Abstract
In positioning systems, magnetic scales consisting of magnetoresistive sensors are widely used in the generation of position signals for machine tools. To obtain a precise position, magnetoresistive elements inside the sensor head output sinusoidal signals through the angle between the magnetization vector and the supplied current direction in order to determine the displacement of the system under a saturated magnetic field. With the development of machine tools, magnetic pattern media have evolved from linear encoders to rotary. In this paper, various medium models are built in order to examine the effects of changes in medium size, and the finite element method is used to simulate optimal size of the magnetic ring and assembly tolerances, such as pitch, yaw, and flying height errors. The results demonstrate that pitch angle error dominating among all errors results in the greatest impact on measurement accuracy. The installation of rotating machinery with the magnetoresistance-based magnetic encoders can follow the suggested design rule presented in this paper to optimize these error sources and quantify them accordingly to reduce assembly error.
Similar content being viewed by others
References
Chen B, Chang JY (2020) Effect of installation error on magnetic characteristic of linear magnetic medium for recording accuracy improvement. IEEE Trans Magn 56:1–6. https://doi.org/10.1109/TMAG.2019.2956545
Dimitrova P, Andreev S, Popova L (2008) Thin film integrated AMR sensor for linear position measurements. Sensors Actuat A Phys 147:387–390. https://doi.org/10.1016/j.sna.2008.03.014
Hoang H, Jeon J (2011) An efficient approach to correct the signals and generate high-resolution quadrature pulses for magnetic encoders. IEEE Trans Ind Electron 58:3634–3646. https://doi.org/10.1109/TIE.2010.2093472
Hsiao HS, Chang JY (2016) Characterization of signal integrity due to pitch–roll–yaw rotation tolerance in magnetic position sensing systems. IEEE Trans Magn 53:1–7. https://doi.org/10.1109/TMAG.2016.2624270
Hsiao HS, Xu ZH, Chin TC, Sung CK, Wang SC, Chang JY (2014) Development of a permanent magnet as magnetizer for linear magnetic pattern manufacturing. IEEE Trans Magn 50:1–4. https://doi.org/10.1109/TMAG.2014.2331250
Ikeda M, Kaku H (1992) MR sensor for magnetic encoder. IEEE Transl J Magn Jpn 7:705–713
Jogschies L, Klaas D, Kruppe R, Rittinger J, Taptimthong P, Wienecke A, Rissing L, Wurz MC (2015) Recent developments of magnetoresistive sensors for industrial applications. Sensors 15:28665–28689. https://doi.org/10.3390/s151128665
Liu F, Wu Y, Wu F (2015) Correction of phase extraction error in phase-shifting interferometry based on Lissajous figure and ellipse fitting technology. Opt Express 23:10794–10807. https://doi.org/10.1364/OE.23.010794
Liu YC, Hsiao HS, Chang JY (2016) Design and validation of polarity-changeable magnetizer for encoding patterns on ring-like rotary encoders. IEEE Trans Magn 53:1–5. https://doi.org/10.1109/TMAG.2016.2626298
Miyashita K, Takahashi T, Yamanaka M (1987) Features of a magnetic rotary encoder. IEEE Trans Magn 23:2182–2184. https://doi.org/10.1109/TMAG.1987.1065634
Shih SW, Hsiao HS, Chang JY (2018) The magnetic encoder apparatus and measuring the displacement of the rotation axis. ROC Patent 1:I662255
Tran TH, Chao PCP, Chien PC (2016) The front-end readout as an encoder IC for magneto-resistive linear scale sensors. Sensors 16:1416. https://doi.org/10.3390/s16091416
Wu ST, Chen JY, Wu SH (2014) A rotary encoder with an eccentrically mounted ring magnet. IEEE Trans Instrum Meas 63:1907–1915. https://doi.org/10.1109/TIM.2014.2302243
Zheng P, Sang Z, Zhong RY, Liu Y, Liu C, Mubarok K, Xu X (2018) Smart manufacturing systems for Industry 4.0: conceptual framework, scenarios, and future perspectives. Front Mech Eng 13:137–150. https://doi.org/10.1007/s11465-018-0499-5
Acknowledgments
The authors greatly appreciate the support from the Ministry of Science and Technology of Taiwan through grant MOST 105-2622-E-007-008-CC2 for the work described herein.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Peng, KY., Chang, JY. Effects of assembly errors on axial positioning accuracy for rotating machinery with magnetoresistance-based magnetic encoders. Microsyst Technol 27, 2507–2514 (2021). https://doi.org/10.1007/s00542-020-05174-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-020-05174-0