Abstract
Porous solid structures have attracted much attention because they are widely used in national defense, military industry, machinery, civil engineering and other fields. In this paper, the problem of free vibration of a porous rectangular plate with variable thickness is investigated. Firstly, given the two distribution modes of the porous rectangular plate along the thickness direction, the dimensionless governing differential equations for the free vibration of the porous rectangular plate are derived using the classical plate theory and the Hamiltonian variational principle. Then, the dimensionless governing differential equations of motion and boundary conditions are derived by converting them into algebraic equations through the differential transformation method (DTM). The dimensionless natural frequencies of the porous rectangular plate are solved by iterative convergence method through MATLAB programming. Finally, numerical examples are given to analyze the influence of different parameters on the vibration frequency of porous rectangular plates with different porosity distributions under different boundary conditions. Numerical examples show that the method has fast convergence speed and high accuracy. In addition, some novel results are presented in this paper, which can be used for reference in the following research on the vibration mechanical behavior of graded porous rectangular plates with variable thickness.
Similar content being viewed by others
Data availability
Data will be made available upon reasonable demand.
References
Krzysztof, M., Witkowski, D., Magnucka, B.: Buckling and free vibrations of rectangular plates with symmetrically varying mechanical properties—Analytical and FEM studies. Compos. Struct. 220, 355–361 (2019)
Wang, Z., Xing, Y., Sun, Q.: Highly accurate closed-form solutions for the free in-plane vibration of rectangular plates with arbitrary homogeneous boundary conditions. J. Sound. Vib. 470, 115166 (2020)
Abdikarimov, R., Amabili, M., Vatin, N.I., et al.: Dynamic stability of orthotropic viscoelastic rectangular plate of an arbitrarily varying thickness. Appl. Sci. 11, 6029 (2021)
Teng, Z.C., Heng, Y.Z., Cui, P., et al.: Free vibration and buckling characteristics of compressed non-homogeneous rectangular plates on Winkler foundation with variable stiffness. J. Vib. Shock 38(3), 258–266 (2019). (in Chinese)
Malekzdadeh, P., Karami, G.: Vibration of non-uniform thick plates on elastic foundation by differential quadrature method. Eng. Struct 26(10), 1473–1482 (2004)
Semnani, S., Attarnejad, R., Firouzjaei, R.: Free vibration analysis of variable thickness thin plates by two-dimensional differential transform method. Acta Mech. 224(8), 1643–1658 (2013)
Lal, R., Saini, R.: Buckling and vibration analysis of non-homogeneous rectangular Kirchhoff plates resting on two-parameter foundation. Meccanica 50(4), 893–913 (2015)
Wang, Z.K., Xing, Y.F., Li, G.: Closed-form solutions for the free vibrations of three dimensional orthotropic rectangular plates. Inter. J. Mech. Sci. 199, 106398 (2021)
Xing, Y.F., Xu, T.F.: Exact solution for free vibration of orthotropic rectangular thin plate on two parameter elastic foundation. J. Vib. Eng. 27(2), 269–274 (2014)
Zhang, J.H., Ullah, S., Zhong, Y.: New analytical free vibration solutions of orthotropic rectangular thin plates using generalized integral transformation. J. Comput. Appl. Math. 367, 112439 (2020)
Ming, H.H.: Vibration analysis of orthotropic rectangular plates on elastic foundations. Compos. Struct. 92(4), 844–852 (2010)
Lal, R., Yajuwindra, K.: Charactenistic orthogonal polynomials in the study of transverse vibrations of nonhomogeneous rectangular orthotropic plates of bilinerly varying thickness. Meccanica 47(1), 175–193 (2012)
Bahmyari, E., Ranji, A.R.: Free vibration analysis of orthotropic plates with vaiable thickness resting on non-uniform elastic foundation by element free Galerkin method. J. Mech. Sci. Tech. 26(9), 2685–2694 (2016)
Viet, N.V., Zaki, W.: Bending model for functionally graded porous shape memory alloy/poroelastic composite cantilever beams. Appl. Math. Model. 97, 398–417 (2021)
Penna, R., Feo, L., Lovisi, G.: Hygro-thermal bending behavior of porous FG nano-beams via local/nonlocal strain and stress gradient theories of elasticity. Compos. Struct. 263, 113627 (2021)
Kumar, P., Harsha, S.P.: Static analysis of porous core functionally graded piezoelectric (PCFGP) sandwich plate resting on the Winkler/Pasternak/Kerr foundation under thermo-electric effect. Mater. Today Commun. 32, 103929 (2021)
Brighenti, R., Tatar, F.: Thermo-mechanical performance of two-dimensional porous metamaterial plates. Inter. J. Mech. Sci. 107854 (2022)
Rezaei, A.S., Saidi, A.R.: Exact solution for free vibration of thick rectangular plates made of porous materials. Compos. Struct. 134(12), 1051–1060 (2015)
Toan, T.P., Nguyen, T.T., Dongkyu, L., et al.: Elastic buckling and free vibration analyses of porous-cellular plates with uniform and non-uniform porosity distributions. Aerosp. Sci. Tech. 79, 278–287 (2018)
Xue, Y.Q., Guo, Y.: Free vibration analysis of porous plates with porosity distributions in the thickness and in-plane directions using isogeometric approach. Inter. J. Mech. Sci. 152, 46–362 (2019)
Zhao, J.K.: Differential transformation and its application for electrical circuits. Huazhong University of Science and Technology Press, Wuhan (1988). (in Chinese)
Arikoglu, A., Ozkol, I.: Solution of fractional differential equations by using differential transform method. Chaos Soliton Fract. 34(5), 1473–1481 (2007)
Ertürk, V.S., Momani, S.: Solving systems of fractional differential equations using differential transform method. Appl. Math. Comput. 215(3), 142–151 (2008)
Nazari, D., Shahmorad, S.: Application of the fractional differential transform method fractional-order integro-differential equations with nonlocal boundary conditions. Appl. Math. Comput. 234(234), 883–891 (2010)
Chen, C.K., Ho, S.H.: Application of differential transformation eigenvalue problems. Appl. Math. Comput. 79(95), 171–179 (1996)
Kaya, M.O.: Free vibration analysis of a rotating Timoshenko beam by differential transform method. Aircr. Eng. Aerosp. Tec. 78(3), 194–203 (2006)
Ozgumus, O.O., Kaya, M.O.: Flapwise bending vibration analysis of a rotating tapered cantilever Bernoulli-Euler beam by differential transform method. J. Sound Vib. 289, 413–420 (2006)
Ozgumus, O.O., Kaya, M.O.: Flapwise bending vibration analysis of double tapered rotating Euler-Bernoulli beam by using the differential transform method. Meccanica 41(6), 661–670 (2006)
Shaban, M., Alipour, M.M.: Semi-analytical solution for free vibration of thick functionally graded plates rested on elastic foundation with elastically restrained edge. Acta Mech. Solida Sin. 24(4), 340–354 (2011)
Kaya, M.O., Ozgumus, O.O.: Flexural–torsional-coupled vibration analysis of axially loaded closed-section composite Timoshenko beam by using DTM. J. Sound Vib. 306(3–5), 495–506 (2007)
Yalcin, S., Arikoglu, A., Ozkol, I.: Free vibration analysis of circular plates by differential transformation method. Appl. Math. Comput. 212(2), 377–386 (2009)
Teng, Z.C., Xi, P.F.: Analysis on free vibration and critical buckling load of a FGM porous rectangular plate. J. Northwest. Polytechnical Univ. 39(2), 317–325 (2021). (in Chinese)
Xiang, Y.: Vibration of rectangular Mindlin plates resting on non-homogenous elastic foundations. Inter. J. Mech. Sci. 45(6–7), 1229–1244 (2003)
Lam, K.Y., He, X.Q.: Canonical exact solutions for Levy-plates on two-parameter foundation using Green’s functions. Eng. Struct. 22(4), 364–378 (2000)
Bhat, R.B., Laura, P., Gutierrez, R.G., et al.: Numerical experiments on the determination of natural frequencies of transverse vibrations of rectangular plates of non-uniform thickness. J. Sound Vib. 138(2), 205–219 (1990)
Acknowledgements
This work supported by Research Program supported by the Gansu Natural Science Foundation Project, Grant / Award Number: 20JR5RA379.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that the data have no conflicting interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Wang, W., Teng, Z. & Pu, Y. Analysis of free vibration characteristics of porous rectangular plates with variable thickness. Arch Appl Mech 93, 1437–1448 (2023). https://doi.org/10.1007/s00419-022-02337-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-022-02337-5