Abstract
Alkali-activated concrete (AAC) has emerged as a sustainable construction material due to the environmental issues associated with cement production. This type of concrete is cementless concrete that employs industrial or agro by-product ashes like fly ash (FA) and ground granulated blast furnace slag (GGBFS) in their mixture proportions as the primary binders instead of conventional Portland cement. All concrete composites, including AAC, rely on compressive strength. However, the 28-day compressive strength of concrete is critical in structural design. Therefore, developing an authoritative model for estimating AAC compressive strength saves time, energy, and money while guiding the construction and formwork removal. This study used artificial neural network (ANN), M5P-tree, linear regression, non-linear regression, and multi-logistic regression models to predict blended GGBFS/FA-based AAC’s compressive strength at different mixture proportions curing ages. A comprehensive dataset consists of 469 samples collected in several academic research studies and analyzed to develop the models. In the modeling process, for the first time, twelve effective variable parameters on the compressive strength of the AAC, including the alkaline solution-to-binder ratio, FA content, SiO2/Al2O3 of FA, GGBFS content, SiO2/CaO of GGBFS, fine and coarse aggregate content, NaOH and Na2SiO3 content, Na2SiO3/NaOH ratio, molarity and age of concrete specimens were considered as the modeling input parameters. Various statistical assessment tools such as RMSE, MAE, SI, OBJ value, and R2 were used to evaluate the efficiency of the developed models. The results indicated that the ANN model better predicted GGBFS/FA-based AAC mixtures’ compressive strength than the other models. Moreover, the sensitivity analysis demonstrated that the alkaline liquid-to-binder ratio, NaOH content, and age of concrete specimens were those parameters that significantly influenced the compressive strength of the AAC.
Similar content being viewed by others
References
van Deventer JS, Provis JL, Duxson P, Brice DG (2010) Chemical research and climate change as drivers in the commercial adoption of alkali activated materials. Waste Biomass Valor 1(1):145–155. https://doi.org/10.1007/s12649-010-9015-9
Mahasenan N, Smith S, Humphreys K (2003).The cement industry and global climate change: current and potential future cement industry CO2 emissions. In: Greenhouse gas control technologies-6th international conference. Elsevier, Pergamon, pp 995–1000. https://doi.org/10.1016/B978-008044276-1/50157-4
Guo X, Shi H, Dick WA (2010) Compressive strength and microstructural characteristics of class C fly ash geopolymer. Cement Concr Compos 32(2):142–147
Mejeoumov GG (2007) Improved cement quality and grinding efficiency by means of closed mill circuit modeling. Texas A&M University
Provis JL, Palomo A, Shi C (2015) Advances in understanding alkali-activated materials. Cem Concr Res 78:110–125
Ahmed HU, Mohammed AA, Mohammad AS (2022) The role of nanomaterials in geopolymer concrete composites: A state-of-the-art review. J Build Eng. https://doi.org/10.1016/j.jobe.2022.104062
Weil M, Dombrowski K, Buchwald A (2009) Life-cycle analysis of geopolymer. In: Geopolymers. Woodhead Publishing, pp 194–210
Faraj RH, Ahmed HU, Sherwani AFH (2022) Fresh and mechanical properties of concrete made with recycled plastic aggregates. In: Handbook of sustainable concrete and industrial waste management. Woodhead Publishing, pp 167–185
Boiny HU, Alshkane YM, Rafiq SK (2016) Mechanical properties of cement mortar by using polyethylene terephthalate fibers. In: 5th National and 1st International conference on modern materials and structures in civil engineering, Iran (Islamic Republic of Iran)
Alshkane YM, Rafiq SK, Boiny HU (2017) Correlation between destructive and non-destructive tests on the mechanical properties of different cement mortar mixtures incorporating polyethylene terephthalate fibers. Sulaimania J Eng Sci 4(5):67–73
Ahmed HU, Faraj RH, Hilal N, Mohammed AA, Sherwani AFH (2021) Use of recycled fibers in concrete composites: a systematic comprehensive review. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2021.108769
Hamah Sor N, Hilal N, Faraj RH, Ahmed HU, Sherwani AFH (2021) Experimental and empirical evaluation of strength for sustainable lightweight self-compacting concrete by recycling high volume of industrial waste materials. European J Environ Civil Eng. https://doi.org/10.1080/19648189.2021.1997827
Davidovits J (2008) Geoplolymer chemistry and application. institute Geopolymer Saint-Quentin
Mohammed AA, Ahmed HU, Mosavi A (2021) Survey of mechanical properties of geopolymer concrete: a comprehensive review and data analysis. Materials 14(16):4690
Sumesh M, Alengaram UJ, Jumaat MZ, Mo KH, Alnahhal MF (2017) Incorporation of nano-materials in cement composite and geopolymer based paste and mortar–a review. Constr Build Mater 148:62–84
Sharif HH (2021) Fresh and mechanical characteristics of eco-efficient geopolymer concrete incorporating nano-silica: an overview. Kurdistan J Appl Res, 64–74
Ahmed HU, Mohammed AA, Rafiq S, Mohammed AS, Mosavi A, Sor NH, Qaidi S (2021) Compressive strength of sustainable geopolymer concrete composites: a state-of-the-art review. Sustainability 13(24):13502
Yildirim G, Sahmaran M, Ahmed HU (2015) Influence of hydrated lime addition on the self-healing capability of high-volume fly ash incorporated cementitious composites. J Mater Civ Eng 27(6):04014187
Bakharev T (2005) Geopolymeric materials prepared using class F fly ash and elevated temperature curing. Cem Concr Res 35(6):1224–1232
Fang G, Ho WK, Tu W, Zhang M (2018) Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature. Constr Build Mater 172:476–487
Kumar S, Kumar R, Mehrotra SP (2010) Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer. J Mater Sci 45(3):607–615
Deb PS, Nath P, Sarker PK (2014) The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature. Mater Des 1980–2015(62):32–39
Nath P, Sarker PK (2014) Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition. Constr Build Mater 66:163–171
Saha S, Rajasekaran C (2017) Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag. Constr Build Mater 146:615–620
Lee NK, Lee HK (2013) Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature. Constr Build Mater 47:1201–1209
Phoo-ngernkham T, Maegawa A, Mishima N, Hatanaka S, Chindaprasirt P (2015) Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer. Constr Build Mater 91:1–8
Duxson P, Fernández-Jiménez A, Provis JL, Lukey GC, Palomo A, van Deventer JS (2007) Geopolymer technology: the current state of the art. J Mater Sci 42(9):2917–2933
Ravitheja A, Kumar NK (2019) A study on the effect of nano clay and GGBS on the strength properties of fly ash based geopolymers. Mater Today Proc 19:273–276
Neville AM, Brooks JJ (2010) Concrete technology
ASTM C39/C39M (2017) Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken, PA, USA
The European Standard BS EN12390-3 (2009) Testing on hardned concrete:part-3: compressive strength of test specimens
Nath P, Sarker PK (2015) Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature. Cement Concr Compos 55:205–214
Nath P, Sarker PK (2017) Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete. Constr Build Mater 130:22–31
De Vargas AS, Dal Molin DC, Vilela AC, Da Silva FJ, Pavao B, Veit H (2011) The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers. Cement Concr Compos 33(6):653–660
Topark-Ngarm P, Chindaprasirt P, Sata V (2015) Setting time, strength, and bond of high-calcium fly ash geopolymer concrete. J Mater Civ Eng 27(7):04014198
Vijai K, Kumutha R, Vishnuram BG (2010) Effect of types of curing on strength of geopolymer concrete. Int J Phys Sci 5(9):1419–1423
Muhammad N, Baharom S, Ghazali NAM, Alias NA (2019) Effect of heat curing temperatures on fly ash-based geopolymer concrete. Int J Eng Technol 8:15–19
Ibrahim M, Johari MAM, Maslehuddin M, Rahman MK (2018) Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete. Constr Build Mater 173:573–585
Sarker PK (2011) Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete. Mater Struct 44(5):1021–1030
Wallah SE (2010) Creep behaviour of fly ash-based geopolymer concrete. Civil Eng Dimens 12(2):73–78
Olivia M, Sarker P, Nikraz H (2008) Water penetrability of low calcium fly ash geopolymer concrete. Proc ICCBT2008-A, 46:517–530
Barbosa VF, MacKenzie KJ (2003) Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate. Mater Res Bull 38(2):319–331
Van Chanh N, Trung BD, Van Tuan D (2008) Recent research geopolymer concrete. In: The 3rd ACF international conference-ACF/VCA, Vietnam, vol 18, pp 235–241
Jindal BB, Parveen, Singhal D, Goyal A (2017) Predicting relationship between mechanical properties of low calcium fly ash-based geopolymer concrete. Trans Indian Ceram Soc 76(4):258–265
Embong R, Kusbiantoro A, Shafiq N, Nuruddin MF (2016) Strength and microstructural properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive aggregate. J Clean Prod 112:816–822
Albitar M, Visintin P, Ali MM, Drechsler M (2015) Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash. KSCE J Civ Eng 19(5):1445–1455
Jaydeep S, Chakravarthy BJ (2013) study on fly ash based geo-polymer concrete using admixtures. Int J Eng Trends Technol 4(10):4614–4617
Golafshani EM, Behnood A, Arashpour M (2020) Predicting the compressive strength of normal and high-performance concretes using ANN and ANFIS hybridized with grey wolf optimizer. Constr Build Mater 232:117266
George UA, Elvis MM (2019) Modelling of the mechanical properties of concrete with cement ratio partially replaced by aluminium waste and sawdust ash using artificial neural network. SN Appl Sci 1(11):1514
Mehdipour V, Stevenson DS, Memarianfard M, Sihag P (2018) Comparing different methods for statistical modeling of particulate matter in Tehran Iran. Air Qual Atmos Health 11(10):1155–1165
Sihag P, Jain P, Kumar M (2018) Modelling of impact of water quality on recharging rate of storm water filter system using various kernel function based regression. Model Earth Syst Environ 4(1):61–68
Shahmansouri AA, Bengar HA, Ghanbari S (2020) Compressive strength prediction of eco-efficient GGBS-based geopolymer concrete using GEP method. J Build Eng. https://doi.org/10.1016/j.jobe.2020.101326
Velay-Lizancos M, Perez-Ordoñez JL, Martinez-Lage I, Vazquez-Burgo P (2017) Analytical and genetic programming model of compressive strength of eco concretes by NDT according to curing temperature. Constr Build Mater 144:195–206
Gholampour A, Mansouri I, Kisi O, Ozbakkaloglu T (2020) Evaluation of mechanical properties of concretes containing coarse recycled concrete aggregates using multivariate adaptive regression splines (MARS), M5 model tree (M5Tree), and least squares support vector regression (LSSVR) models. Neural Comput Appl 32(1):295–308
Behnood A, Olek J, Glinicki MA (2015) Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm. Constr Build Mater 94:137–147
Ahmed HU, Mohammed AS, Mohammed AA, Faraj RH (2021) Systematic multiscale models to predict the compressive strength of fly ash-based geopolymer concrete at various mixture proportions and curing regimes. PLoS ONE 16(6):e0253006
Mohammed A, Rafiq S, Sihag P, Kurda R, Mahmood W (2020) Soft computing techniques: systematic multiscale models to predict the compressive strength of HVFA concrete based on mix proportions and curing times. J Buil Eng. https://doi.org/10.1016/j.jobe.2020.101851
Shahmansouri AA, Yazdani M, Ghanbari S, Bengar HA, Jafari A, Ghatte HF (2020) Artificial neural network model to predict the compressive strength of eco-friendly geopolymer concrete incorporating silica fume and natural zeolite. J Clean Prod 279:123697
Behnood A, Verian KP, Gharehveran MM (2015) Evaluation of the splitting tensile strength in plain and steel fiber-reinforced concrete based on the compressive strength. Constr Build Mater 98:519–529
Faraj RH, Mohammed AA, Mohammed A, Omer KM, Ahmed HU (2021) Systematic multiscale models to predict the compressive strength of self-compacting concretes modified with nanosilica at different curing ages. Eng Comput. https://doi.org/10.1007/s00366-021-01385-9
Singh B, Rahman MR, Paswan R, Bhattacharyya SK (2016) Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete. Constr Build Mater 118:171–179
Ding Y, Shi CJ, Li N (2018) Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature. Constr Build Mater 190:787–795
Farhan NA, Sheikh MN, Hadi MN (2019) Investigation of engineering properties of normal and high strength fly ash based geopolymer and alkali-activated slag concrete compared to ordinary Portland cement concrete. Constr Build Mater 196:26–42
Rajini B, Rao AN, Sashidhar C (2020) Micro-level studies of fly ash and GGBS–based geopolymer concrete using Fourier transform infra-Red. Mater Today Proc 46:586–589. https://doi.org/10.1016/j.matpr.2020.11.291
Nagajothi S, Elavenil S (2020) Effect of GGBS addition on reactivity and microstructure properties of ambient cured fly ash based geopolymer concrete. Silicon, 1–10
Singhal D, Junaid MT, Jindal BB, Mehta A (2018) Mechanical and microstructural properties of fly ash based geopolymer concrete incorporating alccofine at ambient curing. Constr Build Mater 180:298–307
Abhilash P, Sashidhar C, Reddy IR (2016) Strength properties of fly ash and GGBS based geo-polymer concrete. Int J ChemTech Res, ISSN, 0974–4290
Ramujee K, PothaRaju M (2017) Mechanical properties of geopolymer concrete composites. Mater Today Proc 4(2):2937–2945
Xie T, Ozbakkaloglu T (2015) Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature. Ceram Int 41(4):5945–5958
Jawahar JG, Mounika G (2016) Strength properties of fly ash and GGBS based geopolymer concrete. Asian J Civ Eng 17(1):127–135
Anıl NİŞ (2019) Compressive strength variation of alkali activated fly ash/slag concrete with different NaOH concentrations and sodium silicate to sodium hydroxide ratios. J Sustain Constr Mater Technol 4(2):351–360
Chindaprasirt P, Chalee W (2014) Effect of sodium hydroxide concentration on chloride penetration and steel corrosion of fly ash-based geopolymer concrete under marine site. Constr Build Mater 63:303–310
Rafeet A, Vinai R, Soutsos M, Sha W (2017) Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes. Constr Build Mater 147:130–142
Shaikh FUA, Vimonsatit V (2015) Compressive strength of fly-ash-based geopolymer concrete at elevated temperatures. Fire Mater 39(2):174–188
Bhikshma V, Kumar TN (2014) Mechanical properties of flyash based geopolymer concrete with addition of GGBS. Sustain Solut Struct Eng Constr (SSEC), 451–456
Çevik A, Alzeebaree R, Humur G, Niş A, Gülşan ME (2018) Effect of nano-silica on the chemical durability and mechanical performance of fly ash based geopolymer concrete. Ceram Int 44(11):12253–12264
Nagajothi S, Elavenil S (2018) Parametric studies on the workability and compressive strength properties of geopolymer concrete. J Mech Behav Mater 27:3–4. https://doi.org/10.1515/jmbm-2018-0019
Reddy MS, Dinakar P, Rao BH (2018) Mix design development of fly ash and ground granulated blast furnace slag based geopolymer concrete. J Build Eng 20:712–722
Bashir I, Kapoor K, Sood H (2017) An experimental investigation on the mechanical properties of geopolymer concrete. Int J Latest Res Sci Technol 6(3):33–36
Chithra KS, Binoy T, Harismitha A, Ananth RK, Deepa M (2021) A study on economic feasibility of fly ash and ground granulated blast furnace slag based geopolymer concrete. In: IOP conference series: materials science and engineering. IOP Publishing, 1114,(1): 012007
Hassan A, Arif M, Shariq M (2019) Effect of curing condition on the mechanical properties of fly ash-based geopolymer concrete. SN Appl Sci 1(12):1694
Karthik A, Sudalaimani K, Kumar CV (2017) Investigation on mechanical properties of fly ash-ground granulated blast furnace slag based self curing bio-geopolymer concrete. Constr Build Mater 149:338–349
Vijai K, Kumutha R, Vishnuram BG (2011) Experimental investigations on mechanical properties of geopolymer concrete composites
Partha SD, Pradip N, Prabir KS (2013) Strength and permeation properties of slag blended fly ash based geopolymer concrete. Adv Mater Res 651:168–173
Ghafoor MT, Khan QS, Qazi AU, Sheikh MN, Hadi MNS (2020) Influence of alkaline activators on the mechanical properties of fly ash based geopolymer concrete cured at ambient temperature. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.121752
Sivakumar A, Kishore R (2017) Evaluation of mechanical properties of fly ash and ggbs based geopolymer concrete. JETIR 4:1028–1033
Krishnaraja AR, Sathishkumar NP, Kumar TS, Kumar PD (2014) Mechanical behaviour of geopolymer concrete under ambient curing. Int J Sci Eng Technol 3(2):130–132
Vignesh P, Vivek K (2015) An experimental investigation on strength parameters of flyash based geopolymer concrete with GGBS. Int Res J Eng Technol 2(2):135–142
Raut U, Shalini A, Prabu B (2019) Strength of geopolymer concrete reinforced with basalt fibre. Int Res J Eng Technol 6:3811–3817
Das SK, Shrivastava S (2020) Siliceous fly ash and blast furnace slag based geopolymer concrete under ambient temperature curing condition. Struct Concr. https://doi.org/10.1002/suco.201900201
Nuruddin MN, Kusbiantoro AK, Qazi SQ, Darmawan MD, Husin NH (2011) Development of geopolymer concrete with different curing conditions. IPTEK J Technol Sci, 22(1). https://doi.org/10.12962/j20882033.v22i1.54
Oyebisi S, Ede A, Olutoge F, Omole D (2020) Geopolymer concrete incorporating agro-industrial wastes: Effects on mechanical properties, microstructural behaviour and mineralogical phases. Constr Build Mater 256:119390
Wardhono A, Gunasekara C, Law DW, Setunge S (2017) Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes. Constr Build Mater 143:272–279
Zhao R, Yuan Y, Cheng Z, Wen T, Li J, Li F, Ma ZJ (2019) Freeze-thaw resistance of class F fly ash-based geopolymer concrete. Constr Build Mater 222:474–483
Mohammed A, Rafiq S, Sihag P, Kurda R, Mahmood W, Ghafor K, Sarwar W (2020) ANN, M5P-tree and non-linear regression approaches with statistical evaluations to predict the compressive strength of cement-based mortar modified with fly ash. J Market Res 9(6):12416–12427
FM Zain M, M Abd S (2009) Multiple regression model for compressive strength prediction of high performance concrete. J Appl Sci 9(1):155–160
Mohammed A, Burhan L, Ghafor K, Sarwar W, Mahmood W (2021) Artificial neural network (ANN), M5P-tree, and regression analyses to predict the early age compression strength of concrete modified with DBC-21 and VK-98 polymers. Neural Comput Appl 33(13):7851–7873
Mohammed AS (2018) Vipulanandan models to predict the electrical resistivity, rheological properties and compressive stress-strain behavior of oil well cement modified with silica nanoparticles. Egypt J Pet 27(4):1265–1273
Quinlan Ross J (1992) Learning with continuous classes. In: 5th Australian Joint Conference on Artificial Intelligence, Singapore, pp 343–348
Salih A, Rafiq S, Sihag P, Ghafor K, Mahmood W, Sarwar W (2021) Systematic multiscale models to predict the effect of high-volume fly ash on the maximum compression stress of cement-based mortar at various water/cement ratios and curing times. Measurement 171:108819
Mohammed A, Rafiq S, Sihag P, Mahmood W, Ghafor K, Sarwar W (2020) ANN, M5P-tree model, and non-linear regression approaches to predict the compression strength of cement-based mortar modified by quicklime at various water/cement ratios and curing times. Arab J Geosci 13(22):1–16
Silva RV, De Brito J, Dhir RK (2014) Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Constr Build Mater 65:201–217
Li MF, Tang XP, Wu W, Liu HB (2013) General models for estimating daily global solar radiation for different solar radiation zones in mainland China. Energy Convers Manage 70:139–148
Hardjito D, Wallah SE, Sumajouw DM, Rangan BV (2004) On the development of fly ash-based geopolymer concrete. Mater J 101(6):467–472
Mahmood W, Mohammed A, Ghafor K, Sarwar W (2021) Model technics to predict the impact of the particle size distribution (PSD) of the sand on the mechanical properties of the cement mortar modified with fly ash. Iranian J Sci Technol Trans Civil Eng 45(3):1657–1684
Joseph B, Mathew G (2012) Influence of aggregate content on the behavior of fly ash based geopolymer concrete. Scientia Iranica 19(5):1188–1194
Al-Azzawi M, Yu T, Hadi MN (2018) Factors affecting the bond strength between the fly ash-based geopolymer concrete and steel reinforcement. Structures 14:262–272
Hu W, Nie Q, Huang B, Su A, Du Y, Shu X, He Q (2018) Mechanical property and microstructure characteristics of geopolymer stabilized aggregate base. Constr Build Mater 191:1120–1127
Sumajouw DMJ, Hardjito D, Wallah SE, Rangan BV (2007) Fly ash-based geopolymer concrete: study of slender reinforced columns. J Mater Sci 42(9):3124–3130
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
None.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ahmed, H.U., Mohammed, A.S. & Mohammed, A.A. Multivariable models including artificial neural network and M5P-tree to forecast the stress at the failure of alkali-activated concrete at ambient curing condition and various mixture proportions. Neural Comput & Applic 34, 17853–17876 (2022). https://doi.org/10.1007/s00521-022-07427-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00521-022-07427-7