021/am5029022
Konduru N, Lindner P, Assaf-Anad NM (2007) Curbing the greenhouse effect by carbon dioxide adsorption with Zeolite 13X. Aiche J 53:3137–3143. https://doi.org/10.1002/aic.11318
Kong Y, Shen XD, Cui S et al (2015) Development of monolithic adsorbent via polymeric sol–gel process for low-concentration CO2 capture. Appl Energ 147:308–317. https://doi.org/10.1016/j.apenergy.2015.03.011
Kong Y, Jiang G, Wu Y, Cui S, Shen X (2016) Amine hybrid aerogel for high-efficiency CO2 capture: effect of amine loading and CO2 concentration. Chem Eng J 306:362–368
Kotol M, Rode C, Clausen G et al (2014) Indoor environment in bedrooms in 79 Greenlandic households. Build Environ 81:29–36. https://doi.org/10.1016/j.buildenv.2014.05.016
Krishnamurthy A, Thakkar H, Rownaghi AA et al (2018) Adsorptive removal of formaldehyde from air using mixed-metal oxides. Ind Eng Chem Res 57:12916–12925. https://doi.org/10.1021/acs.iecr.8b02962
Krishnamurthy A, Salunkhe B, Zore A et al (2019) Amine-based latex coatings for indoor air CO2 control in commercial buildings. ACS Appl Mater Interfaces 11:16594–16604. https://doi.org/10.1021/acsami.9b02934
Krishnamurthy S, Lind A, Bouzga A et al (2021) Post combustion carbon capture with supported amine sorbents: From adsorbent characterization to process simulation and optimization. Chem Eng J. https://doi.org/10.1016/j.cej.2020.127121
Lassagne O, Gosselin L, Désilets M et al (2013) Techno-economic study of CO2 capture for aluminum primary production for different electrolytic cell ventilation rates. Chem Eng J 230:338–350. https://doi.org/10.1016/j.cej.2013.06.038
Lee JS, Kim JH, Kim JT et al (2002) Adsorption equilibria of CO2 on Zeolite 13X and Zeolite X/Activated carbon composite. J Chem Eng Data 47:1237–1242. https://doi.org/10.1021/je020050e
Lee KM, Lim YH, Jo YM (2012) Evaluation of moisture effect on low-level CO2 adsorption by ion-exchanged zeolite. Environ Technol 33:77–84. https://doi.org/10.1080/09593330.2011.551837
Lee SC, Hsieh CC, Chen CH et al (2013) CO2 adsorption by Y-type zeolite impregnated with amines in indoor air. Aerosol Air Qual Res 13:360–366. https://doi.org/10.4209/aaqr.2012.05.0134
Lee TS, Cho JH, Chi SH (2015) Carbon dioxide removal using carbon monolith as electric swing adsorption to improve indoor air quality. Build Environ 92:209–221. https://doi.org/10.1016/j.buildenv.2015.04.028
Lee M, Kim Y, Lim HS et al (2022) Low temperature CO2 conversion facilitated by the preserved morphology of metal oxide-perovskite composite. Chem Eng J. https://doi.org/10.1016/j.cej.2022.135151
Li XQ, Yao DD, Wang DC et al (2022) Amino-functionalized ZIFs-based porous liquids with low viscosity for efficient low-pressure CO2 capture and CO2/N2 separation. Chem Eng J. https://doi.org/10.1016/j.cej.2021.132296
Li JH, Wang YF, Hu MR et al (2023) Self-templated synthesis of boron-doped porous carbon by chemical interaction of 2LiBH4·CO2 with CO2. Chem Eng J. https://doi.org/10.1016/j.cej.2022.140205
Lin JH, Lu W, Shi XY et al (2021) Design of an intelligent nanofiber-based solid amine adsorbent with high CO2 capture capacity and an ultralow regeneration temperature. ACS Sustain Chem Eng 9:10184–10195. https://doi.org/10.1021/acssuschemeng.1c02387
Lin L, Meng Y, Ju TY et al (2023) Characteristics, application and modeling of solid amine adsorbents for CO2 capture: a review. J Environ Manage 325:116438. https://doi.org/10.1016/j.jenvman.2022.116438
Liu YN, Chen CS, Valdez J et al (2021) Phase-enabled metal-organic framework homojunction for highly selective CO2 photoreduction. Nat Commun. https://doi.org/10.1038/s41467-021-21401-2
Lustig WP, Mukherjee S, Rudd ND et al (2017) Metal-organic frameworks: functional luminescent and photonic materials for sensing applications. Chem Soc Rev 46:3242–3285. https://doi.org/10.1039/c6cs00930a
Mahajan S, Lahtinen M (2022) Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures. J Environ Chem Eng. https://doi.org/10.1016/j.cej.2020.125617
Mao VY, Milner PJ, Lee JH et al (2020) Cooperative carbon dioxide adsorption in alcoholamine- and alkoxyalkylamine-functionalized metal-organic frameworks. Angew Chem Int Ed Engl 59:19468–19477. https://doi.org/10.1002/anie.201915561
Mason JA, McDonald TM, Bae TH et al (2015) Application of a high-throughput analyzer in evaluating solid adsorbents for post-combustion carbon capture via multicomponent adsorption of CO2, N2, and H2O. J Am Chem Soc 137:4787–4803. https://doi.org/10.1021/jacs.5b00838
McDonald TM, Lee WR, Mason JA et al (2012) Capture of carbon dioxide from air and flue gas in the alkylamine-appended metal-organic framework mmen-Mg2(dobpdc). J Am Chem Soc 134:7056–7065. https://doi.org/10.1021/ja300034j
Meng X, Wang HN, Song SY et al (2017) Proton-conducting crystalline porous materials. Chem Soc Rev 46:464–480. https://doi.org/10.1039/c6cs00528d
Min K, Choi W, Choi M (2017) Macroporous silica with thick framework for steam-stable and high-performance poly(ethyleneimine)/silica CO2 adsorbent. Chemsuschem 10:2518–2526. https://doi.org/10.1002/cssc.201700398
Min K, Choi W, Kim C (2018) Oxidation-stable amine-containing adsorbents for carbon dioxide capture. Nat Commun 9:726. https://doi.org/10.1038/s41467-018-03123-0
Olajire AA (2010) CO2 capture and separation technologies for end-of-pipe applications – a review. Energy 35:2610–2628. https://doi.org/10.1016/j.energy.2010.02.030
Otgonbayar Z, Areerob Y, Oh WC (2022) Comparative catalytic approach of Ag doped ZnO with various nanocarbon materials toward CO2 reduction with magnetic field and carbon form dependence. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2022.108838
Pacheco M, Bordonhos M, Sardo M et al (2022) Moisture effect on the separation of CO2/CH4 mixtures with amine-functionalised porous silicas. Chem Eng J. https://doi.org/10.1016/j.cej.2022.136271
Park J, Chae YS, Kang DW et al (2021) Shaping of a metal-organic framework-polymer composite and Its CO2 adsorption performances from humid indoor air. ACS Appl Mater Interfaces 13:25421–25427. https://doi.org/10.1021/acsami.1c06089
Parvazinia M, Garcia S, Maroto-Valer M (2018) CO2 capture by ion exchange resins as amine functionalised adsorbents. Chem Eng J 331:335–342. https://doi.org/10.1016/j.cej.2017.08.087
Qi GG, Fu LL, Giannelis EP (2014) Sponges with covalently tethered amines for high-efficiency carbon capture. Nat Commun. https://doi.org/10.1038/ncomms6796
Rajan PE, Krishnamurthy A, Morrison G et al (2017) Advanced buffer materials for indoor air CO2 control in commercial buildings. Indoor Air 27:1213–1223. https://doi.org/10.1111/ina.12386
Rehman AU, Baek JW, Rene ER et al (2018) Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal. Process Saf Environ 118:384–396. https://doi.org/10.1016/j.psep.2018.07.004
Roh E, Subiyanto I, Choi W et al (2021) CO2 / N2 and O2 / N2 separation using mixed-matrix membranes with MOF-74 nanocrystals synthesized via microwave reactions. B Korean Chem Soc 42:459–462. https://doi.org/10.1002/bkcs.12217
Salari M, Tabatabaei FS, Fouladi-Fard R et al (2022) Influence of heating systems on indoor air quality and sick building syndrome (a case study in Qom, Iran). Int J Vent, 85: https://doi.org/10.1080/14733315.2022.2068250
Sanz-Perez ES, Murdock CR, Didas SA et al (2016) Direct capture of CO2 from ambient air. Chem Rev 116:11840–11876. https://doi.org/10.1021/acs.chemrev.6b00173
Sarkhosh M, Najafpoor AA, Alidadi H et al (2021) indoor air quality associations with sick building syndrome: an application of decision tree technology. Build Environ. https://doi.org/10.1016/j.buildenv.2020.107446
Satish U, Mendell MJ, Shekhar K et al (2012) Is CO2 an indoor pollutant? Direct effects of low-to-moderate CO2 concentrations on human decision-making performance. Environ Health Perspect 120:1671–1677. https://doi.org/10.1289/ehp.1104789
Satyapal S, Filburn T, Trela J et al (2001) Performance and Properties of a Solid Amine Sorbent for Carbon Dioxide Removal in Space Life Support Applications. Energy Fuels 15:250–255. https://doi.org/10.1021/ef0002391
Sayari A, Belmabkhout Y, Da’na E (2012) CO2 deactivation of supported amines: does the nature of amine matter? Langmuir 28:4241–4247. https://doi.org/10.1021/la204667v
Shen YT, Yang HX (2023) Global performance analysis of a solar-driven indoor CO2/H2O capture system for air quality enhancement and cooling energy saving. Energ Convers Manage. https://doi.org/10.1016/j.enconman.2023.116831
Shen XH, Du HB, Mullins RH (2017) Polyethylenimine applications in carbon dioxide capture and separation: from theoretical study to experimental work. Energ Technol 5:822–833. https://doi.org/10.1002/ente.201600694
Shi YS, Xie Y, Cui H et al (2022) An ultramicroporous metal–organic framework with dual functionalities for high sieving separation of CO2 from CH4 and N2. Chem Eng J. https://doi.org/10.1016/j.cej.2022.137101
Siegelman RL, Milner PJ, Forse AC et al (2019) Water enables efficient CO2 capture from natural gas flue emissions in an oxidation-resistant diamine-appended metal-organic framework. J Am Chem Soc 141:13171–13186. https://doi.org/10.1021/jacs.9b05567
Sim TJ, Pacia RM, Ko YS (2020) Preparation of CO2 adsorbent with N-1-(3-(trimethoxysilyl)propyl)-1,3-propanediamine and its performance. Korean J Chem Eng 37:1515–1521. https://doi.org/10.1007/s11814-020-0565-7
Smykowski D, Szyja B, Szczygiel J (2013) DFT modeling of CO2 adsorption on Cu, Zn, Ni, Pd/DOH zeolite. J Mol Graph Model 41:89–96. https://doi.org/10.1016/j.jmgm.2013.01.009
Suleman H, Maulud AS, Fosbøl PL et al (2021) A review of semi-empirical equilibrium models for CO2-alkanolamine-H2O solutions and their mixtures at high pressure. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2020.104713
Tabarkhoon F, Abolghasemi H, Rashidi A et al (2023) Synthesis of novel and tunable micro-mesoporous carbon nitrides for ultra-high CO2 and H2S capture. Chem Eng J. https://doi.org/10.1016/j.cej.2022.140973
Thakkar H, Eastman S, Al-Mamoori A et al (2017) Formulation of aminosilica adsorbents into 3D-printed monoliths and evaluation of their CO2 capture performance. ACS Appl Mater Interfaces 9:7489–7498. https://doi.org/10.1021/acsami.6b16732
Theofanidis SA, Antzaras AN, Lemonidou AA (2023) CO2 as a building block: from capture to utilization. Curr Opin Chem Eng. https://doi.org/10.1016/j.coche.2023.100902
Tomas K, Karel F (2017) An adsorption of carbon dioxide on activated carbon controlled by temperature swing adsorption. In: AIP conference proceedings 020023: https://doi.org/10.1063/1.5004357
Walton KS, Abney MB, Douglas LeVan M et al (2006) CO2 adsorption in Y and X zeolites modified by alkali metal cation exchange. Micropor Mesopor Mat 91:78–84. https://doi.org/10.1016/j.micromeso.2005.11.023
Wang XX, Ma XL, Schwartz V et al (2012) A solid molecular basket sorbent for CO2 capture from gas streams with low CO2 concentration under ambient conditions. Phys Chem Chem Phys 14:1485–1492. https://doi.org/10.1039/c1cp23366a
Wang Z, Dai Z, Wu JJ et al (2013) Vacuum-dried robust bridged silsesquioxane aerogels. Adv Mater 25:4494–4497. https://doi.org/10.1002/adma.201301617
Wang JT, Wang M, Li WC et al (2015) Application of polyethylenimine-impregnated solid adsorbents for direct capture of low-concentration CO2. Aiche J 61:972–980. https://doi.org/10.1002/aic.14679
Wang J, Adelodun AA, Oh JM (2020a) TEPA impregnation of electrospun carbon nanofibers for enhanced low-level CO2 adsorption. Nano Converg. https://doi.org/10.1186/s40580-020-0217-y
Wang WJ, Liu FL, Zhang QX et al (2020b) Efficient removal of CO2 from indoor air using a polyethyleneimine-impregnated resin and its low-temperature regeneration. Chem Eng J. https://doi.org/10.1016/j.cej.2020.125734
Wang YX, Hu XD, Guo T et al (2021) The competitive adsorption mechanism of CO2, H2O and O2 on a solid amine adsorbent. Chem Eng J. https://doi.org/10.1016/j.cej.2021.129007
Wei YZ, Salih KAM, Rabie K et al (2021) Development of phosphoryl-functionalized algal-PEI beads for the sorption of Nd(III) and Mo(VI) from aqueous solutions – Application for rare earth recovery from acid leachates. Chem Eng J. https://doi.org/10.1016/j.cej.2020.127399
Wu YH, Yao R, Zhang XY et al (2021) Preparation and characterization of ACF/carbon composite membranes for efficient oil/water separation. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2021.105164
Wurzbacher JA, Gebald C, Steinfeld A et al (2011) Separation of CO2 from air by temperature-vacuum swing adsorption using diamine-functionalized silica gel. Energ Environ Sci. https://doi.org/10.1039/c1ee01681d
Yang ST, Kim J, Ahn WS (2010) CO2 adsorption over ion-exchanged zeolite beta with alkali and alkaline earth metal ions. Micropor Mesopor Mat 135:90–94. https://doi.org/10.1016/j.micromeso.2010.06.015
Yang CR, Xiong YX, Chen JA et al (2021) Amine-functionalized micron-porous polymer foams with high CO2 adsorption efficiency and exceptional stability in PSA process. Chem Eng J. https://doi.org/10.1016/j.cej.2021.129555
Yoon B, Calabro DC, Baugh LS et al (2022) Probing strong steric hindrance effects in aqueous alkanolamines for CO2 capture from first principles. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2022.108987
Younas M, Rezakazemi M, Daud M et al (2020) Recent progress and remaining challenges in post-combustion CO2 capture using metal-organic frameworks (MOFs). Prog Energ Combust. https://doi.org/10.1016/j.pecs.2020.100849
Yu JM, Xie LH, Li JR et al (2017) CO2 capture and separations using MOFs: computational and experimental studies. Chem Rev 117:9674–9754. https://doi.org/10.1021/acs.chemrev.6b00626
Zhao YY, Zhou JZ, Fan LL et al (2019) Indoor CO2 control through mesoporous amine-functionalized silica monoliths. Ind Eng Chem Res 58:19465–19474. https://doi.org/10.1021/acs.iecr.9b03338
Zukal A, Pawlesa J, Čejka J (2009) Isosteric heats of adsorption of carbon dioxide on zeolite MCM-22 modified by alkali metal cations. Adsorption 15:264–270. https://doi.org/10.1007/s10450-009-9178-5
Zukal A, Pulido A, Gil B et al (2010) Experimental and theoretical determination of adsorption heats of CO2 over alkali metal exchanged ferrierites with different Si/Al ratio. Phys Chem Chem Phys 12:6413–6422. https://doi.org/10.1039/c001950j
Acknowledgements
This work was supported by the Opening Funds of State Key Laboratory of Building Safety and Built Environment (BSBE2022-EET-02).
Funding
This work was supported by the Opening Funds of State Key Laboratory of Building Safety and Built Environment (BSBE2022-EET-02).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yuan, J., Song, X., Yang, X. et al. Indoor carbon dioxide capture technologies: a review. Environ Chem Lett 21, 2559–2581 (2023). https://doi.org/10.1007/s10311-023-01620-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10311-023-01620-3