Abstract
It is of great significance in the design and evaluation of anti-impact protective structures to investigate the dynamic mechanical properties of lightweight concrete structures. The present work aims to address this challenging task by the development of an improved large-diameter split Hopkinson pressure bar that can accurately predict the dynamic compressive strength and impact failure characteristics of lightweight concrete under different stress states. Our findings exposed that the impact resistance of lightweight concrete is substantially improved and the failure modes of it have altered under the 3D coupled static–dynamic loads. When the confining pressure remains at the same level and the loading strain rate is low, the unloading curve of lightweight concrete shows a significant hysteresis phenomenon. We have further found that for a higher strain rate the stress–strain curve can be divided into five stages: (i) the inertial-effect-enhanced stage, (ii) the nonlinear elastic deformation stage, (iii) the elastoplastic deformation stage, (iv) the strain-softening stage, and (v) the plastic flow stage. Based on the linear relationships among the logarithm of the strain rate, the dynamic increase factor (DIF), and the confining pressure conditions, we have constructed a two-factor equation for the DIF of lightweight concrete that depends on the confining pressure and the strain rate.
Similar content being viewed by others
References
Delenne, J.Y., Topin, V., Radjai, F.: Failure of cemented granular materials under simple compression: experiments and numerical simulations. Acta Mech. 205, 921 (2009)
Chen, Q., Ma, R., Jiang, Z., Zhu, H., Li, H., Yang, X., Ju, J.W., Yan, Z.: Differential scheme-based stochastic micromechanical framework for saturated concrete repaired by EDM. Acta Mech. 230, 4287–4301 (2019)
Zhang, B.Y., Poon, C.S.: Sound insulation properties of rubberized lightweight aggregate concrete. J. Clean. Prod. 172, 3176–3185 (2018)
Liew, K.M., Kai, M.F., Zhang, L.W.: Carbon nanotube reinforced cementitious composites: an overview. Compos. A Appl. Sci. Manuf. 91, 301–323 (2016)
Wang, S.R., Xiao, H.G., Zou, Z.S., Cao, C., Wang, Y.H., Wang, Z.L.: Mechanical performances of transverse rib bar during pull-out test. Int. J. Appl. Mech. 11, 1950048 (2019)
Zhang, L.W., Sojobi, A.O., Kodur, V.K.R., Liew, K.M.: Effective utilization and recycling of mixed recycled aggregates for a greener environment. J. Clean. Prod. 236, 117600 (2019)
Liew, K.M., Akbar, A.: The recent progress of recycled steel fiber reinforced concrete. Constr. Build. Mater. 232, 117232 (2020)
Wang, X.F., Fang, C., Kuang, W.Q., Li, D.W., Han, N.X., Xing, F.: Experimental study on early cracking sensitivity of lightweight aggregate concrete. Constr. Build. Mater. 136, 173–183 (2017)
Nepomuceno, M.C.S., Pereira-de-Oliveira, L.A., Pereira, S.F.: Mix design of structural lightweight self-compacting concrete incorporating coarse lightweight expanded clay aggregates. Constr. Build. Mater. 166, 373–385 (2018)
Li, D.Q., Masoumi, H., Saydam, S., Hagan, P.C.: Parametric study of fully grouted cable bolts subjected to axial loading. Can. Geotech. J. 56(10), 1514–1525 (2018)
Drapaluk, M.: Influence of reinforced concrete forming features on mechanical characteristics. Tech. J. 13(2), 86–91 (2019)
Li, F.R., Yu, Z.P., Hu, Y.L.: Experimental study on dynamic performance of self-compacting lightweight aggregate concrete under compression. Adv. Civ. Eng. 8, 1–8 (2019)
Wang, H.T., Wang, L.C.: Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete. Constr. Build. Mater. 38, 1146–1151 (2013)
Tian, Y., Shi, S., Jia, K., Hu, S.: Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion. Constr. Build. Mater. 93, 1151–1156 (2015)
Kai, M.F., Zhang, L.W., Liew, K.M.: Graphene and graphene oxide in calcium silicate hydrates: chemical reactions, mechanical behaviors and interfacial sliding. Carbon 146, 181–193 (2019)
Piotrowska, E., Forquin, P., Malecot, Y.: Experimental study of static and dynamic behavior of concrete under high confinement: effect of coarse aggregate strength. Mech. Mater. 92, 164–174 (2016)
He, W., Wu, Y., Liew, K.M.: A fracture energy based constitutive model for the analysis of reinforced concrete structures under cyclic loading. Comput. Methods Appl. Mech. Eng. 197(51–52), 4745–4762 (2008)
Forquin, P., Arias, A., Zaera, R.: Role of porosity in controlling the mechanical and impact behaviors of cement-based materials. Int. J. Impact Eng. 35(3), 133–146 (2018)
Grote, D.L., Park, W., Zhou, M.: Dynamic behavior of concrete at high strain rates and pressures: I. Experimental characterization. Int. J. Impact Eng. 25(9), 869–886 (2001)
Liew, K.M., Pan, Z.Z., Zhang, L.W.: The recent progress of functionally graded CNT reinforced composites and structures. Sci. China Phys. Mech. Astron. 63, 234601 (2020)
Cui, J., Hao, H., Shi, Y.C.: Numerical study of the influences of pressure confinement on high-speed impact tests of dynamic material properties of concrete. Constr. Build. Mater. 171, 839–849 (2018)
Gong, F.Q., Si, X.F., Li, X.B., Wang, S.Y.: Dynamic triaxial compression tests on sandstone at high strain rates and low confining pressures with split Hopkinson pressure bar. Int. J. Rock Mech. Min. Sci. 113, 211–219 (2019)
Yu, Z.P., Tang, R., Cao, P., Huang, Q., Xie, X.H., Shi, F.T.: Multi-axial test and failure criterion analysis on self-compacting lightweight aggregate concrete. Constr. Build. Mater. 215, 786–798 (2019)
Babu, K.G., Babu, D.S.: Behaviour of lightweight expanded polystyrene concrete containing silica fume. Cem. Concr. Res. 33(5), 755–762 (2003)
Wang, G.M., Zhang, B., Shui, Z.H., Tang, D.Y., Kong, Y.: Experimental study on the performance and microstructure of rubberized lightweight aggregate concrete. Prog. Rubber Plast. Recycl. 28(4), 147–156 (2012)
Zhuang, Y.Z., Chen, C.Y., Ji, T.: Effect of shale ceramsite type on the tensile creep of lightweight aggregate concrete. Constr. Build. Mater. 46, 13–18 (2013)
Zhang, D., Yang, W.: Experimental research on bond behaviors between shale ceramsite lightweight aggregate concrete and bars through pullout tests. J. Mater. Civ. Eng. 27(9), 1–4 (2015)
Wang, S.R., Xiao, H.G., Zou, Z.S., Cao, C., Wang, Y.H., Wang, Z.L.: Mechanical performances of transverse rib bar during pull-out test. Int. J. Appl. Mech. 11, 1950048 (2019)
Zhang, X.G., Kuang, X.M., Wang, F., Wang, S.R.: Strength indices and conversion relations for basalt fiber-reinforced recycled aggregate concrete. Dyna 94(1), 82–87 (2019)
Zhou, H.Y., Zhang, X.J., Wang, X.J., Wang, Y.H., Zhao, T.F.: Response of foam concrete-filled aluminum honeycombs subject to quasistatic and dynamic compression. Compos. Struct. 239, 112025 (2020)
Li, D.Q., Li, Y.C., Asadizadeh, M., Masoumi, H., Hagan, P.C., Saydam, S.: Assessing the mechanical performance of different cable bolts based on design of experiments techniques and analysis of variance. Int. J. Rock Mech. Min. Sci. 130, 104307 (2020)
Kocijel, L., Poljak, I., Mrzljak, V., Car, Z.: Energy loss analysis at the gland seals of a marine turbo-generator steam turbine. Tech. J. 14(1), 19–26 (2020)
Bai, E.L., Xu, J.Y., Lu, S., Linc, K.X., Zhang, Y.M.: Comparative study on the dynamic properties of lightweight porous concrete. RSC Adv. 8(26), 14454–14461 (2018)
Bai, Z., Liu, Y.X., Yang, J.T., He, S.Q.: Exploring the dynamic response and energy dissipation capacity of functionally graded EPS concrete. Constr. Build. Mater. 227, 116574 (2019)
Wang, B., Chen, Y.S., Fan, H.L., Jin, F.N.: Investigation of low-velocity impact behaviors of foamed concrete material. Compos. B Eng. 162, 491–499 (2019)
Lu, S., Xu, J.Y., Bai, E., Luo, X.: Preparation and dynamic performance of basalt fiber-reinforced lightweight concrete confined by brass strip. J. Mater. Civ. Eng. 29(9), 1–8 (2017)
Jin, J.F., Li, X.B., Yin, T.B., Zhou, X.J.: Effect of axial static stress of elastic bar on incident stress wave under axial impact loading. Eng. Mech. 30(11), 21–27 (2013)
Li, D.Q., Li, Y.C., Zhu, W.C.: Analytical modelling of load-displacement performance of cable bolts incorporating cracking propagation. Rock Mech. Rock Eng. 1, 1 (2020). https://doi.org/10.1007/s00603-020-02123-1
Wang, S.R., Xiao, H.G., Hagan, P., Zou, Z.S.: Mechanical behavior of fully-grouted bolt in jointed rocks subjected to double shear tests. Dyna 92(3), 314–320 (2017)
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (51774112), and the Doctoral Fund of Henan Polytechnic University in China (B2015-67).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, S.R., Wu, X.G., Yang, J.H. et al. Mechanical behavior of lightweight concrete structures subjected to 3D coupled static–dynamic loads. Acta Mech 231, 4497–4511 (2020). https://doi.org/10.1007/s00707-020-02739-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-020-02739-y