Abstract
A novel method for preparing conductive polyethylene (PE) composites has been developed. In the method, the powder of low melting point metal alloy (LMPA) is filled into the PE matrix by using twin screw extruder at a temperature below the melting point of the LMPA, and followed by a die drawing process at a temperature around the melting point of the metal alloy. It has been found that die drawing process, repeating the die drawing process and adding nano-fillers, such as montmorillonite (MMT) and multi-wall carbon nanotubes (MWCNTs), all help reduce the metal particle size in the PE matrix, thus improve the conductivity of the composite. The conductivity improvement is attributed to an increased number of the smaller metal particles. Therefore, conductive composites of polymer/metal alloy/nano-filler with high conductivity are possible to be prepared by using the new method.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kim, D.H., Xiao, J., Song J., Huang, Y. and Rogers, J.A., Adv. Mater., 2010, 22(19): 2108
Chen, Z., Xu, C., Ma, C., Ren, W. and Cheng, H.M., Adv. Mater., 2013, 25(9): 1296
Bigg, D.M. and Stutz, D.E., Polym. Compos., 1983, 4(1): 40
Cédric, C., Vladan, K., Maryline, L. and Claude, D., Sensors, 2007, 7(4): 473
Flandin, L., Brechet, Y. and Cavaille, J.Y., Compos. Sci. Technol., 2001, 61(6): 895
Kim, B., Koncar, V. and Dufour, C., J. Appl. Polym. Sci., 2006, 101(3): 1252
Zhang, W., Dehghani-Sanij, A. and Blackburn, R., J. Mater. Sci., 2007, 42(10): 3408
Michelle, R.S., Caitlin, E.M., Rosario, A.G., Eric, A.M. and Meisha, L.S., Polymer, 2012, 53(4): 1020
Franz, F., Vladimir, Z., Thomas, S. and Mady, E., Adv. Eng. Mater., 2010, 12(12): 1177
Lee, J.Y., Connor, S. T., Cui, Y. and Peumans, P., Nano Lett., 2008, 8(2): 689
Byrne, M.T. and Gun’ko, Y.K., Adv. Mater., 2010, 22(15): 1672
Zhang, X., Pan, Y., Cheng, J. and Yi, X., J. Mater. Sci., 2000, 35(18): 4573
Yi, X.S., Zhang, X.W., Shen, L. and Pan, Y., Polym. Plast. Technol. Eng., 2000, 39(5): 829
Wu, T., Pan, Y. and Li, L., J. Appl. Polym. Sci., 2011, 121(5): 2969
Mrozek, R.A., Cole, P.J. and Mondy, L.A., Polymer, 2010, 51(14): 2954
Zhu, Y.L., Zhang, X.H., Guo, M.F., Huang, W.Q., Yang, J., Liang, Z.W. and Qiao, J.L., Chinese J. Polym. Sci., 2013, 31(8): 1061
Chen, G., Zhang, X.H. and Qiao, J.L., Sci. China Chem., 2014, doi: 10.1007/s11426-014-5131-x
Coates, P.D, Caton-Rose, P., Ward, I.M. and Thompson, G., Sci. China Chem., 2013, 56(8): 1017
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, G., Zhang, Xh. & Qiao, Jl. Effect of nano-fillers on conductivity of polyethylene/low melting point metal alloy composites. Chin J Polym Sci 33, 371–375 (2015). https://doi.org/10.1007/s10118-015-1589-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-015-1589-z