Abstract
The building industry has regularly been criticized for resource exploitation, energy use, waste production, greenhouse gas emissions, and impacts on the landscape. The growing population demands more built environment to accommodate the socioeconomic wellbeing. Adopting conventional construction practices would continue the aforementioned issues. Therefore, it is important to integrate life cycle thinking into building construction to minimize its social, environmental, and economic impacts. The objective of this study is to assess the life cycle impact of commonly used wall–roof systems for low rise commercial building construction in Canada. A framework is developed to assess different building alternatives using the triple bottom line of sustainability. Identified environmental and socioeconomic impact indicators are eventually aggregated to develop a life cycle impact index. Material quantities of six wall–roof combinations for a single-storey commercial building were obtained from industrial partners. State-of-the-art life cycle assessment software is used to assess the life cycle impacts of different wall–roof systems. To accommodate decision makers’ preferences of sustainability, wall–roof combinations are assessed for three potential scenarios namely, eco-centric, neutral, and economy-centric using multi-criteria decision analysis. The framework has also been implemented on a case study of low rise building in Calgary (Alberta, Canada) to evaluate its practicality. The study results revealed that the concrete–steel building is the most sustainable alternative in neutral and economy-centric scenario while steel–wood building is the most sustainable building in eco-centric scenario.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10098-016-1168-1/MediaObjects/10098_2016_1168_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10098-016-1168-1/MediaObjects/10098_2016_1168_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10098-016-1168-1/MediaObjects/10098_2016_1168_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10098-016-1168-1/MediaObjects/10098_2016_1168_Fig4_HTML.gif)
Similar content being viewed by others
Notes
Carbon dioxide equivalents.
From 79 Mt CO2e in 2010.
RSMeans provides updated building construction cost data for estimation.
References
Adetunji I, Price A, Fleming P, Kemp P (2003) Sustainability and the UK construction industry: a review. Proc ICE Eng Sustain 156:15. doi:10.1680/ensu.2003.156.4.185
Ajayi SO, Oyedele LO, Ceranic B et al (2015) Life cycle environmental performance of material specification: a BIM-enhanced comparative assessment. Int J Sustain Build Technol Urban Dev 6:14–24. doi:10.1080/2093761X.2015.1006708
Akadiri PO, Olomolaiye PO (2012) Development of sustainable assessment criteria for building materials selection. Eng Constr Archit Manag 19:666–687. doi:10.1108/09699981211277568
Anderson J, Shiers D, Steele K (2009) The green guide to specification: an environmental profiling system for building materials and components. Wiley, Ames
Asokan P, Osmani M, Price ADF (2009) Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites. J Clean Prod 17:821–829. doi:10.1016/j.jclepro.2008.12.004
Assaf SA, Al-Hammad A, Jannadi OA, Saad SA (2002) Assessment of the problems of application of life cycle costing in construction projects. Cost Eng 44:17–22
Athena Sustainable Materials Institute (2016) IE for buildings. Athena Sustainable Materials Institute, Ottawa
Bank LC, Thompson BP, McCarthy M (2011) Decision-making tools for evaluating the impact of materials selection on the carbon footprint of buildings. Carbon Manag 2:431–441. doi:10.4155/cmt.11.33
Boyd DR (2001) Canada vs. the OECD: an environmental comparison. University of Victoria, Victoria
Bull JW (1993) Life cycle costing for construction. Spon press, London
Cabeza LF, Rincón L, Vilariño V et al (2014) Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: a review. Renew Sustain Energy Rev 29:394–416. doi:10.1016/j.rser.2013.08.037
Carter K, Fortune C (2007) Sustainable development policy perceptions and practice in the UK social housing sector. Constr Manag Econ 25:399–408. doi:10.1080/01446190600922578
CCME (2014) State of waste management in Canada. Canadian Council of Ministers of Environment (CCME), Kanata
Chen Y, Okudan GE, Riley DR (2010) Sustainable performance criteria for construction method selection in concrete buildings. Autom Constr 19:235–244. doi:10.1016/j.autcon.2009.10.004
City of Calgary (2015) Landfill rates
Crawford R (2011) Life cycle assessment in the built environment. Taylor & Francis, New York
David Suzuki Foundation (2010) The maple leaf in the OECD: Canada’s environmental performance. David Suzuki Foundation, Vancouver
Demaid A, Quintas P (2006) Knowledge across cultures in the construction industry: sustainability, innovation and design. Technovation 26:603–610. doi:10.1016/j.technovation.2005.06.003
Environment Canada (2012a) Canada’s emissions trends 2012. Minister of the Environment, Ottawa
Environment Canada (2012b) National Inventory Report: 1990–2010. Ottawa
European Commission (2014) Life-cycle costing
Fard NH (2012) Emergy based-sustainability rating system for buildings: case study for Canada. The University of British Columbia, Vancouver
Frenette CD, Bulle C, Beauregard R et al (2010) Using life cycle assessment to derive an environmental index for light-frame wood wall assemblies. Build Environ 45:2111–2122. doi:10.1016/j.buildenv.2010.03.009
Goedkoop M (2001) The Eco-indicator 99 a damage oriented method for life cycle impact assessment methodology annex
Goedkoop M, Heijungs R, Huijbregts M et al (2012) ReCiPe 2008: a life cycle impact assessment method which comprises harmonised category indicators at the midpoint and the endpoint level, First edit. Ministry of Housing, Spatial Planning and Environment (VROM)
Goggins J, Keane T, Kelly A (2010) The assessment of embodied energy in typical reinforced concrete building structures in Ireland. Energy Build 42:735–744. doi:10.1016/j.enbuild.2009.11.013
Gu L, Lin B, Zhu Y et al (2008) Integrated assessment method for building life cycle environmental and economic performance. Build Simul 1:169–177. doi:10.1007/s12273-008-8414-3
Haider H, Sadiq R, Tesfamariam S (2015) Inter-utility performance benchmarking model for small-to-medium-sized water utilities: aggregated performance indices. J Water Resour Plann Manag. doi:10.1061/(ASCE)WR.1943-5452.0000552,04015039
Hampton D (1994) Procurement issues. J Manag Eng 10:45–49. doi:10.1061/(ASCE)9742-597X(1994)10:6(45)
Hoekstra AY, Chapagain AK, Aldaya MM, Mekonnen MM (2011) The water footprint assessment manual
Hossaini N, Reza B, Akhtar S et al (2015) AHP based life cycle sustainability assessment (LCSA) framework: a case study of six storey wood frame and concrete frame buildings in Vancouver. J Environ Plan Manag 58:1217–1241. doi:10.1080/09640568.2014.920704
Industry Canada (2011) Buildings. In: Corp. Soc. Responsib
ISO 14040 (2006) Environmental management–Life cycle assessment—principles and framework. International Organization for Standardization, Geneva
Jeffrey C (2011) Construction and demolition waste recycling: a literature review. Halifax
Ji C, Hong T (2016) Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment. Environ Impact Assess Rev 57:123–133. doi:10.1016/j.eiar.2015.11.013
Jones P, Comfort D, Hillier D (2006) Corporate social responsibility and the UK construction industry. J Corp Real Estate 8:134–150. doi:10.1108/14630010610711757
Kahhat R, Crittenden J, Sharif F et al (2009) Environmental impacts over the life cycle of residential buildings using different exterior wall systems. J Infrastruct Syst 15:211–221. doi:10.1061/(ASCE)1076-0342(2009)15:3(211)
Kashyap M, Khalfan M, Zainul-Abidin N (2003) A proposal foe achieving sustainability in construction projects through concurrent engineering. The RICS Foundation, London
Kibert CJ (2012) Sustainable construction: green building design and delivery, 3rd edn. Wiley, Hoboken
Kloepffer W (2008) Life cycle sustainability assessment of products. Int J Life Cycle Assess 13:89–95. doi:10.1065/lca2008.02.376
Lindfors L-G (1995) Nordic guidelines on life-cycle assessment. Nordic Council of Ministers, Indiana University, Copenhagen
Liu A, Fellows R (2008) Impact of participants’ values on construction sustainability. Proc ICE Eng Sustain 161:219–227. doi:10.1680/ensu.2008.161.4.219
Medineckiene M, Turskis Z, Zavadskas EK (2010) Sustainable construction taking into account the building impact on the environment. J Environ Eng Landsc Manag 18:118–127. doi:10.3846/jeelm.2010.14
Meil J, Lucuik M, O’Connor J, Dangerfield J (2006) A life cycle environmental and economic assessment of optimum value engineering in houses. For Prod J 56:19–25
Monahan J, Powell JC (2011) An embodied carbon and energy analysis of modern methods of construction in housing: a case study using a lifecycle assessment framework. Energy Build 43:179–188. doi:10.1016/j.enbuild.2010.09.005
National Audit Office (2005) Improving public services through better construction. National Audit Office, London
Natural Resources Canada (2012) Energy efficiency trends in Canada, 1990 to 2009. Natural Resources Canada, Ottawa
Natural Resources Canada (2013) Sustainable development strategy 2007–2009. Natural Resources Canada, Ottawa
Natural Resources Canada (2014) Buildings. Natural Resources Canada, Ottawa
Nisbet M, Venta G, Foo S (2002) Demolition and deconstruction: review of the current status of reuse and recycling of building materials. Pittsburgh
Nyboer J, Kamiya G (2012) Energy use and related data: Canadian Construction Industry 1990 to 2010. Burnaby BC
Osmani M, Glass J, Price ADF (2008) Architects’ perspectives on construction waste reduction by design. Waste Manag 28:1147–1158. doi:10.1016/j.wasman.2007.05.011
Phelan M (2015) Square foot costs 2015 book. RSMeans, Norwell
Pizzol M, Weidema B, Brandão M, Osset P (2015) Monetary valuation in life cycle assessment: a review. J Clean Prod 86:170–179. doi:10.1016/j.jclepro.2014.08.007
Ramesh T, Prakash R, Shukla KK (2010) Life cycle energy analysis of buildings: an overview. Energy Build 42:1592–1600. doi:10.1016/j.enbuild.2010.05.007
Recycling council of Alberta (2012) Recycling Council of Alberta Newsletter: connector. Recycling council of Alberta, Bluffton
Reza B, Sadiq R, Hewage K (2011) Sustainability assessment of flooring systems in the city of Tehran: an AHP-based life cycle analysis. Constr Build Mater 25:2053–2066. doi:10.1016/j.conbuildmat.2010.11.041
Reza B, Sadiq R, Hewage K (2013) Emergy-based life cycle assessment (Em-LCA) for sustainability appraisal of infrastructure systems: a case study on paved roads. Clean Technol Environ Policy. doi:10.1007/s10098-013-0615-5
Rezgui Y, Wilson IE, Li H (2010) Promoting sustainability awareness through energy engaged virtual communities of construction stakeholders. Springer, Heidelberg
Risch E, Loubet P, Núñez M, Roux P (2014) How environmentally significant is water consumption during wastewater treatment? Application of recent developments in LCA to WWT technologies used at 3 contrasted geographical locations. Water Res 57:20–30. doi:10.1016/j.watres.2014.03.023
Ruparathna R (2013) Emergy based procurement framework to improve sustainability performance in construction. University of British Columbia, Vancouver
Ruparathna R, Hewage K (2015) Sustainable procurement in the Canadian construction industry: challenges and benefits. Can J Civ Eng 42:417–426. doi:10.1139/cjce-2014-0376
Scheuer C, Keoleian GA, Reppe P (2003) Life cycle energy and environmental performance of a new university building: modeling challenges and design implications. Energy Build 35:1049–1064. doi:10.1016/S0378-7788(03)00066-5
Scrap Monster (2015) North America scarp metal prices
Sev A (2009) How can the construction industry contribute to sustainable development?A conceptual framework. Sustain Dev 17:161–173. doi:10.1002/sd
Sharma A, Saxena A, Sethi M, Shree V (2011) Life cycle assessment of buildings: a review. Renew Sustain Energy Rev 15:871–875. doi:10.1016/j.rser.2010.09.008
Spence R, Mulligan H (1995) Sustainable development and the construction industry. Habitat Int 19:279–292. doi:10.1016/0197-3975(94)00071-9
Srinivasan RS, Ingwersen W, Trucco C et al (2014) Comparison of energy-based indicators used in life cycle assessment tools for buildings. Build Environ 79:138–151. doi:10.1016/j.buildenv.2014.05.006
Takano A, Hughes M, Winter S (2014) A multidisciplinary approach to sustainable building material selection: a case study in a Finnish context. Build Environ 82:526–535. doi:10.1016/j.buildenv.2014.09.026
Takano A, Pal SK, Kuittinen M et al (2015) The effect of material selection on life cycle energy balance: a case study on a hypothetical building model in Finland. Build Environ 89:192–202. doi:10.1016/j.buildenv.2015.03.001
Thormark C (2006) The effect of material choice on the total energy need and recycling potential of a building. Build Environ 41:1019–1026. doi:10.1016/j.buildenv.2005.04.026
Toronto and Barrie Commercial Building Inspector (2016) Life expectancy of commercial building components. http://www.barrie101.com/life_expectancy.html. Accessed 17 Mar 2016
United Nations Environment Program (UNEP) (2011) Towards a life cycle sustainability assessment: making informed choices on products. United Nations Environment Programme, Nirobi
Van Ooteghem K, Xu L (2012) The life-cycle assessment of a single-storey retail building in Canada. Build Environ 49:212–226. doi:10.1016/j.buildenv.2011.09.028
Windapo A, Ogunsanmi O (2014) Construction sector views of sustainable building materials. Proc Inst Civ Eng Eng Sustain 167:64–75. doi:10.1680/ensu.13.00011
Wong JKW, Li H (2008) Application of the analytic hierarchy process (AHP) in multi-criteria analysis of the selection of intelligent building systems. Build Environ 43:108–125. doi:10.1016/j.buildenv.2006.11.019
Wübbenhorst KL (1986) Life cycle costing for construction projects. Long Range Plann 19:87–97. doi:10.1016/0024-6301
Yale University (2014) Country rankings. Yale University, New Haven
Yoon K, Hwang GI (1995) Multiple attribute decision making: an introduction, Sage University. Sage, Thousand Oaks
Zamagni A, Buttol P, Porta PL et al (2008) Critical review of the current research needs and limitations related to ISOLCA practice. Leiden, Netherlands
Acknowledgments
Authors would like to thank Mr. Phil Long, Senior Project Manager at Maple Reinders Inc. Canada for providing case study data.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
AL-Nassar, F., Ruparathna, R., Chhipi-Shrestha, G. et al. Sustainability assessment framework for low rise commercial buildings: life cycle impact index-based approach. Clean Techn Environ Policy 18, 2579–2590 (2016). https://doi.org/10.1007/s10098-016-1168-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10098-016-1168-1