Abstract
Dynamic strain aging has a huge effect on the microstructural mechanical behavior of Inconel 718 high-performance alloy when activated. In a number of experimental researches, significant additional hardening due to the dynamic strain aging phenomenon was reported. A constitutive model without considering dynamic strain aging is insufficient to accurately predict the material behavior. In this paper, a new constitutive model for Inconel 718 high-performance alloy is proposed to capture the additional hardening, which is caused by dynamic strain aging, by means of the Weibull distribution probability density function. The derivation of the proposed constitutive relation for the dynamic strain aging-induced flow stress, the athermal flow stress and the thermal flow stress is physically motivated. The developed model is applied to Inconel 718 high-performance alloy to demonstrate its ability to capture the dynamic strain aging behavior, which was observed in the literature across a wide range of temperatures (300–1200 K) and strain rates from quasi-static loading (0.001/s) to dynamic loading (1100/s).
Similar content being viewed by others
References
Wang, X.Y., Huang, C.Z., Zou, B., Liu, H.L., Zhu, H.T., Wang, J.: Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature. Mater. Sci. Eng. Struct. 580, 385–390 (2013). https://doi.org/10.1016/j.msea.2013.05.062
NematNasser, S., Isaacs, J.B.: Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and Ta-W alloys. Acta Mater. 45(3), 907–919 (1997). https://doi.org/10.1016/S1359-6454(96)00243-1
Nemat-Nasser, S., Guo, W.G., Cheng, J.Y.: Mechanical properties and deformation mechanisms of a commercially pure titanium. Acta Mater. 47(13), 3705–3720 (1999). https://doi.org/10.1016/S1359-6454(99)00203-7
Candioto, K.C.G., Caliari, F.R., Reis, D.A.P., Couto, A.A., Nunes, C.A.: Characterization of the superalloy Inconel 718 after double aging heat treatment. In: Öchsner A., Altenbach H. (eds.) Mechanical and Materials Engineering of Modern Structure and Component Design,. Advanced Structured Materials, vol 70. pp. 293–300. Springer, Cham (2015)
Mulford, R.A., Kocks, U.F.: New observations on the mechanisms of dynamic strain aging and of Jerky flow. Acta Metall. Mater. 27(7), 1125–1134 (1979). https://doi.org/10.1016/0001-6160(79)90130-5
Nalawade, S.A., Sundararaman, M., Kishore, R., Shah, J.G.: The influence of aging on the serrated yielding phenomena in a nickel-base superalloy. Scr. Mater. 59(9), 991–994 (2008). https://doi.org/10.1016/j.scriptamat.2008.07.004
Yuan, K.B., Guo, W.G., Li, P.H., Wang, J.J., Su, Y., Lin, X., Li, Y.P.: Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser metal deposition. Mater. Sci. Eng. Struct. 721, 215–225 (2018). https://doi.org/10.1016/j.msea.2018.02.014
Voyiadjis, G.Z., Song, Y., Rusinek, A.: Constitutive model for metals with dynamic strain aging. Mech. Mater. 129, 352–360 (2019). https://doi.org/10.1016/j.mechmat.2018.12.012
Abed, F.H., Voyiadjis, G.Z.: A consistent modified Zerilli–Armstrong flow stress model for BCC and FCC metals for elevated temperatures. Acta Mech. 175(1–4), 1–18 (2005). https://doi.org/10.1007/s00707-004-0203-1
Voyiadjis, G.Z., Abed, F.H.: Microstructural based models for BCC and FCC metals with temperature and strain rate dependency. Mech. Mater. 37(2–3), 355–378 (2005). https://doi.org/10.1016/j.mechmat.2004.02.003
Cottrell, A.H.: A note on the Portevin–Le Chatelier effect. Philos. Mag. 44(355), 829–832 (1953)
Mccormick, P.G.: Theory of flow localization due to dynamic strain aging. Acta Metall. Mater. 36(12), 3061–3067 (1988). https://doi.org/10.1016/0001-6160(88)90043-0
Keh, A., Nakada, Y., Leslie, W.: Dislocation Dynamics, pp. 81–87. McGraw Hill, New York (1968)
Bergstrom, Y., Roberts, W.: Application of a dislocation model to dynamical strain ageing in alpha-iron containing interstitial atoms. Acta Metall. Mater. 19(8), 815–823 (1971). https://doi.org/10.1016/0001-6160(71)90138-6
Wang, J.J., Guo, W.G., Gao, X.S., Su, J.: The third-type of strain aging and the constitutive modeling of a Q235B steel over a wide range of temperatures and strain rates. Int. J. Plast. 65, 85–107 (2015). https://doi.org/10.1016/j.ijplas.2014.08.017
Rusinek, A., Klepaczko, J.R.: Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress. Int. J. Plast. 17(1), 87–115 (2001). https://doi.org/10.1016/S0749-6419(00)00020-6
Abed, F.H., Voyiadjis, G.Z.: Plastic deformation modeling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of BCC and FCC mechanisms of metals. Int. J. Plast. 21(8), 1618–1639 (2005). https://doi.org/10.1016/j.ijplas.2004.11.003
Rusinek, A., Zaera, R., Klepaczko, J.R.: Constitutive relations in 3-D for a wide range of strain rates and temperatures—application to mild steels. Int. J. Solids Struct. 44(17), 5611–5634 (2007). https://doi.org/10.1016/j.ijsolstr.2007.01.015
Klepaczko, J.R., Rusinek, A., Rodriguez-Martinez, J.A., Pecherski, R.B., Arias, A.: Modelling of thermo-viscoplastic behaviour of DH-36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems. Mech. Mater. 41(5), 599–621 (2009). https://doi.org/10.1016/j.mechmat.2008.11.004
Voyiadjis, G.Z., Abed, F.H.: Effect of dislocation density evolution on the thermomechanical response of metals with different crystal structures at low and high strain rates and temperatures. Arch. Mech. 57(4), 299–343 (2005)
Bammann, D.J., Aifantis, E.C.: On a proposal for a continuum with microstructure. Acta. Mech. 45(1–2), 91–121 (1982). https://doi.org/10.1007/Bf01295573
Klepaczko, J.R.: Modelling of structural evolution at medium and high strain rates, FCC and BCC metals. In: Constitutive Relations and Their Physical Basis, pp. 387–395 (1987)
Kocks, U.F., Argon, A.S., Ashby, M.F.: Thermodynamics and kinetics of slip. Prog. Mater. Sci. 19, 1–281 (1975)
Zerilli, F.J., Armstrong, R.W.: Dislocation-mechanics-based constitutive relations for material dynamics calculations. J. Appl. Phys. 61(5), 1816–1825 (1987). https://doi.org/10.1063/1.338024
Voyiadjis, G.Z., Abed, F.H.: A coupled temperature and strain rate dependent yield function for dynamic deformations of BCC metals. Int. J. Plast. 22(8), 1398–1431 (2006). https://doi.org/10.1016/j.ijplas.2005.10.005
Voyiadjis, G.Z., Abed, F.H.: Implicit algorithm for finite deformation hypoelastic-viscoplastici in FCC metals. Int. J. Numer. Meth. Eng. 67(7), 933–959 (2006). https://doi.org/10.1002/nme.1655
Simon, P., Demarty, Y., Rusinek, A., Voyiadjis, G.Z.: Material behavior description for a large range of strain rates from low to high temperatures: application to high strength steel. Metals 8(10), 795 (2018)
Rittel, D., Zhang, L.H., Osovski, S.: The dependence of the Taylor–Quinney coefficient on the dynamic loading mode. J. Mech. Phys. Solids 107, 96–114 (2017). https://doi.org/10.1016/j.jmps.2017.06.016
Acknowledgements
The financial support provided by a grant from the National Science Foundation EPSCoR CIMM (Grant Number #OIA-1541079) is gratefully acknowledged. The authors also acknowledge experimental data on Inconel 718 superalloy provided to the authors by Professor Weiguo Guo at Northwestern Polytechnical University, People’s Republic of China.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Voyiadjis, G.Z., Song, Y. A physically based constitutive model for dynamic strain aging in Inconel 718 alloy at a wide range of temperatures and strain rates. Acta Mech 231, 19–34 (2020). https://doi.org/10.1007/s00707-019-02508-6
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-019-02508-6