Abstract
AI technologies are absolutely changing the rules of the game all around the world. However, the diffusion rate of AI is widely ranging across countries. This study aims to fulfill a research gap regarding multidimensional comprehensive studies which could provide academic information to the policy makers, technology producers, adopters of technology and the workforce. Friction against the use of new technologies has been existing since the beginning of industrial revolution. This study examines the possible factors behind the friction in AI adoption process. The subject of the course in this study is the supply chain resilience which is a keystone in healthcare sector especially after the recent pandemics. Studies promise the efficiency improvements and cost reductions in healthcare when AI technologies are implemented in supply chain management of the industry. This paper proposes a fuzzy Aczel–Alsina-based decision-making model to analyze the factors that enhance the diffusion of AI technologies in healthcare supply chain management. The model is tested for the case of Turkish healthcare industry. Fuzzy decision-making model is used to solve the complexities in unveiling success factors in the implementation and diffusion phases. Results show that among many other factors tested, technology intensity, trialability and government support and policies are the most important AI success factors. The results are discussed to reveal potential policy recommendations.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
1 Introduction
In his famous quote Elbert Hubbard states “One machine can do the work of fifty ordinary men. No machine can do the work of an extraordinary man”. AI is capable of lot. From business, private sector and management to government, public sector and science and technology, AI increasing its orbit with ground-breaking improvements in machine learning and autonomous decision-making. However, it is the human ability to decide how to use, where to use and to what extent to use the AI. Different industries are in need of AI for different reasonings under different conditions. Manufacturing (Chatterjee et al. 2021; Waltersmann et al. 2021), banking, insurance, automation, energy (Ahmad et al. 2021), education, digital commerce, tourism and healthcare are only some of these industries in where AI has been changing the rule of the game. Challenges are also emerging in the adaptation process causing organizations to stagger in using new strategies. In this sense, multidisciplinary approaches are required to ease transformation period (Dwivedi et al. 2021). Still, we are in need of these extraordinary men who are capable of understanding and realizing the actual potentials of AI for the sake of humankind.
Artificial intelligence (AI) is in the focus of economists and managers as well as mathematicians and engineers. As the technology advances, the adoption of AI in businesses accelerating (Wamba-Taguimdje et al. 2020). Studies show that AI technologies are highly useful in creating business value (Enholm et al. 2022). A study by Ransbotham et al. shows that even in 2017, 85% of organizations consider AI as a strategic tool to achieve competitive advantage (Ransbotham et al. 2017). Although there are challenges for some organizations to use AI technologies, possible extended benefits attract managers to find solutions in adaptation process of AI (Fountain et al. 2019).
Especially, in solving supply chain issues AI practices are of special interest. Supply chain is a complex network involving all of the stages in the transformation of the raw materials into delivered products to the customers. The connections among economic units, activities, organizations such as suppliers, manufacturers, logistic units, sellers and customers create the complexity. Lately, globalization added new positive and negative dimensions to the issue such as extending opportunities for lower costs (Roh et al. 2014) or increasing business uncertainty (Kim and Chai 2016). In that respect, AI solutions are highly promising in supply chain management. Dora et al. (2022) reveal the challenges in practicing the AI technologies for supply chain issues (Dora et al. 2022). Supply chain management requires fast and sound decision-making given a big, multidimensional data that AI technologies can be successful on (Barryannis et al. 2019). Data from Statista show that as of 2022, global widescale AI adoption rate in supply chain and manufacturing businesses reaches 34% and 32% uses AI limited. For 11% of the respondents AI is critical. In 2025, almost %95 of the business is expected to adopt AI technologies in supply chain (Thormundsson 2022). Numbers imply that there is a strong necessity to analyze the pre-conditions and consequences of AI practices in supply chain management in different industries.
Efficient supply chain creates a process in which the product is offered to the customer with lower prices and higher quality conditions. Firms increase their competitive advantage through effectively developed supply chain (Li et al. 2006). Other business functions, product development, marketing, operations, distribution, finance and customer service affect and are affected by efficient supply chain. Therefore, supply chain management plays a crucial role in firm performance (Ou et al. 2010). In the wake of recent crises and political instabilities in global scale such as 2008 financial crisis, Brexit, USA-China trade war, Russia–Ukraine war, conflicts in Middle East and North Africa, COVID-19 pandemics, earthquakes, fuel crisis, and increasing security concerns with terrorism supply chain in many industries have been taking big hits globally and locally. The resilience of supply chain is more important than ever now. Building resilient supply chains is in the focus of international institutions such as World Economic Forum (Bahatia et al. 2013), World Bank (Brenton et al. 2022), International Monetary Fund (Jiang et al. 2021) in the last decade. Digitalization and the use of new technologies is the first requirement listed in the to-do lists. Use of new technologies could improve resilience of supply chain through widening flexibility, developing abundancy, creating cooperation and strengthening agility (Tukamuhabwa et al. 2015). AI techniques are specifically promising to increase the resilience of supply chain. Belhadi et al. (2022) analyzed 479 manufacturing companies and determined the most effective AI solutions which add to supply chain resilience. Fuzzy logic programming, machine learning big data and agent-based systems are identified as most effective methods (Belhadi et al. 2022).
Among other industries, healthcare industry is object to increasing number of new problems put by pandemic, wars or political instabilities such as sustainability issues or inequities (Isik and Aktürk 2022). The use of AI in medicine or medical specialties benefits patients as well as doctors (Kumar et al. 2023a, b). Mimicking human functions, AI shifted the healthcare especially by providing accurate analysis of big healthcare data (Jiang et al. 2017). Sustainability of the supply chain is another dimension that can be improved through AI technologies (Naz et al. 2022). AI application was quite effective during COVID-19 pandemic in detecting virus spreading estimates, patient diagnosis and vaccine development (Yi et al. 2022). Indeed, the paradigm shift in health industry caused rise of new approach health 4.0 with the wide practice of Industry 4.0 technologies in health sector through designing precision medicine, clinical optimization via AI tools, machine health awareness analytics (Siodia and Jindal 2021). Karatas et al. (2022) survey the literature on how big data changed the healthcare services via Internet of Things implementations, smart sensors and wearables (Karatas et al. 2022).
Higher costs in healthcare industry are real trouble for all of the shareholders. Especially in the recent years, due to reflection of inflation in the sector through higher factor prices (Fleron et al. 2022) and urgent requirement for research and development activities (Oliver et al. 2019), costs are accelerating. Therefore, the role of supply chain management is getting more and more important. The quality of healthcare, success of treatment and so the patience satisfaction are directly related to the availability of medical supplies and physicians. That is why supply chain management is a keystone for efficiently working healthcare industry (Mathur et al. 2018). While improving the supply chain management in healthcare industry is the interest of organizations, use of recent technologies and AI is getting more and more common (Eskandari-Khanghahi et al. 2018; Mosallanezhad et al. 2023; Haghjoo et al. 2020; Goodarzian et al. 2021; Damoah et al. 2021; Bag et al. 2023; Benzidia, et al. 2021; Kamran et al. 2023).
AI technologies are used to perform tasks that require human intelligence. However, the full potential of AI is not in use. In 2017, adoption rate of AI was only 23% according to a survey of 3000 companies in global scale (Ransbotham et al. 2017). Factors and conditions of successful implementation of AI technologies are newly started to be analyzed in academia (Kinkel et al. 2022). Technology diffusion in the society determines the extent of successful use of new technologies. The barriers to technology adoption in genera results from wide range of technical, economic and social issues. Parente and Prescott (1994) shows that barriers to technology adoption differ across countries and industries. Societal differences can play a crucial role in effect. Moreover, even small differences can cause large income inequalities among countries and further barriers to new technology adoptions (Parente and Prescott 1994). In his seminal work which dates back to 1962, Rogers (2010) emphasizes the importance of social process. Diffusion of innovations requires social acceptance as well as technical infrastructure (Rogers 2010). When it comes to diffusion of AI, technical barriers are also accompanied with social considerations such as unemployment risk, lack of know-how and environmental concerns (Isik et al. 2023; Cubric 2020).
The literature is short of comprehensive studies that put on a multidimensional approach on diffusion of AI in healthcare industry (Almaiah et al. 2022; Gardas 2022). Kumar et al. (2023a) uses a multidimensional analysis to identify the success factors of practicing AI techniques in healthcare management and use a case of India. Although the healthcare is in enormous need of implementing AI techniques, diffusion rate of AI is critical. The number of studies that search for AI diffusion in different countries and in different industries should increase for realizing potentials of AI in a near future.
This study proposes to contribute in fulfilling the research gap by providing a structure to explore necessary conditions for successful implementation of AI in an industry. To this aim, the supply chain of healthcare in Turkiye is considered in case. In constructing the case study, the paper aims to choose an environment that is suitable for the introduction of the new technologies but there could be some factors that can prevent easy adoption process. A developing country of high-middle income level has such a macroeconomic environment, and at the same time the friction in the adoption process can be tested for different factors. Therefore, the healthcare sector of Turkiye is analyzed as the use of AI technologies are promoted both in public and private sector. Therefore, the study also contributes to supply chain management literature by analyzing the healthcare industry and discussing some policy implications for managers, regulatory authorities and other shareholders of the industry.
In this study, the fuzzy Aczel–Alsina-based Logarithmic Methodology of Additive Weights (LMAW) (Deveci et al.) is used to determine the weights of the indicators. The LMAW method has recently been successfully applied to various multi-criteria decision-making (MCDM) problems. Tešić et al. (2023) improved a fuzzy LMAW-based gray MARCOS model for selection of a dump truck. Božanić et al. (2022) developed a triangular fuzzy number-based LMAW to solve the problem of the location selection for a landing operations point in combat operations of the army. Asadi et al. (2023) examined the adoption of blockchain technology in small and medium-sized enterprises using fuzzy LMAW. Pamučar et al. (2023) studied a decision analysis model including fuzzy LMAW model for smart mobility system development under circular economy. Additionally, fuzzy MCDM-based models have been applied to decision-making problems (Alavi et al. 2022; Abbas et al. 2022; Adak and Kumar 2023; Cubukcu and Cantekin 2022; Tešić et al. 2023). The used model for determining the weights of criteria has nonlinear fuzzy Aczel–Alsina functions that provide the processing of complex and uncertain information. Finally, the model enables objective reasoning while regarding the interrelationships between decision attributes.
The rest of the paper is organized as follows: Sect. 2 presents the literature review. The problem definition is given in Sect. 3. Section 4 presents the Aczel–Alsina norms decision-making model. The experimental results are provided in Sect. 5. Section 6 presents the results and discussion, and Sect. 7 summarizes the conclusion.
2 Literature review
2.1 Technology diffusion models
Diffusion of technology is the process by which new technology is used and spread through different channels (Rogers 2010). The extent that the diffusion of a new technology, an innovation or a new product will be successful after it is introduced depends on many factors that are country- and industry-specific. Since Gabriel Tarde introduced the diffusion of innovation theory and sketched the first S-curve of technology diffusion in 1903 (Barry and Thrift 2007), vast number of studies focused on the factors that influence the success rate of diffusion or time of success. In 1962, Rogers extended the adopters model by Ryan and Gross (1943) (Rogers 2010).
As Kaminski (2011) summarizes according to Rogers’s diffusion of technology theory, consumers of a technology can be categorized in five groups according to their adaptation behavior: Technology enthusiasts, visionaries, pragmatists, conservatives and skeptics. The peer networks are crucial for spread of the new technology. Also, the time stages from the point when the technology is first introduced to the point when it is fully realized should be carefully followed. Characteristics of the new technology as observability, relative advantage, compatibility, trialability and complexity are important during the adoption process. Communication channels and the social system are critical for the diffusion or the new technology (Kaminski 2011).
Geroski (2000) provides a compact analysis of technology diffusion models. Derived from typical S-curve models, epidemic model focuses on the effects of social elements on information spillover (Lundbald 2003). Model explains the major barrier in adoption process as the lack of information. Alternatively, probit model explains the diffusion process in effect of individual choices of decision-makers. Firms or consumers of a new technology in general choose to adopt a new technology depending on the expected returns. Therefore, probit models suggest that firm size, investment size, opportunity costs and switching costs, supply process of the new technology and technological expectations in the ecosystem are the limits in diffusion process. Population models, on the other hand, focus on the population of firms that have already realized the new technology. The aggregate use of the technology creates an unfolding impact on society (Geroski 2000).
AI technologies are one of the most promising new technologies. Empirical data and cases on country and firm level show that the diffusion of technology theory and the models derived from it are useful in analyzing the adoption rate of AI. Kinkel et al. (2022) provides a comprehensive analysis of a cross-national survey of 655 companies from manufacturing industry. They show that the organizational factors such as firm size, digitalization, research and activity concentration are significantly influential on the successful implementation of AI techniques. Information structure is also effective (Kinkel et al. 2022). Type of industry, data quality, insecure data, lack of customized solutions, compatibility issues and high costs are also addressed as barriers in implementing AI technologies (Lee et al. 2018; Bughin et al. 2017; Geissbauer et al. 2017).
2.2 AI technologies in healthcare sector and supply chain management
Ali et al. (2023) provided a comprehensive guide regarding the recent uses of AI technologies in healthcare sector (Ali et al. 2023). AI technologies make healthcare data more available and provide more rapid, accurate analysis. Although AI’s potential substitution for human physicians is a kind of threat for the labor force in the industry, it doesn’t look like a near future scenario. AI provides support in clinical decisions through recent medical information from publications or clinical practices. It reduces health risks by analyzing massive patient data. Electronic health record systems become more efficient with the help of AI technologies. Machine learning, natural language processing, rule-based expert systems, physical robots and robotic process automation are the most common AI methods used in healthcare (Davenport and Kalakota 2019; Jiang et al. 2017).
Another practice field of AI in healthcare is in administrative issues and in supply chain management. Arji et al. (2023) identify AI, block chain and big data analytics as the most important technologies used in healthcare supply chain management (Arji et al. 2023). Healthcare supply chain is a very complex network which is highly significant in success of treatments and patient satisfaction. Resource management requires organization of supplies, delivery of medical products to physicians or patients is the major focus of the supply chain, and failure of the system costs the industry a huge waste (Donner 2014). Cooperation among supply chain partners provides cost effective process in the industry (Nachtmann and Pohl 2009). Yet, the survey by Nachtmann and Pohl (2009) show that 60% of the respondents reveal that missing trust prevents the collaboration in the industry. Kwon et al. (2016) propose that successful deployment of supply chain management in healthcare requires adoption of innovative tools to implement standardized supply chain principles. Therefore, an economic surplus can be created which can be used to overcome problems in supply chain community. The talent shortage can be reduced through surplus created by innovations (Kwon et al. 2016). Cannavale et al. (2022) show that AI is helpful in providing the information such as up-to-date prices, stock levels and delivery options. This kind of information is required to prevent coordination failures in supply chain community (Cannavale et al. 2022).
Innovations are proven to be helpful in solving issues in supply chain management in healthcare (Kwon et al. 2016; Cannavale et al. 2022). However, the diffusion of innovation is not straightforward. In the health report prepared by Cain and Mittman, success of innovations’ implementation is explained to be strongly tied to ten dimensions: Relative advantage of the innovation, trialability of the innovation before a full commitment, observability of returns in the community, communication channels, similar characteristics of the users in the group, reinvention pace of innovation, the spillover in the social network, existence of opinion leaders in the community, compatibility of the innovation with the existing technologies, technical infrastructure (Cain and Mittman 2002). These ten dimensions are in parallel with the Roger’s diffusion theory and S-curve model. Also, the shareholders’ adoption willingness is highly important as it is implied in these dimensions. Shareholders of the healthcare supply chain related to technology adoption can be defined as: The policy makers and regulators, the supply chain community, the payer such as national insurance institution or other insurers who decides payments on treatments, the provider institution such as hospital, the patient, the vendor company that run the research and development activities.
The effect of new technologies on the society is positive in general. Yet, its effect on workforce can be sometimes seen as a threat. The same applies to healthcare supply chain community. For example, the use of AI in administrative issues can increase efficiency in healthcare system because a nurse in US spends almost 25% of the worktime on such activities (Commins 2010). However, AI is expected to cause a substantial displacement of the workforce. A Deloitte LLP report in 2015 in collaboration with Oxford Marin Institute suggest that 35% of jobs will be automated in the next 20 years (Deloitte LLP 2015). So, it is not wrong to expect that a group in the healthcare supply chain community can be hesitant to accept the implementation of AI techniques.
2.3 Research gaps
Although there exist a few studies in analyzing the diffusion of AI in practice (Almaiah et al. 2022; Gardas 2022; Kumar et al. 2023a), the literature is open to multidimensional comprehensive studies in testing the successful implementation of AI technologies in different countries and in different industries. This study aims to use a multi-criteria decision-making method to analyze the model in the study. Then, a case study is used to test the method and the model.
3 Problem definition
In the case study, Turkiye’s healthcare supply chain is taken into consideration. Turkiye is one of the fast-growing emerging economies in developing world. The healthcare industry’s share in Turkish economy is accelerated in the recent years as the industry grows with its services that lead growing health tourism. Turkish government is ambitus in technology adoption with growing subsidies provided to the organizations in health, defense and automotive industry (Isik and Tokgoz 2022). Therefore, healthcare industry in Turkiye is an interesting case to study especially in supply chain management. The implementation of AI in supply chain and administration is relatively higher in compared to other uses. The public administration system e-Pulse Healthcare System is publicly financed AI-based system which is used by more than 10 million. Turkiye which is a highly populated country of almost 85 million has a general healthcare system and insurance covering all citizens. Thus, further use of AI in the public sector is in the future prospects of the authorities. Both in public and private healthcare sector in Turkiye, expert systems, genetic algorithm, fuzzy logic and artificial neural networks are major AI methods used (Canbolat and Toker 2021). Especially, after the COVID-19 break, the healthcare workforce of Turkiye was proven its sufficiency and quality. Yet, efficiency can be improved through implementation of AI technologies to reallocate the resources and workforce deployment. Obviously, Turkish healthcare system could get full advantages of AI implementation. However, some obstacles can prevent the diffusion process. The paper aim to find out these barriers and obstacles in the process. So that a smooth and quick transformation process can follow the successful implementation of AI technologies. Experts from the field are questioned for the factors listed in the developed model. The importance of factors is tested with the novel method that is created for this complex analysis.
3.1 Identification of the factors in the diffusion process of AI
The literature review provides the necessary dimensions and the factors that should be taken into consideration in analyzing the diffusion of AI to develop a resilient healthcare supply chain. The model of this study follows the diffusion of innovation theory by Rogers (Rogers 2010) and some models derived from the theory. Therefore, the model in the current study is based on four dimensions: technical infrastructure (MC1), business environment (MC2), macroeconomic system (MC3), social acceptance (MC4). The model evaluates 22 factors (Kumar et al. 2023a, b) that may influence diffusion of AI in healthcare supply chain management in each dimension. The dimensions and factors are explained and evidence from literature is provided below.
(1) MC1: Technical Infrastructure:
C1: Technology intensity: It refers to the availability and quality of technological requirements such as hardware or software (Cannavale et al. 2022; Bleher and Braun 2022; Perera et al. 2023; Sisodia and Jindal 2021).
C2: Observability: Observability of the technology is useful to use the network externality in the community. It creates stronger communication as the use of technology is observed and interchangeably realized (Cain and Mittman 2002; Uraikul et al. 2007; Almaiah et al 2022).
C3: Trialability: Being able to try the new technology before full adoption let adopters to test the activities. Tests increases the efficiency of the systems for later adoption (Sun et al. 2020; Cain and Mittman 2002).
C4: Expected returns: It motivates the adopters to meet requirements of adoption process (Sun et al. 2020; Cain and Mittman 2002; Damoah et al. 2021).
C5: Data reliability and sustainability: Reliability and sustainability of data is a major concern for adopters in adoption process. Both for persuading the patients to use the systems and to be able trust on the system efficiency (Cain and Mittman 2002; Damoah et al. 2021; Ahmad et al. 2021).
(2) MC2: Business Environment
C6: Firm size and structure: The firm size is important to issue the financial needs, dealing with the potential risks and efficiently managing human capital resources (Kinkel et al. 2022; Kwon et al. 2016; Kaminski 2011; Sun et al. 2020).
C7: Firm agility: It refers to the responsiveness of firm to the dynamic business environment. The firm’s ability to adapt to changes and market uncertainties increases the success rate of technology adaptation (Bai et al. 2023; Yang et al. 2015).
C8: Investment capacity: Being independent of firm size, firms’ in-house investment creation or their ability to find required financial resources is highly effective in their technology adaptation decision and the success of the process (Gardas 2022; Correa et al. 2010).
C9: Business networks: Possible coalitions of firms are determined through the structure of business network. As the probability of alignments among firms increases, they can tolerate costs of adoption of new technologies in the process (Babu and Weber 2019). Moreover, the existence of communication networks can increase the possibility of strategic alliances making firms stronger against market uncertainties (Jatoba et al. 2022).
C10: Opinion leaders in the business: It refers to the existence of reliable leader firms, organizations or individuals such as managers or scientists who are influential on the adopters so that adopters can follow their lead in the technology adaptation process (Cain and Mittman 2002; Rogers 2010; Gardas 2022).
C11: Internal and External Economies of Scale: Economies of scale refers to decreasing average costs as the production increases. The availability of internal economies of scale provides firms a competitive advantage while external economies of scale provide the whole industry competitive advantage. In both case, technology adoption becomes easier for the adopter who have already competitive advantage relatively to others (Foster and Rosenzweig 2010; Smidt and Jokonya 2022).
C12: Customs and norms in the Business: It refers to the values that the adopters share, how they interact and collaborate and coordinate. The pace of diffusion is highly related to the acceptance of the new technology based on how it can serve to the values and norms shared in the business environment (Rogers 2010; Kaminski 2011; Gardas 2022).
(3) MC3: Macroeconomic System
C13: Government support and policies: The subsidies or supports provided by the government or policy framework that is driven to accelerate the technology diffusion has positive effects on the process (Almaiah et al. 2022; Parente and Prescott 1994; Sun and Medaglia 2019).
C14: Industry-specific pressure: Healthcare supply chain is highly effective in healthcare costs and the success of the services. Therefore, secured supply resilience is demanded by patients, payers and physicians and managers of the organizations. The adoption of new technologies is subject to demand and other industry-specific factors (Mathur et al. 2018; Pournader et al. 2021; Kwon et al. 2016).
C15: Peer pressure: As the competition in the industry cut throats, the adoption of new technologies can be enforced especially in the supply chain dimension not to be departed from the rest of the industry (Mathur et al. 2018; Pournader et al. 2021; Almaiah et al. 2022).
C16: Inclusiveness: The technological adoption process affects shareholders of the industry in different ways. With an inclusive approach, technology adopters include the shareholders and partners in a collaborative way to the adaptation process. Otherwise, strong objections from different parts of the community can slow down the pace of diffusion (Isik et al. 2023; Rogers 2010; Kaminski 2011).
C17: Environmental Concerns and Actions: The sustainability issues and climate actions taken by the regulatory authorities enforce firms and organizations to take drastic measures in many dimensions including adoption of new technologies in running the business. It creates an interactive relation among shareholders as well as vertical integrations (Isik et al. 2023; Peltier et al. 2012; Kwon et al. 2016).
(4) MC4: Social Acceptance
C18: Workforce transformation: It refers to the changing labor demand of the industry with the adoption of new technologies. Some jobs destructed as AI substitutes the human work, whereas new jobs are created to use and improve the new techniques and methods (Deloitte LLP 2015; Commins 2010).
C19: Takeoff phase: It refers to the starting phase of the implementation. How much the community is ready to meet and try a new technology is important for the rest of the process (Rogers 2010; Geroski 2000).
C20: Adopters’ acceptance rate: The adopters in the community can have different adaptation skills to in continuously using the new practices. As the consumer of the technology is more open to use of the new ways of doing the business, the adoption pace accelerates (Rogers 2010; Geroski 2000).
C21: Human capital: The know-how of the new technology is important for the adaptation process. As the workforce in the industry has the required skills and talents or is ready to get these skills and talents, the pace of adoption accelerates (Gardas 2022; Geroski 2000; Rogers 2010).
C22: Future prospects on the use of AI: The successful implementation of adoption of new technologies is highly correlated with the future plans of adopters in further use of these technologies. Having such plans is the proof of successful implementation and integration of the new technologies with the existing ones (Gardas 2022; Geroski 2000; Rogers 2010).
4 Methodology
In this section, the preliminaries and basic notations of the used model including fuzzy Aczel–Alsina norms/conorms are presented.
4.1 Aczel–Alsina norms
This section provided the preliminaries and basic operations of Aczel–Alsina norms under triangular fuzzy numbers (TRNs).
Definition 1
(Aczel and Alsina 1982): Suppose that \(\wp_{1}\) and \(\wp_{2}\) are real numbers, then the Aczel–Alsina T-norm and T-conorm can be expressed by:
where \({\mathbb{R}}^{\zeta }\) and \({\mathbb{R}}_{c}^{\zeta }\) denote T-norm and T-conorm, respectively, and \((\wp_{1} ,\wp_{2} ) \in \left[ {0,1} \right]\), \(\zeta \in \left( {0,\infty } \right]\).
Definition 2
Let's suppose that \(\widetilde{\wp }_{1} = \left( {\wp_{1}^{(\alpha )} ,\wp_{1}^{(\beta )} ,\wp_{1}^{(\pi )} } \right)\) and \(\widetilde{\wp }_{2} = \left( {\wp_{2}^{(\alpha )} ,\wp_{2}^{(\beta )} ,\wp_{2}^{(\pi )} } \right)\) are TRNs. Additionally, let it be \(\eta ,\zeta \in \left( {0,\infty } \right]\) i \(f\left( {\wp_{i} } \right) = {{\wp_{i} } \mathord{\left/ {\vphantom {{\wp_{i} } {\sum\nolimits_{i = 1}^{2} {\wp_{i} } }}} \right. \kern-0pt} {\sum\nolimits_{i = 1}^{2} {\wp_{i} } }}\), then the arithmetic operators can be defined as follows:
(1) Addition "\(\oplus\)"
(2) Multiplication "\(\otimes\)"
(3) Scalar multiplication
(4) Power
To better understand arithmetic operations with the fuzzy Aczel–Alsina norm, additional basic settings are expressed by:
-
(1)
\(\widetilde{\wp }_{1} \oplus \widetilde{\wp }_{2} = \widetilde{\wp }_{2} \oplus \widetilde{\wp }_{1}\) and \(\widetilde{\wp }_{1} \otimes \widetilde{\wp }_{2} = \widetilde{\wp }_{2} \otimes \widetilde{\wp }_{1}\);
-
(2)
\(\eta \left( {\widetilde{\wp }_{1} \oplus \widetilde{\wp }_{2} } \right) = \eta \widetilde{\wp }_{1} \oplus \eta \widetilde{\wp }_{2}\) and \(\left( {\eta_{1} + \eta_{2} } \right)\widetilde{\wp }_{1} = \eta_{1} \widetilde{\wp }_{1} \oplus \eta_{2} \widetilde{\wp }_{1}\);
-
(3)
\(\left( {\widetilde{\wp }_{1} \otimes \widetilde{\wp }_{2} } \right)^{\eta } = \widetilde{\wp }_{1}^{\eta } \otimes \widetilde{\wp }_{2}^{\eta }\) and \(\widetilde{\wp }_{1}^{{\eta_{1} }} \otimes \widetilde{\wp }_{1}^{{\eta_{2} }} = \widetilde{\wp }_{1}^{{\left( {\eta_{1} + \eta_{2} } \right)}}\).
4.2 Determining criteria weights—fuzzy Aczel–Alsina function-based LMAW
This section presents the steps of fuzzy Aczel–Alsina LMAW model (Deveci et al. 2023). The concept of the traditional LMAW is developed by Pamucar et al. (2021) and the Alczel-Alsina T-norm and T-conorms is introduced by Aczel and Alsina (1982). Alczel-Alsina norms have been introduced to overcome the shortcomings of the min–max operators, which are generally implemented to fuzzy sets (Zadeh 1965). The advantages of Alczel-Alsina operators are as follows: (i) the determination of the result by only one variable, which is the essential feature of the min–max operator due to all its axiomatic properties, is eliminated; (ii) min–max operators are non-analytical and their second derivatives are not continuous, which is eliminated by the application of the Alczel-Alsina operator (Pamucar et al. 2021; Deveci et al. 2023). The steps of fuzzy Aczel–Alsina's are given by:
Step 1 Expressing the priority vector. Suppose that \(s\) experts participate and it is 1 ≤ r ≤ s, then we a priority vector (\({\mathbb{Q}}\)) can be expressed for each expert as follows:
where \(\widetilde{\chi }_{{A_{1} }}^{r} = \left( {\chi_{{A_{1} }}^{r(\alpha )} ,\chi_{{A_{1} }}^{r(\beta )} ,\chi_{{A_{1} }}^{r(\pi )} } \right)\) denotes the expert’s preference for criterion A1 and it is stated based on a linguistic scale.
Step 2 Definition of the absolute anti-ideal point (\(\theta\)) (AAIP) using Eq. (8).
where \(\widetilde{\chi }_{{A_{j} }}^{r}\) denotes the element of the vector.
Step 3 Expressing a ratio vector. It shows the relationship between the criteria within the priority vector. The elements of the ratio vector \({\mathbb{C}}^{r} = \left( {\widetilde{\psi }_{{A_{1} }}^{r} ,\widetilde{\psi }_{{A_{2} }}^{r} ,..,\widetilde{\psi }_{{A_{n} }}^{r} } \right)\) are described by Eq. (9):
where \(\widetilde{\chi }_{{A_{j} }}^{r} \in {\mathbb{Q}}^{r}\), \(\widetilde{\chi }_{{A_{1} }}^{r} = \left( {\chi_{{A_{1} }}^{r(\alpha )} ,\chi_{{A_{1} }}^{r(\beta )} ,\chi_{{A_{1} }}^{r(\pi )} } \right)\) and \(1 \le r \le h\).
Step 4 To get the score values, we use Eqs. (10) and (11) as follows:
We obtain the element \(\widetilde{\delta }_{j}^{r} = \left( {\delta_{j}^{r(\alpha )} ,\delta_{j}^{r(\beta )} ,\delta_{j}^{r(\pi )} } \right)\) by applying Eq. (11).
where \(\zeta > 0\), and \(f\left( {\widetilde{\psi }_{j}^{r} } \right) = \widetilde{\psi }_{j}^{r} /\sum\limits_{j = 1}^{n} {\widetilde{\psi }_{j}^{r} }\).
The aggregated coefficients are expressed using Eq. (12).
where \(\tau > 0\), \(f\left( {\widetilde{\vartheta }_{j(k)} } \right) = \widetilde{\vartheta }_{j(k)} /\sum\limits_{k = 1}^{h} {\widetilde{\vartheta }_{j(k)} }\), and h denotes a number of experts.
5 Experimental results
In this section, the experimental results obtained are presented. The flowchart of the used model is shown in Fig. 1. The used model is proposed by Deveci et al. (2023). A questionnaire is conducted to evaluate the criteria. Each criterion is scored by the experts. The questionnaires are sent to three experts. The results are gathered.
Twenty-two criteria \(A_{j} (j = 1,2, \ldots ,22)\) are evaluated by a set of experts \(s_{l} \left( {l = 1,2,3} \right)\) with the help of Table 1 which presents the linguistic scale to obtain the experts’ opinions.
Three experts participated in the survey and provided their opinions on the importance of the criteria. The assessments of the criteria are reported in Table 2.
Step 1 Three decision-makers (experts) provided their preferences within the fuzzy priority vector with the help of Table 1. The significance of the criteria is given in Table 3.
Steps 2 and 3 Using Eq. (8) and expressing the relationship vector, the value of AAIP \(\varepsilon = (0.4,0.5,0.6)\) is integrated. Later, AAIP is implemented to obtain the ratio vector by Eq. (9). The results are given in Table 4.
For example, the ratio vector for C1 is calculated by Eq. (9) as follows:
Step 4 The final vector of weighting coefficients is calculated by Eqs. (10)–(11) using Table 4. The score values and rank of the criteria are presented in Table 5.
The score values of the AI success factors are illustrated in Fig. 2 and reported in Table 5. It can be seen that the technology intensity (C1), trialability (C3), and government support and policies have most important AI success factors. It is also seen that the internal and external economics of scale (C11) and the opinion leaders in the business (C10) have the least impact.
For example, C1 can be calculated as follows:
The remaining weights from Table 5 are calculated similarly.
6 Results and discussion
The results of testing the model reveal that among eleven success factors, technology intensity, trialability, and government support and policies are the most important ones. It is also seen that the internal and external economics of scale and the opinion leaders in the business have the least impact. These results are highly correlated with the technology diffusion theories. The technical infrastructure is significantly important in the diffusion phase. The existing technologies and their intensity prepare the users for the new technologies. The trialability of the new technology prevent the avoidance of the users due to their potential risk averse behaviors. It is also financially important to try and test the new technology before adopting it for good. Also, especially in the developing countries where the private sector may not ready to take the financial burden of the use of new technologies, governments’ push plays a crucial role in the adoption process. Governments can invest on the infrastructure that is required but cannot be provisioned by private sector. The importance of the peer pressure is significant in the results. Therefore, existing networks can provide a background for the spillover of technology among business partners.
Results show that governments’ role in the diffusion process is significant. A big push that supports the existing technical infrastructure as well as social and business networks can speed up the diffusion process of AI technologies in supply chain management of healthcare industries. Therefore, while the governments are expected to start a big push, the business partners and shareholders are expected to use the opportunities created by the new technologies as they became more inclusive and uplifting for the adopters.
7 Conclusion
The aim of this study is to investigate the barriers and obstacles in the healthcare supply chain process. Therefore, a smooth and quick transformation process can follow the successful implementation of AI technologies. In this study, twenty-two criteria are examined and determined the importance of the AI success factors with the help of fuzzy Aczel–Alsina LMAW model. The used model assesses 22 factors that can influence diffusion of AI in healthcare supply chain management in each dimension. According to the results, the most effective criteria are the technology intensity (C1), trialability (C3), and government support and policies, respectively, while the most ineffective criteria are the internal and external economics of scale (C11) and the opinion leaders in the business (C10).
The study has some limitations. Some biases of the survey results may still exist, one of which is due to insufficient experts and other criteria. In future studies, type-2 neutrosophic fuzzy sets can be used to capture the uncertainty of the subjective judgments of experts. Also, fuzzy Einstein or dombi operators can be implemented to provide the flexibility in decision-making. These operators can provide some important advantages.
Data availability
Enquiries about data availability should be directed to the authors.
References
Abbas M, Asghar MW, Guo Y (2022) Decision-making analysis of minimizing the death rate due to covid-19 by using q-rung orthopair fuzzy soft bonferroni mean operator. J Fuzzy Ext Appl 3(3):231–248
Aczel J, Alsina C (1982) Characterization of some classes of quasilinear functions with applications to triangular norms and to synthesizing judgements. Aequ Math 25(1):313–315
Adak AK, Kumar D (2023) Spherical distance measurement method for solving MCDM problembs under Pythagorean fuzzy environment. J Fuzzy Exte Appl 4(1):28–39. https://doi.org/10.22105/jfea.2022.351677.1224
Ahmad T, Zhang D, Huang C, Zhang H, Dai N, Song Y, Chen H (2021) Artificial intelligence in sustainable energy industry: status Quo, challenges and opportunities. J Clean Prod 289:125834
Alavi S, Zeinalnezhad M, Mousavi E (2022) Prioritisation of GPM activities from lean-agile-resilience perspective using fuzzy analytic hierarchy process. J Fuzzy Ext Appl 3(3):263–278
Ali O, Abdelbaki W, Shrestha A, Elbasi E, Alryalat MAA, Dwivedi YK (2023) A systematic literature review of artificial intelligence in the healthcare sector: benefits, challenges, methodologies, and functionalities. J Innov Knowl 8(1):100333
Almaiah MA, Alfaisal R, Salloum SA, Hajjej F, Shishakly R, Lutfi A, Al-Maroof RS (2022) Measuring institutions’ adoption of artificial intelligence applications in online learning environments: integrating the innovation diffusion theory with technology adoption rate. Electronics 11(20):3291
Arji G, Ahmadi H, Avazpoor P, Hemmat M (2023) Identifying resilience strategies for disruption management in the healthcare supply chain during COVID-19 by digital innovations: a systematic literature review. Inform Med Unlocked 101199
Asadi M, Zolfani SH, Pamucar D, Salimi J, Saberi S (2023) The appropriation of blockchain implementation in the supply chain of SMES based on fuzzy LMAW. Eng Appl Artif Intell 123:106169
Babu A, Weber C (2019) Strategic alliances for technology adoption: alliances and partnerships for blockchain adoption. In: 2019 Portland international conference on management of engineering and technology (PICMET). IEEE, pp 1–7
Bag S, Dhamija P, Singh RK, Rahman MS, Sreedharan VR (2023) Big data analytics and artificial intelligence technologies based collaborative platform empowering absorptive capacity in health care supply chain: an empirical study. J Bus Res 154:113315
Bai B, Um KH, Lee H (2023) The strategic role of firm agility in the relationship between IT capability and firm performance under the COVID-19 outbreak. J Bus Ind Mark 38(5):1041–1054
Barry A, Thrift N (2007) Gabriel tarde: imitation, invention and economy. Econ Soc 36(4):509–525
Baryannis G, Validi S, Dani S, Antoniou G (2019) Supply chain risk management and artificial intelligence: state of the art and future research directions. Int J Prod Res 57(7):2179–2202
Belhadi A, Kamble S, Fosso Wamba S, Queiroz MM (2022) Building supply-chain resilience: an artificial intelligence-based technique and decision-making framework. Int J Prod Res 60(14):4487–4507
Benzidia S, Makaoui N, Bentahar O (2021) The impact of big data analytics and artificial intelligence on green supply chain process integration and hospital environmental performance. Technol Forecast Soc Chang 165:120557
Bhatia G, Lane C, Wain A (2013) Building resilience in supply chains. WEF report. https://www3.weforum.org/docs/WEF_RRN_MO_BuildingResilienceSupplyChains_Report_2013.pdf
Bleher H, Braun M (2022) Diffused responsibility: attributions of responsibility in the use of AI-driven clinical decision support systems. AI Ethics 2(4):747–761
Božanić D, Pamučar D, Milić A, Marinković D, Komazec N (2022) Modification of the logarithm methodology of additive weights (LMAW) by a triangular fuzzy number and its application in multi-criteria decision making. Axioms 11(3):89
Brenton P, Ferrantino M, Maliszewska M (2022) Stronger value chains, not reshoring, are needed after the COVID-19 shock. https://blogs.worldbank.org/trade/stronger-value-chains-not-reshoring-are-needed-after-covid-19-shock
Bughin J, Hazan E, Ramaswamy S, Chui M, Allas T, Dahlstrom P, Trench M (2017) Artificial intelligence: the next digital frontier? McKinsey&Company. McKinsey Global Institute. https://apo.org.au/node/210501
Cain M, Mittman R (2002) Diffusion of innovation in health care. https://www.professorcarlson.net/c4dcourse/module_2/m2_unit2/m2_u2_optional/M2U2_Cain_DiffusionOfInnovationInHealthCare.pdf
Canbolat SN, Toker K (2021) Artificial intelligence in healthcare sector: practices in the Turkey and world. https://www.researchgate.net/publication/354695158_Artificial_Intelligence_in_Healthcare_Sector_Practices_in_the_Turkey_and_World
Cannavale C, Esempio Tammaro A, Leone D, Schiavone F (2022) Innovation adoption in inter-organizational healthcare networks–the role of artificial intelligence. Eur J Innov Manag 25(6):758–774
Chatterjee S, Rana NP, Dwivedi YK, Baabdullah AM (2021) Understanding AI adoption in manufacturing and production firms using an integrated TAM-TOE model. Technol Forecast Soc Chang 170:120880
Commins J (2010) Nurses say distractions cut bedside time by 25%. Healthleaders. https://www.healthleadersmedia.com/nursing/nurses-say-distractions-cut-bedside-time-25
Correa PG, Fernandes AM, Uregian CJ (2010) Technology adoption and the investment climate: firm-level evidence for Eastern Europe and Central Asia. World Bank Econ Rev 24(1):121–147
Cubric M (2020) Drivers, barriers and social considerations for AI adoption in business and management: a tertiary study. Technol Soc 62:101257
Cubukcu C, Cantekin C (2022) Using a combined fuzzy-AHP and topsis decision model for selecting the best firewall alternative. J Fuzzy Ext Appl 3(3):192–200
Damoah IS, Ayakwah A, Tingbani I (2021) Artificial intelligence (AI)-enhanced medical drones in the healthcare supply chain (HSC) for sustainability development: a case study. J Clean Prod 328:129598
Davenport T, Kalakota R (2019) The potential for artificial intelligence in healthcare. Future Healthc J 6(2):94
Deloitte LLP (Firm) (2015) From brawn to brains: the impact of technology on jobs in the UK
Deveci M, Gokasar I, Pamucar D, Chen Y, Coffman DM (2023) Sustainable e-scooter parking operation in urban areas using fuzzy Dombi based RAFSI model. Sustain Cities Soc 91:104426
Dooner R (2014) How supply chain management can help to control health-care costs. CSCMP’s Supply Chain Q 8(3):50–53
Dora M, Kumar A, Mangla SK, Pant A, Kamal MM (2022) Critical success factors influencing artificial intelligence adoption in food supply chains. Int J Prod Res 60(14):4621–4640
Dwivedi YK, Hughes L, Ismagilova E, Aarts G, Coombs C, Crick T, Williams MD (2021) Artificial intelligence (AI): multidisciplinary perspectives on emerging challenges, opportunities, and agenda for research, practice and policy. Int J Inf Manag 57:101994
Enholm IM, Papagiannidis E, Mikalef P, Krogstie J (2022) Artificial intelligence and business value: a literature review. Inf Syst Front 24(5):1709–1734
Eskandari-Khanghahi M, Tavakkoli-Moghaddam R, Taleizadeh AA, Amin SH (2018) Designing and optimizing a sustainable supply chain network for a blood platelet bank under uncertainty. Eng Appl Artif Intell 71:236–250
Fleron A, Krishna A, Singhal S (2022) The gathering storm: the the transformative impact of inflation on the healthcare sector. https://www.mckinsey.com/industries/healthcare/our-insights/the-gathering-storm-the-transformative-impact-of-inflation-on-the-healthcare-sector
Foster AD, Rosenzweig MR (2010) Microeconomics of technology adoption. Annu Rev Econ 2(1):395–424
Fountaine T, McCarthy B, Saleh T (2019) Building the AI-powered organization. Harv Bus Rev 97(4):62–73
Gardas BB (2022) Organizational hindrances to healthcare 40 adoption: an multi-criteria decision analysis framework. J Multi-Criteria Decis Anal 29(1–2):186–195
Geissbauer R, Schrauf S, Berttram P, Cheraghi F (2017) Digital factories 2020. Shaping the future of manufacturing. Published by PricewaterhouseCoopers GmbH Wirtschaftsprüfungsgesellschaft (PwC). https://www.pwc.de/de/digitale-transformation/digital-factories-2020-shaping-the-future-of-manufacturing.pdf
Geroski PA (2000) Models of technology diffusion. Res Policy 29(4–5):603–625
Goodarzian F, Taleizadeh AA, Ghasemi P, Abraham A (2021) An integrated sustainable medical supply chain network during COVID-19. Eng Appl Artif Intell 100:104188
Haghjoo N, Tavakkoli-Moghaddam R, Shahmoradi-Moghadam H, Rahimi Y (2020) Reliable blood supply chain network design with facility disruption: a real-world application. Eng Appl Artif Intell 90:103493
Isik M, Aktürk AC (2022) Economic and societal inequalities in the time of COVID-19. In: Emerging trends and insights on economic inequality in the wake of global crises. IGI Global, pp 159–179
Isik M, Tokgoz AC (2022) Savunma Harcamaları ve Ekonomik Büyüme: Türkiye İha Piyasası Üzerine Bir Vaka Analizi In Uluslararası Ticarette Güncel Gelişmeler. Hiperlink, pp 35–66
Isik M, Akay GH, Arslan RN (2023) From industry 4.0 to industry 5.0: the role of responsible research and innovation. In: Implications of industry 5.0 on environmental sustainability. IGI Global, pp 1–24
Jatobá MN, Franco M, Rodrigues M (2022) The role of communication between partners in the process of strategic alliances: a systematic literature review. J Bus Ind Mark (ahead-of-print)
Jiang F, Jiang Y, Zhi H, Dong Y, Li H, Ma S, Wang Y (2017) Artificial intelligence in healthcare: past, present and future. Stroke Vasc Neurol 2(4)
Jiang B, Rigobon D, Rigobon R (2021) From just-in-time, to just-in-case, to just-in-worst-case: simple models of a global supply chain under uncertain aggregate shocks. IMF Econ Rev 1–44
Kaminski J (2011) Diffusion of innovation theory. Can J Nurs Inform 6(2):1–6
Kamran MA, Kia R, Goodarzian F, Ghasemi P (2023) A new vaccine supply chain network under COVID-19 conditions considering system dynamic: artificial intelligence algorithms. Socio-Econ Plan Sci 85:101378
Karatas M, Eriskin L, Deveci M, Pamucar D, Garg H (2022) Big data for healthcare industry 4.0: applications, challenges and future perspectives. Expert Syst Appl 116912
Khan MR, Ullah K, Khan Q (2023) Multi-attribute decision-making using Archimedean aggregation operator in T-spherical fuzzy environment. Rep Mech Eng 4(1):18–38
Kim M, Chai S (2016) Assessing the impact of business uncertainty on supply chain integration. Int J Logist Manag
Kinkel S, Baumgartner M, Cherubini E (2022) Prerequisites for the adoption of AI technologies in manufacturing–evidence from a worldwide sample of manufacturing companies. Technovation 110:102375
Kumar A, Mani V, Jain V, Gupta H, Venkatesh VG (2023a) Managing healthcare supply chain through artificial intelligence (AI): a study of critical success factors. Comput Ind Eng 175:108815
Kumar P, Chauhan S, Awasthi LK (2023b) Artificial intelligence in healthcare: review, ethics, trust challenges & future research directions. Eng Appl Artif Intell 120:105894
Kwon IWG, Kim SH, Martin DG (2016) Healthcare supply chain management; strategic areas for quality and financial improvement. Technol Forecast Soc Chang 113:422–428
Lee J, Davari H, Singh J, Pandhare V (2018) Industrial Artificial Intelligence for industry 4.0-based manufacturing systems. Manuf Lett 18:20–23
Li S, Ragu-Nathan B, Ragu-Nathan TS, Rao SS (2006) The impact of supply chain management practices on competitive advantage and organizational performance. Omega 34(2):107–124
Lundblad JP (2003) A review and critique of Rogers’ diffusion of innovation theory as it applies to organizations. Organ Dev J 21(4):50
Mathur B, Gupta S, Meena ML, Dangayach GS (2018) Healthcare supply chain management: literature review and some issues. J Adv Manag Res
Mosallanezhad B, Gholian-Jouybari F, Cárdenas-Barrón LE, Hajiaghaei-Keshteli M (2023) The IoT-enabled sustainable reverse supply chain for COVID-19 pandemic wastes (CPW). Eng Appl Artif Intell 120:105903
Nachtmann H, Pohl EA (2009) The state of healthcare logistics: cost and quality improvement opportunities. Center for Innovation in Healthcare Logistics, University of Arkansas
Naz F, Agrawal R, Kumar A, Gunasekaran A, Majumdar A, Luthra S (2022) Reviewing the applications of artificial intelligence in sustainable supply chains: exploring research propositions for future directions. Bus Strategy Environ 31(5):2400–2423
Oliver K, Kothari A, Mays N (2019) The dark side of coproduction: do the costs outweigh the benefits for health research?. Health Res Policy Syst 17(1):1–10
Ou CS, Liu FC, Hung YC, Yen DC (2010) A structural model of supply chain management on firm performance. Int J Oper Prod Manag
Pamucar D, Zizovic M, Biswas S, Bozanic D (2021) A new logarithm methodology of additive weights (LMAW) for multi-criteria decision-making: application in logistics. Facta Univ Ser Mech Eng. https://doi.org/10.22190/FUME210214031P
Pamučar D, Durán-Romero G, Yazdani M, López AM (2023) A decision analysis model for smart mobility system development under circular economy approach. Socio-Econ Plan Sci 86:101474
Parente SL, Prescott EC (1994) Barriers to technology adoption and development. J Polit Econ 102(2):298–321
Peltier JW, Zhao Y, Schibrowsky JA (2012) Technology adoption by small businesses: an exploratory study of the interrelationships of owner and environmental factors. Int Small Bus J 30(4):406–431
Perera YS, Ratnaweera DAAC, Dasanayaka CH, Abeykoon C (2023) The role of artificial intelligence-driven soft sensors in advanced sustainable process industries: a critical review. Eng Appl Artif Intell 121:105988
Pournader M, Ghaderi H, Hassanzadegan A, Fahimnia B (2021) Artificial intelligence applications in supply chain management. Int J Prod Econ 241:108250
Rakhmangulov A, Osintsev N, Muravev D, Legusov A (2019) An optimal management model for empty freight railcars in transport nodes. Oper Res Eng Sci Theory Appl 2(1):51–71
Ransbotham S, Kiron D, Gerbert P, Reeves M (2017) Reshaping business with artificial intelligence: closing the gap between ambition and action. MIT Sloan Manag Rev 59(1)
Rogers EM (2010) Diffusion of innovations. Simon and Schuster
Roh J, Hong P, Min H (2014) Implementation of a responsive supply chain strategy in global complexity: the case of manufacturing firms. Int J Prod Econ 147:198–210
Ryan B, Gross NC (1943) The diffusion of hybrid seed corn in two Iowa communities. Rural Sociol 8(1):15
Sisodia A, Jindal R (2021) A meta-analysis of industry 4.0 design principles applied in the health sector. Eng Appl Artif Intell 104:104377
Smidt HJ, Jokonya O (2022) Factors affecting digital technology adoption by small-scale farmers in agriculture value chains (AVCs) in South Africa. Inf Technol Dev 28(3):558–584
Sun TQ, Medaglia R (2019) Mapping the challenges of Artificial Intelligence in the public sector: evidence from public healthcare. Gov Inf Q 36(2):368–383
Sun S, Hall DJ, Cegielski CG (2020) Organizational intention to adopt big data in the B2B context: an integrated view. Ind Mark Manag 86:109–121
Tešić D, Božanić D, Puška A, Milić A, Marinković D (2023) Development of the MCDM fuzzy LMAW-grey MARCOS model for selection of a dump truck. Rep Mech Eng 4(1):1–17
Thormundsson B (2022) Adoption rate of AI in global supply chain business 2022–2025. https://www.statista.com/statistics/1346717/ai-function-adoption-rates-business-supply-chains/
Tukamuhabwa BR, Stevenson M, Busby J, Zorzini M (2015) Supply chain resilience: definition, review and theoretical foundations for further study. Int J Prod Res 53(18):5592–5623
Uraikul V, Chan CW, Tontiwachwuthikul P (2007) Artificial intelligence for monitoring and supervisory control of process systems. Eng Appl Artif Intell 20(2):115–131
Waltersmann L, Kiemel S, Stuhlsatz J, Sauer A, Miehe R (2021) Artificial intelligence applications for increasing resource efficiency in manufacturing companies—a comprehensive review. Sustainability 13(12):6689
Wamba-Taguimdje SL, Fosso Wamba S, Kala Kamdjoug JR, Tchatchouang Wanko CE (2020) Influence of artificial intelligence (AI) on firm performance: the business value of AI-based transformation projects. Bus Process Manag J 26(7):1893–1924
Yang Z, Sun J, Zhang Y, Wang Y (2015) Understanding SaaS adoption from the perspective of organizational users: a tripod readiness model. Comput Hum Behav 45:254–264
Yi J, Zhang H, Mao J, Chen Y, Zhong H, Wang Y (2022) Review on the COVID-19 pandemic prevention and control system based on AI. Eng Appl Artif Intell 105184
Zadeh LA (1965) Fuzzy sets. Inf Control 8(1965):338–353
Acknowledgements
The authors did not receive any specific grant from funding agencies in the public, commercial, or non-profit sectors.
Funding
The authors have not disclosed any funding.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with animals performed by any of the authors.
Informed consent
Informed consent was obtained from all individual participants included in the study.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Deveci, M. Effective use of artificial intelligence in healthcare supply chain resilience using fuzzy decision-making model. Soft Comput (2023). https://doi.org/10.1007/s00500-023-08906-2
Accepted:
Published:
DOI: https://doi.org/10.1007/s00500-023-08906-2