Abstract
Field observations have demonstrated that roof failure occurs spatially in a mine from the time of excavation. It is suspected that time-dependent deformation propagates failure in the rock mass. In this paper, the relaxation test is used to study variation in the time-dependent property of rock and the consequent effect on time-dependent roof failure. This investigation uses a numerical simulation in 3DEC. The relaxation equation is developed from Burgers model. Variations in the time-dependent property in the post-failure region show negligible variation and, therefore, are averaged to represent the time-dependent property of the failed rock. Finally, these parameters are used in the numerical simulation of underground excavations. Two groups of parameters are used to represent the time-dependent property for pre- and post-failure conditions. FISH functions within 3DEC are used to monitor the state of each zone. Once failure is detected, the parameters are changed to the values corresponding to failed rock. The results show that the new relaxation model accurately predicts the time-dependent propagation of the failure zone. The variation of the time-dependent parameters significantly affects the rock mass behavior and roof convergence.
Similar content being viewed by others
References
Aggson JR, Mouyard DP (1988) Geomechanical evaluation of a coal mine arched entry. Geotech Geol Eng 6:185–193
Chin H, Rogers JD (1987) Creep parameters of rocks on an engineering scale. Rock Mech 20:137–146
Chungh Y, Missavage RA (1981) Effects of moisture on strata control in coal mines. Eng Geol 17:241–255
Dolinar DR, Mucho TP, Oyler DC, Pablic J (2000) Utilizing the “advance and relieve” method to reduce horizontal stress affects on the mine roof, a case study. In: 19th Conference on ground control in mining
Fakhimi A, Fairhurst C (1994) A model for the time-dependent behavior of rock. Int J Rock Mech Min Sci Geomech Abstr 31:117–126
Gadde M, Peng S (2004) Effect of in situ stresses on the stability of coal mine development workings. In: Proceedings of the 23rd international conference ground control in mining, pp 92–102
Gadde M, Peng S (2005) Numerical simulation of cutter roof failure under weak roof conditions. In: 2005 SME annual meeting, Salt Lake City
Gale WJ, Nemcik JA, Upfold RW (1987) Application of stress control methods to underground coal mine design in high lateral stressfields. In: 6th ISRM congress, Montreal, pp 897–900
Gao F, Stead D (2013) Discrete element modelling of cutter roof failure in coal mine roadways. Int J Coal Geol 116–117:158–171
Ghorbani M, Sharifzadeh M (2009) Long term stability assessment of Siah Bisheh powerhouse cavern based on displacement back analysis method. Tunn Undergr Sp Technol 24:574–583
Hudson A, Brown T (1972) Studying time-dependent effects in failued rock. In: The 14th US symposium on rock mechanics (USRMS). University Park, Pennsylvania, pp 25–34
Hyams D (2010) CurveExpert Basic 1.4. https://www.curveexpert.net/curveexpert-basic/. Accessed 15 June 2015
Iannacchione A, Coyle P, Prosser L et al (2004) The relationship of roof movement and strata-induced microseismic emissions to roof falls. In: 2004 SME annual meeting, Denver, pp 1–9
Lorig L, Calderon Rojo A (2002) Modeling time-dependent slope deformation. In: ISRM international symposium—EUROCK 2002. International Society for Rock Mechanics, Madeira, pp 137–143
Malan D, Vogler U, Drescher K (1997) Time-dependent behaviour of hard rock in deep level gold mines. J S Afr Inst Min Metall 97:135–147
Maleki H, Dolinar DR, Dubbert J (2003) Rock mechanics study of lateral destressing for the advance-and-relieve mining method. In: 22nd International conference on ground control in mining, Morgantown, pp 105–113
Masuda K (2001) Effects of water on rock strength in a brittle regime. J Struct Geol 23:1653–1657
Molinda GM, Oyler DC, Engineer M, Virginia W (2004) Identifying moisture sensitive roof rocks in coal mines. In: 25th International conference on ground control in mining, pp 57–64
Peng S (1973) Time-dependent aspects of rock behavior as measured by a servocontrolled hydraulic testing machine. Int J Rock Mech Min Sci Geomech Abstr 10:235–246
Peng S, Podnieks ER (1972) Relaxation and the behavior of failed rock. Int J Rock Mech Min Sci Geomech Abstr 9:699–712
Price NJ (1964) A study of the time–strain behavior of coal-measure rocks. Int J Rock Mech Min Sci 1:277–303
Ray AK (2009) Influence of cutting sequence and time effects on cutters and roof falls in underground coal mine—numerical approach. Ph.D. Dissertation, West Virginia University, Morgantown
Su WH, Peng SS (1987) Cutter roof and its cause. Min Sci Technol 4:113–132
Van Eckhout E (1976) The mechanisms of strength reduction due to moisture in coal mine shales. Int J Rock Mech Min Sci Geomech Abstr 13:61–67
Acknowledgements
Funding was provided by National Institute for Occupational Safety and Health (Grant No. 200-2011-40676).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xue, Y., Mishra, B. & Gao, D. Using the Relaxation Test to Study Variation in the Time-Dependent Property of Rock and the Consequent Effect on Time-Dependent Roof Failure. Rock Mech Rock Eng 50, 2521–2533 (2017). https://doi.org/10.1007/s00603-017-1232-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-017-1232-0