Skip to main content
Log in

Chip level design in MEDA based biochips: application of daisy chain based actuation

  • Technical Paper
  • Published:
Microsystem Technologies Aims and scope Submit manuscript

Abstract

Recent advances in microfluidics and micro-fabrication technology enabled the emergence of a new microelectrode-dot-array (MEDA) architecture for microfluidic biochips. The MEDA based design facilitates dynamic routing with variable sized droplets having advanced characteristics such as field programmability, higher level of reconfigurability and scalability. Unlike traditional digital microfluidic biochips, droplet actuations for MEDA based biochips are accomplished through a daisy chain based interconnection of the microelectrodes. This paper provides a detail analysis of daisy chain configuration for different conditions e.g. manipulation of single droplets as well as manipulation of multiple droplets. A daisy chain control sequence for actuation has been proposed in order to evade droplet interference. This paper also defines different actuation sequences for a set of fundamental microfluidic operations namely droplet merging, mixing, splitting and transportation essential for bioassay execution. Finally a daisy chain actuation sequence for overall execution of a specified bioassay from sample preparation to chip level design are demonstrated. Experimental results figure out the daisy chain actuation time for implementation of standard test benches.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  • Becker H (2008) Microfluidics: a technology coming of age. Med Device Technol 19(33):21–24

    Google Scholar 

  • Bhattacharjee S, Banerjee A, Bhattacharya BB (2014) Sample preparation with multiple dilutions on digital micrfluidic biochips. IET Comput Digit Tech 8(1):49–58

    Article  Google Scholar 

  • Chakrabarty K (2011) Design and optimization methods for digital microfluidic biochips: A vision for functional diversity and more than moore. In: IEEE SOC conference (SOCC), pp 5–5

  • Chen Z, Teng DH, Wang GC, Fan S (2011) Droplet routing in high- level synthesis of configurable digital microfluidic biochips based on microelectrode dot array architecture. BioChip J 5:343–352

    Article  Google Scholar 

  • Fair RB (2007) Digital microfluidics: is a true lab-on-a-chip possible? Microfluid Nanofluid 3:245–281

    Article  Google Scholar 

  • Fair RB, Srinivasan V, Ren H, Paik P, Pamula VK, Pollack MG (2003) Electrowetting-based on-chip sample processing for Integrated microfluidics. In: IEEE IEDM Tech Dig, pp 32.5.1-32.5.4

  • Fair RB, Khlystov A, Tailor TD, Ivanov V, Evans RD, Griffin PB, Srinivasan V, Pamula VK, Pollack MG, Zhou J (2007) Chemical and biological applications of digital-microfluidic devices. IEEE Des Test Comput 24(1):10–24

    Article  Google Scholar 

  • Ho Y, Wang G, Lai KY-T et al (2016) Design of a microelectrode cell for programmable lab-on-CMOS platform. In: IEEE International Symposium on Circuits and Systems (ISCAS), pp 2871–2874

  • Keszocze O, Li Z, Grimmer A et al (2017) Exact routing for micro-electrode-dot-array digital microfluidic biochips. In: IEEE/ACM Asia and South Pacific Design Automation Conference (ASP-DAC), pp 708–713

  • Lai KY-T, Yang Y-T, Lee CY (2015) An intelligent digital microfluidic processor for biomedical detection. J Signal Process Syst 78:85–93

    Article  Google Scholar 

  • Li Z, Lai KY-T, Chakrabarty K, Ho TY (2016a) Droplet size-aware high-level synthesis for micro-electrode-dot-array digital microfluidic biochips. IEEE Trans Biomed Circuits Syst 11(3):612–626

    Article  Google Scholar 

  • Li Z, Lai KY-T, Yu P-H et al (2016) High-level synthesis for micro-electrode-dot-array digital microfluidic biochips. In: Proceedings of the IEEE/ACM design automation conf (DAC), pp 146–151

  • O’Neill AT, Walker GM (2009) Chapter 18: linear dilution Microfluidic devices. In: lab-on-a-chip technology (vol 1): fabrication and microfluidics. Caister Academic Press, Norfolk, Aug 2009

  • Ren H, Srinivasan V, Fair RB (2003) Design and testing of an interpolating mixing architecture for electrowetting—based droplet on-chip chemical dilution. Design of Technical Papers Transducers, pp 619–622

  • Su F, Chakrabarty K (2006a) Benchmark for Digital microfluidic design and synthesis. Electrical and Computer Engineering, Duke University. http://www.ee.duke.edu/~fs/Benchmark.pdf

  • Su F, Chakrabarty K (2006b) Digital microfluidic biochips: synthesis, testing, and reconfiguration techniques. CRC Press, Boca Raton

    Google Scholar 

  • Wang G, Teng D, Fan S (2011) Digital microfluidic operations on micro-electrode dot array architecture. IET Nanobiotechnol 5(4):152–160

    Article  Google Scholar 

  • Wang G, Teng D, Lai Y-T et al (2013) Field-programmable lab-on-chip based on microelectrode dot array architecture. IET Nanobiotechnol 8(3):163–171

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Pranab Roy.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Howladar, P., Roy, P., Chatterjee, S. et al. Chip level design in MEDA based biochips: application of daisy chain based actuation. Microsyst Technol 26, 2337–2351 (2020). https://doi.org/10.1007/s00542-020-04811-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00542-020-04811-y

Navigation