Skip to main content
Log in

Physiological impacts on construction workers under extremely hot and humid weather

  • Original Article
  • Published:
International Archives of Occupational and Environmental Health Aims and scope Submit manuscript

Abstract

Purpose

Construction worker health and safety is a primary concern for construction companies and researchers. Arabian Gulf region, like Saudi Arabia, has been experiencing extremely hot and humid (EHH) weather, which directly affects construction workers’ health and safety. This study aims to address the problem of EHH weather conditions and their impacts on construction workers’ physiological status.

Methods

This study assesses the impacts of EHH weather on construction workers’ physiological status through the measurement of workers’ physical body parameters (age, height, and weight); type of activities; and assigned tasks. Thirty-five multinational workers participated in the measurements, which were conducted in real construction site conditions A quantitative analysis was then applied to quantify the physiological impacts of the weather conditions. Several hypotheses were tested to identify the significant impacts of individual and working aspects on the workers’ physiological responses.

Results and conclusion

The results provide empirical evidence that the recorded Heart Rate (HR) exceeded the acceptable physiological zones for construction workers exposed to extremely hot and humid weather conditions. Physical body parameters, work activities, and worker status significantly influence construction workers’ physiological responses. This study recommends adopting a continuous monitoring approach as an early warning system under extremely hot and humid weather conditions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Acharya P, Boggess B, Zhang K (2018) Assessing heat stress and health among construction workers in a changing climate: a review. Int J Environ Res Public Health 15(2):247

    Article  Google Scholar 

  • Ahn CR, Lee S, Sun C, Jebelli H, Yang K, Choi B (2019) Wearable sensing technology applications in construction safety and health. J Constr Eng Manag 145(11):03119007

    Article  Google Scholar 

  • Alam MM, Hamida EB (2014) Advances in wearable sensor technology and its applications in mobile workforces health monitoring and safety management. Society of Petroleum Engineers - SPE Middle East Health, Safety, Environment and Sustainable Development Conference and Exhibition, MEHSE 2014, 41:561–574

  • Alasamri H, Chrisp MT, Bowles G (2012) A framework for enhancing and Improving the safety culture on Saudi construction sites. In: Association of Researchers in Construction Management, ARCOM 2012—Proceedings of the 28th Annual Conference 1(September):475–485

  • Al-Haadir S, Panuwatwanich K (2011) Critical success factors for safety program implementation among construction companies in Saudi Arabia. Proc Eng 14:148–155

    Article  Google Scholar 

  • Al-Haadir S, Panuwatwanich K, Stewart R (2013) Developing a model of construction safety in Saudi Arabia. In: Proceedings of the 13th East Asia-Pacific conference on structural engineering and construction, EASEC 2013

  • Al-Maamary HMS, Kazem HA, Chaichan MT (2017) Climate change: the game changer in the Gulf Cooperation Council Region. Renew Sustain Energy Rev 76(March):555–576

    Article  Google Scholar 

  • Alshebani MN, Wedawatta G (2014) Making the construction industry resilient to extreme weather: lessons from construction in hot weather conditions. Proc Econ Finance 18(September):635–642

    Article  Google Scholar 

  • Anderson JJ, Felson TD (1988) Factor associated with osteorarthiritis of the knee in the first national health and nutririon examination survey (hanes I). Am J Epidemiol 128(1):179–189

    Article  CAS  Google Scholar 

  • Antwi-Afari MF, Li H, Wong JKW, Oladinrin OT, Ge JX, Seo JO, Wong AYL (2019) Sensing and warning-based technology applications to improve occupational health and safety in the construction industry: a literature review. Eng Constr Archit Manag 26(8):1534–1552

    Article  Google Scholar 

  • Bates GP, Schneider J (2008) Hydration status and physiological workload of UAE construction workers: a prospective longitudinal observational study. J Occup Med Toxicol 3(1):1–10

    Article  Google Scholar 

  • Bates GP, Miller VS, Joubert DM (2010) Hydration status of expatriate manual workers during summer in the Middle East. Ann Occup Hyg 54(2):137–143

    Google Scholar 

  • BioKlima—Universal tool for bioclimatic and thermophysiological studies (2021) https://www.igipz.pan.pl/bioklima.html

  • Brake DJ, Bates GP (2002) Deep body core temperatures in industrial workers under thermal stress. J Occup Environ Med 44(2):125–135

    Article  Google Scholar 

  • Byrne NM, Hills AP, Hunter GR, Weinsier RL, Schutz Y (2005) Metabolic equivalent: one size does not fit all. J Appl Physiol 99(3):1112–1119

    Article  Google Scholar 

  • Chamsi-Pasha H, Ahmed WH (2004) The effect of fasting in Ramadan on patients with heart disease. Saudi Med J 25(1):47–51

    Google Scholar 

  • Chan APC, Yang Y (2016) Practical on-site measurement of heat strain with the use of a perceptual strain index. Int Arch Occup Environ Health 89(2):299–306

    Article  Google Scholar 

  • Chan APC, Yam MCH, Chung JWY, Yi W (2012a) Developing a heat stress model for construction workers. J Facil Manag 10(1):59–74

    Article  Google Scholar 

  • Chan APC, Yi W, Wong DP, Yam MCH, Chan DWM (2012b) Determining an optimal recovery time for construction rebar workers after working to exhaustion in a hot and humid environment. Build Environ 58:163–171

    Article  Google Scholar 

  • Chan APC, Yi W, Chan DWM, Wong DP (2013) Using the thermal work limit as an environmental determinant of heat stress for construction workers. J Manag Eng 29(4):414–423

    Article  Google Scholar 

  • Dewanti L, Watanabe C, Sulistiawati, Ohtsuka R (2006) Unexpected changes in blood pressure and hematological parameters among fasting and nonfasting workers during Ramadan in Indonesia. Eur J Clin Nutr 60(7):877–881

    Article  CAS  Google Scholar 

  • Gatti UC, Migliaccio GC, Bogus SM, Schneider S (2012) Using wearable physiological status monitors for analyzing the physical strain—productivity relationship for construction tasks. Comput Civil Eng 577–585

  • Gatti UC, Migliaccio GC, Bogus SM, Schneider S (2014a) An exploratory study of the relationship between construction workforce physical strain and task level productivity. Constr Manag Econ 32(6):548–564

    Article  Google Scholar 

  • Gatti UC, Schneider S, Migliaccio GC (2014b) Physiological condition monitoring of construction workers. Autom Constr 44:227–233

    Article  Google Scholar 

  • Grubbs FE, Beck G (1972) Extension of sample sizes and percentage points for significance tests of outlying observations. Technometrics 14(4):847–854

    Article  Google Scholar 

  • Hailstone J, Kilding AE (2011) Reliability and validity of the ZephyrTM BioHarnessTM to measure respiratory responses to exercise. Meas Phys Educ Exerc Sci 15(4):293–300

    Article  Google Scholar 

  • Hancock PA, Ross JM, Szalma JL (2007) A meta-analysis of performance response under thermal stressors. Hum Factors 49(5):851–877

    Article  CAS  Google Scholar 

  • Heineck G (2005) Up in the skies? The relationship between body height and earnings in Germany. Labour 19(3):469–489

    Article  Google Scholar 

  • Hwang S, Lee SH (2017) Wristband-type wearable health devices to measure construction workers’ physical demands. Autom Constr 83:330–340

    Article  Google Scholar 

  • Ilangkumaran M, Karthikeyan M, Ramachandran T, Boopathiraja M, Kirubakaran B (2014) Risk analysis and warning rate of hot environment for foundry industry using hybrid MCDM technique. Saf Sci 72:133–143

    Article  Google Scholar 

  • Jannadi MO, Assaf S (1998) Safety assessment in the built environment of Saudi Arabia. Saf Sci 29(1):15–24

    Article  Google Scholar 

  • Jannadi OA, Bu-Khamsin MS (2002) Safety factors considered by industrial contractors in Saudi Arabia. Build Environ 37(5):539–547

    Article  Google Scholar 

  • Jebelli H, Choi B, Kim H, Lee S (2018) Feasibility study of a wristband-type wearable sensor to understand construction workers’ physical and mental status. Construction Research Congress 2018: Construction Information Technology—Selected Papers from the Construction Research Congress 2018, 2018-April(March 2019):367–377

  • Jia YA, Rowlinson S, Ciccarelli M (2016) Climatic and psychosocial risks of heat illness incidents on construction site. Appl Ergon 53:25–35

    Article  Google Scholar 

  • Joubert D, Thomsen J, Harrison O (2011) Safety in the heat: a comprehensive program for prevention of heat illness among workers in Abu Dhabi, United Arab Emirates. Am J Public Health 101(3):395–398

    Article  Google Scholar 

  • Kakamu T, Endo S, Hidaka T, Masuishi Y, Kasuga H, Fukushima T (2021) Heat-related illness risk and associated personal and environmental factors of construction workers during work in summer. Sci Rep 11(1):1–6

    Article  Google Scholar 

  • Kartam N, Flood I, Koushki P (2000) Construction safety in Kuwait: issues, procedures, problems, and recommendations. Saf Sci 36(3):163–184

    Article  Google Scholar 

  • Khan F, Reniers G, Cozzani V (2017) Special issue: safety and integrity in harsh environments. Saf Sci 95:148–149

    Article  Google Scholar 

  • Lao J, Hansen A, Nitschke M, Hanson-Easey S, Pisaniello D (2016) Working smart: an exploration of council workers’ experiences and perceptions of heat in Adelaide, South Australia. Saf Sci 82:228–235

    Article  Google Scholar 

  • Lee W, Migliaccio GC (2014) Field use of physiological status monitoring (PSM) to identify construction workers’ physiologically acceptable bounds and heart rate zones. Computing in civil and building engineering. In: Proceedings of the 2014 international conference on computing in civil and building engineering (1967), pp 1037–1044

  • Lee W, Migliaccio GC (2016) Physiological cost of concrete construction activities. Constr Innov 16(3):281–306

    Article  Google Scholar 

  • Lee W, Migliaccio GC, Lin KY, Russo F (2015) Lessons learned from using bio-and environmental sensing in construction: a field implementation. In: 5th international/11th construction specialty conference (Cpwr 2013), pp 270–280

  • Lee W, Lin K-Y, Seto E, Migliaccio GC (2017) Wearable sensors for monitoring on-duty and off-duty worker physiological status and activities in construction. Autom Constr 83:341–353

    Article  Google Scholar 

  • Leiper J, Molla AM, Molla A (2003) Effects on health of fluid restriction during fasting in Ramadan. Eur J Clin Nutr 57:S30–S38

    Article  Google Scholar 

  • Liang C, Zheng G, Zhu N, Tian Z, Lu S, Chen Y (2011) A new environmental heat stress index for indoor hot and humid environments based on Cox regression. Build Environ 46(12):2472–2479

    Article  Google Scholar 

  • Lundgren K, Kuklane K, Venugopal V (2014) Occupational heat stress and associated productivity loss estimation using the PHS model (ISO 7933): a case study from workplaces in Chennai India. Glob Health Action 7(1):25283

    Article  Google Scholar 

  • Lundgren-Kownacki K, Martínez N, Johansson B, Psikuta A, Annaheim S, Kuklane K (2017) Human responses in heat—comparison of the Predicted Heat Strain and the Fiala multi-node model for a case of intermittent work. J Therm Biol 70(January):45–52

    Article  Google Scholar 

  • McCarren B, Alison JA, Herbert RD (2006) Vibration and its effect on the respiratory system. Aust J Physiother 52(1):39–43

    Article  Google Scholar 

  • McDonald O, Shanks N, Fragu L (2008) Heat stress improving safety in the arabian gulf oil and gas industry. Prof Saf 53(08):31–36

    Google Scholar 

  • Meo SA, Alsaaran ZF, Alshehri MK, Khashougji MA, Almeterk AAZ, Almutairi SF, Alsaeed SF (2013) Work-related musculoskeletal symptoms among building construction workers in Riyadh, Saudi Arabia. Pak J Med Sci 29(6):1394–1399

  • Migliaccio GC, Teizer J, Cheng T, Gatti UC (2012) Automatic identification of unsafe bending behavior of construction workers using real-time location sensing and physiological status monitoring. Constr Res Congr 633–642

  • Moohialdin ASM, Suhariadi BT, Siddiqui MK (2020) Practical validation measurements of a physiological status monitoring sensor in real construction activities. Proc Int Struct Eng Constr 5(2):1–6

    Google Scholar 

  • Morioka I, Miyai N, Miyashita K (2006) Hot environment and health problems of outdoor workers at a construction site. Ind Health 44(3):474–480

    Article  Google Scholar 

  • Norton K, Norton L, Sadgrove D (2010) Position statement on physical activity and exercise intensity terminology. J Sci Med Sport 13(5):496–502

    Article  Google Scholar 

  • Pal JS, Eltahir EAB (2016) Future temperature in southwest Asia projected to exceed a threshold for human adaptability. Nat Clim Chang 6(2):197–200

    Article  Google Scholar 

  • Pandian PS, Safeer KP, Gupta P, Shakunthala DT, Sundersheshu BS, Padaki VC (2008) Wireless sensor network for wearable physiological monitoring. J Networks 3(5):21–29

    Article  Google Scholar 

  • Petry NM (2002) A comparison of young, middle-aged, and older adult treatment-seeking pathological gamblers. Gerontologist 42(1):92–99

    Article  Google Scholar 

  • Pillsbury W, Clevenger CM, Abdallah M, Young R (2020) Capabilities of an assessment system for construction worker physiology. J Perform Constr Facil 34(2):04019120

    Article  Google Scholar 

  • Quarterly Climate Report (2017) The general authority of metrology and environmental protection. Retrieved from https://www.pme.gov.sa/en/meteorology/pages/meteorological_definition.aspx

  • Raines J, Snow R, Nichols D, Aisbett B (2015) Fluid intake, hydration, work physiology of wildfire fighters working in the heat over consecutive days. Ann Occup Hyg 59(5):554–565

    Google Scholar 

  • Ramadan J (2002) Does fasting during Ramadan alter body composition, blood constituents and physical performance? Med Princ Pract 11(SUPPL. 2):41–46

    Article  Google Scholar 

  • Roky R, Houti I, Moussamih S, Qotbi S, Aadil N (2004) Physiological and chronobiological changes during Ramadan intermittent fasting. Ann Nutr Metab 48(4):296–303

    Article  CAS  Google Scholar 

  • Rowlinson S, Jia YA (2014) Application of the predicted heat strain model in development of localized, threshold-based heat stress management guidelines for the construction industry. Ann Occup Hyg 58(3):326–339

    Google Scholar 

  • Rowlinson S, Jia YA (2015) Construction accident causality: an institutional analysis of heat illness incidents on site. Saf Sci 78:179–189

    Article  Google Scholar 

  • Rowlinson S, YunyanJia A, Li B, ChuanjingJu C (2014) Management of climatic heat stress risk in construction: a review of practices, methodologies, and future research. Accid Anal Prev 66:187–198

    Article  Google Scholar 

  • Rozenfeld O, Sacks R, Rosenfeld Y, Baum H (2010) Construction job safety analysis. Saf Sci 48(4):491–498

    Article  Google Scholar 

  • Shephard RJ (2012) The impact of Ramadan observance upon athletic performance. Nutrients 4(6):491–505

    Article  CAS  Google Scholar 

  • Shibani A, Saidani M, Alhajeri M (2013) Health and safety influence on the construction project performance in United Arab Emirates (UAE). J Civil Eng Constr Technol 4(2):32–44

    Google Scholar 

  • Tian Z, Zhu N, Zheng G, Wei H (2011) Experimental study on physiological and psychological effects of heat acclimatization in extreme hot environments. Build Environ 46(10):2033–2041

    Article  Google Scholar 

  • Toda M, Morimoto K (2004) Ramadan fasting—effect on healthy Muslims. Soc Behav Pers 32(1):13–18

    Article  Google Scholar 

  • Trepanowski JF, Bloomer RJ (2010) The impact of religious fasting on human health. Nutr J 9(1):1–9

    Article  Google Scholar 

  • Trevor S (2014) Heat has deadly impact on Nepal’s Gulf workers. Retrieved from Climate News Network: http://climatenewsnetwork.net/heat-has-deadlyimpact-on-nepals-gulf-workers-2/

  • Uth N, Sørensen H, Overgaard K, Pedersen PK (2004) Estimation of VO2max from the ratio between HRmax and HRrest—the heart rate ratio method. Eur J Appl Physiol 91(1):111–115

    Article  Google Scholar 

  • Wong DPL, Chung JWY, Chan APC, Wong FKW, Yi W (2014) Comparing the physiological and perceptual responses of construction workers (bar benders and bar fixers) in a hot environment. Appl Ergon 45(6):1705–1711

    Article  Google Scholar 

  • Xing X, Zhong B, Luo H, Rose T, Li J, Antwi-Afari MF (2020) Effects of physical fatigue on the induction of mental fatigue of construction workers: a pilot study based on a neurophysiological approach. Autom Constr 120:103381

    Article  Google Scholar 

  • Yang Y, Chan APC (2015) Perceptual strain index for heat strain assessment in an experimental study: an application to construction workers. J Therm Biol 48:21–27

    Article  CAS  Google Scholar 

  • Yang Y, Chan AP (2017) Intervention research gaps and recommendations 201. Ind Health 55:201–209

    Article  Google Scholar 

  • Yi W, Chan APC (2013) Optimizing work-rest schedule for construction rebar workers in hot and humid environment. Build Environ 61:104–113

    Article  Google Scholar 

  • Yi W, Chan APC (2015) Optimal work pattern for construction workers in hot weather: a case study in Hong Kong. J Comput Civ Eng 29(5):05014009

    Article  Google Scholar 

  • Yi W, Chan A (2017) Effects of heat stress on construction labor productivity in Hong Kong: a case study of rebar workers. Int J Environ Res Public Health 14(9):1055

    Article  Google Scholar 

  • Yi W, Chan APC, Wang X, Wang J (2016) Development of an early-warning system for site work in hot and humid environments: a case study. Autom Constr 62:101–113

    Article  Google Scholar 

  • Yi W, Zhao Y, Chan APC, Lam EWM (2017) Optimal cooling intervention for construction workers in a hot and humid environment. Build Environ 118:91–100

    Article  Google Scholar 

  • Zhao J, Zhu N, Lu S (2009) Productivity model in hot and humid environment based on heat tolerance time analysis. Build Environ 44(11):2202–2207

    Article  Google Scholar 

  • Zheng G, Zhu N, Tian Z, Chen Y, Sun B (2012) Application of a trapezoidal fuzzy AHP method for work safety evaluation and early warning rating of hot and humid environments. Saf Sci 50(2):228–239

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Muhammad Saiful Islam.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Moohialdin, A., Trigunarsyah, B., Islam, M.S. et al. Physiological impacts on construction workers under extremely hot and humid weather. Int Arch Occup Environ Health 95, 315–329 (2022). https://doi.org/10.1007/s00420-021-01785-w

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00420-021-01785-w

Keywords

Navigation