Skip to main content
Log in

Stability electrochemical performance of self-assembled hierarchical MnCO3/MWCNT nanocomposite as anode material for lithium-ion batteries

  • Original Paper
  • Published:
Journal of Solid State Electrochemistry Aims and scope Submit manuscript

Abstract

The self-assembled hierarchical MnCO3/MWCNT nanoarchitectures are prepared by a facile solvothermal method and used as anode material for lithium-ion batteries. The results of SEM and TEM show that the hierarchical nanorods are made of the primary MnCO3 nanocrystals. The hierarchical nanorods MnCO3 are heterogeneously distributed among retiform MWCNTs. Those MnCO3/MWCNT nanoarchitectures are able to buffer the physical aggregation of the MnCO3 nanorods and volume expansion of MnCO3 in the charge/discharge process. The self-assembled hierarchical MnCO3/MWCNT nanocomposite delivers a reversible capacity of 704 mAh g−1 after 110 cycles at a current density of 100 mA g−1. The excellent electrochemical performance is attributed to the self-assembled hierarchical MnCO3/MWCNT nanoarchitectures and the high conductivity of MWCNTs.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  1. Jin RC, Jiang H, Sun YX (2016) Fabrication of NiFe2O4 /C hollow spheres constructed by mesoporous nanospheres for high performance lithium-ion batteries. Chem Eng J 303:501–510

  2. Yu L, Guan BY, Xiao W (2015) Formation of yolk-shelled Ni–Co mixed oxide nanoprisms with enhanced electrochemical performance for hybrid supercapacitors and lithium ion batteries. Adv Energy Mater 5:1500981

  3. Jin RC, Ma YQ, Sun YX (2017) Manganese cobalt oxide (MnCo2O4) hollow spheres as high capacity anode materials for lithium-ion batteries. Energy Technol 5(2):293–299

  4. Jin RC, Wang QY, Cui YM (2017) MFe2O4 (M ¼ Ni, Co) Nanoparticles anchored on amorphous carboncoated multiwalled carbon nanotubes as anode materials for lithiumion batteries. Carbon 123:448–459

  5. Abbas SM, Ali S, Niaz NA (2014) Superior electrochemical performance of mesoporous Fe3O4/CNT nanocomposites as anode material for lithium ion batteries. J Alloys Compd 611:260–266

  6. Aragon MJ, Perez-Vicente C, Tirado JL (2007) Submicronic particles of manganese carbonate prepared in reverse Micelles: a new electrode material for lithium-ion batteries. Electrochem Commun 9(7):1744–1748

  7. Mu YL, Wang L, Zhao Y (2017) 3D flower-like MnCO3 microcrystals: evolution mechanisms of morphology and enhanced electrochemical performances. Electrochim Acta 251:119–128

  8. Kesavan T, Suresh S, Arulraj I (2014) Facile synthesis of hollow sphere MnCO3: a cheap and environmentally benign anode material for li-ion batteries. Mater Lett 136:411–415

  9. Yan Y, Zhu YC, Yu Y (2012) MnCO3 Microstructures assembled with nanoparticles: shape-controlled synthesis and their application for li-ion batteries. J Nanosci Nanotechnol 12(9):7334–7338

  10. Devaraj S, Liu HY, Balaya P (2014) MnCO3: a novel electrode material for supercapacitors. J Mater Chem A 2(12):4276–4281

  11. Gao MW, Cui XW, Wang RF (2015) Graphene-wrapped mesoporous MnCO3 single crystals synthesized from dynamic floating electrodeposition method for high performance lithium-ion storage. J Mater Chem A 3(27):14126–14133

  12. Zhang L, Mei T, Wang XB (2015) Hierarchical architectured MnCO3 microdumbbells: facile synthesis and enhanced performance for lithium ion batteries. CrystEngComm 17(33):6450–6455

  13. Zhao SQ, Feng F, Yu FQ (2015) Flower-to-petal structural conversion and enhanced interfacial storage capability of hydrothermally crystallize MnCO3 via the in situ mixing of graphene oxide. J Mater Chem A 3(47):24095–24102

  14. Zhou LK, Kong XH, Gao M (2014) Hydrothermal fabrication of MnCO3 @rGO composite as an anode material for high-performance lithium ion batteries. Inorg Chem 53(17):9228–9234

  15. Wang K, Shi YH, Li HH (2016) Assembly of MnCO3 nanoplatelets synthesized at low temperature on graphene to achieve anode materials with high rate performance for lithium-ion batteries. Electrochim Acta 215:267–275

  16. Zhong YR, Yang M, Zhou XL (2015) Orderly packed anodes for high-power lithium-ion batteries with super-long cycle life: rational design of MnCO3/large-area graphene composites. Adv Mater 27(5):806–812

  17. Zhang F, Zhang RH, Liang GM (2013) Carboxylated carbon nanotube anchored MnCO3 nanocomposites as anode materials for advanced lithium-ion batteries. Mater Lett 111:165–168

  18. Liu XM, Huang ZD, Oh SW (2012) Carbon nanotube (CNT)-based composites as electrode material for rechargeable li-ion batteries: a review. Compos Sci Technol 72(2):121–144

  19. Abbas SM, Hussain ST, Ali S (2013) Synthesis of carbon nanotubes anchored with mesoporous Co3O4 nanoparticles as anode material for lithium-ion batteries. Electrochim Acta 105:481–488

  20. Ke QQ, Tang CH, Yang ZC (2015) 3D Nanostructure of carbon nanotubes decorated Co3O4 nanowire arrays for high performance supercapacitor electrode. Electrochim Acta 163:9–15

  21. Shao LY, Shu J, Ma R (2013) Electrochemical characteristics and intercalation mechanism of manganese carbonate as anode material for lithium-ion batteries. Int J Electrochem Sci 8:1170–1180

  22. Pourmortazavi SM, Nasrabadi MR, Dehaghani AAD (2012) Statistical optimization of experimental parameters for synthesis of manganese carbonate and manganese oxide nanoparticles. Mater Res Bull 47(4):1045–1050

  23. Zhang Y, Liu H, Zhu ZH (2013) A green hydrothermal approach for the preparation of graphene/α-MnO2 3D network as anode for lithium ion battery. Electrochim Acta 108:465–471

  24. Zheng MT, Zhang HR, Gong XB (2013) A simple additive-free approach for the synthesis of uniform manganese monoxide nanorods with large specific surface area. Nanoscale Res Lett 8(1):166–172

  25. Wang SS, Li QH, Pu WH (2016) Development of monodispersed MnCO3/graphene nanosheet composite as anode for lithium-ion battery by hydrothermal synthesis. Ionics 22(6):771–778

  26. Feng XY, Shen Q, Shi YC (2016) One-pot hydrothermal synthesis of core-shell structured MnCO3 @C as anode material for lithium-ion batteries with superior electrochemical performance. Electrochim Acta 220:391–397

  27. Wu XL, Cao MH, Lu HY (2006) microemulsion-mediated solvothermal synthesis and morphological evolution of MnCO3 nanocrystals. J Nanosci Nanotechnol 6(7):2123–2128

  28. Mirhashemihaghighi S, León B, Vicente CP (2012) Lithium storage mechanisms and effect of partial cobalt substitution in manganese carbonate electrodes. Inorg Chem 51:5554–5560

  29. Xia H, Lai MO, Lu L (2010) Nanoflaky MnO2/carbon nanotube nanocomposites as anode materials for lithium-ion batteries. J Mater Chem 20(33):6896–6902

  30. Peigney A, Laurent C, Flahaut E (2001) Specific surface area of carbon nanotubes and bundles of carbon nanotubes. Carbon 39(4):507–514

  31. Sakamoto JS, Dunn B (2002) Vanadium oxide-carbon nanotube composite electrodes for use in secondary lithium batteries. J Electrochem Soc 149(1):A26–A30

  32. Wang LB, Tang WJ, Jing Y (2014) Do transition metal carbonates have greater lithium storage capability than oxides? a case study of monodisperse CoCO3 and CoO microspindles. Appl Mater Interfaces 6(15):12346–12352

  33. Su LW, Zhou Z, Qin X (2013) CoCO3 submicrocube/graphene composites with high lithium storage capability. Nano Energy 2(2):276–282

  34. Zhong YR, Su LW, Yang M (2013) Rambutan-like FeCO3 hollow microspheres: facile preparation and superior lithium storage performances. ACS Appl Mater Interfaces 5(21):11212–11217

  35. Ding ZJ, Yao B, Feng JK (2013) Enhanced rate performance and cycling stability of a CoCO3 –polypyrrole composite for lithium ion battery anodes. J Mater Chem A 1(37):11200–11209

  36. Su LW, Hei JP, Wu XB (2017) Ultrathin layered hydroxide cobalt acetate nanoplates face-to-face anchored to graphene nanosheets for high-efficiency lithium storage. Adv Funct Mater 27(10):1605544

  37. Cao ZX, Ding YM, Zhang J (2015) Submicron peanut-Like MnCO3 as an anode material for lithium ion batteries. RSC Adv 69:56299–56303

  38. Zhang F, Zhang R, Feng JK (2014) CdCO3/carbon nanotube nanocomposites as anode materials for advanced lithium-ion batteries. Mater Lett 111:165–168

Download references

Funding

This work was supported by the Scientific Research Program of Hebei Province (No. 16273706D), the Basic Innovation Team of Tangshan (2017).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jing Wang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Su, D., Wang, J., Yang, Z. et al. Stability electrochemical performance of self-assembled hierarchical MnCO3/MWCNT nanocomposite as anode material for lithium-ion batteries. J Solid State Electrochem 22, 3485–3491 (2018). https://doi.org/10.1007/s10008-018-4020-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10008-018-4020-1

Keywords

Navigation