Abstract
This study intended to use optimized artificial neural network (ANN) for the design of pure cohesive slopes (by means of considering sufficient safety factors (SF) of stability). A total of 630 finite element limit equilibrium analysis were completed to provide datasets of training and testing for preparation of the ANN-based predictive models. The database consisted of 504 training datasets (80% of the database) and 126 testing datasets (20% of the database). To construct an optimized ANN structure, variables of ANN algorithm such as a number of neurons in hidden layer and the number of hidden layers were changed (e.g. with a series of trial and error process). The input parameters that used in the analysis include setback distance ratio (b/B), the undrained shear strength of the cohesive soil (Cu), applied stresses on the slope (Fy) and slope angle (β) while the final output was the value of SF. The predicted results for datasets from ANN models were assessed based on several well-known statistical indices namely, R2, RMSE and VAF. Also, in order to evaluate the performance of predicted network two ranking systems of (1) colour intensity rating (CIR) and (2) total ranking method (TRM), i.e. based on the result of statistical indices, were utilized. The optimal architecture of 4 × 6 × 1 was found for the ANN structure. After the performance of the optimized ANN model, the results are provided as a simple tansig formula which can be used for further application of engineering purposes. In the optimized ANN network and based on R2, RMSE and VAF, values of (0.999, 0.0350 and 99.9978) and (0.999, 0.0379 and 99.998) were found, respectively, for both of the normalized training and testing datasets. This proves the excellent performance of the proposed ANN model in estimating the SF of the slope. As the final outputs and to show the reliability of the proposed ANN formula, a series of optimized ANN design solution charts are compared to a similar example of measured charts.
Similar content being viewed by others
References
Latifi N, Vahedifard F, Ghazanfari E, Horpibulsuk S, Marto A, Williams J (2017) Sustainable improvement of clays using low-carbon nontraditional additive. Int J Geomech 18:04017162
Latifi N, Rashid ASA, Siddiqua S, Abd Majid MZ (2016) Strength measurement and textural characteristics of tropical residual soil stabilised with liquid polymer. Measurement 91:46–54
Moayedi H, Huat B, Kazemian S, Asadi A (2010) Optimization of shear behavior of reinforcement through the reinforced slope. Electronic Journal of Geotechnical Engineering
Moayedi H, Huat BBK, Kazemian S, Asadi A (2010) Optimization of tension absorption of geosynthetics through reinforced slope. Electron J Geotech Eng 15:93–104
Marto A, Latifi N, Janbaz M, Kholghifard M, Khari M, Alimohammadi P, Banadaki AD (2012) Foundation size effect on modulus of subgrade reaction on sandy soils. Electron J Geotech Eng 17:2523–2530
Raftari M, Kassim KA, Rashid ASA, Moayedi H (2013) Settlement of shallow foundations near reinforced slopes. Electron J Geotech Eng 18:797–808
Gordan B, Armaghani DJ, Adnan AB, Rashid ASA (2016) A new model for determining slope stability based on seismic motion performance. Soil Mech Found Eng 53:344–351
Youssef AM, Pradhan B, Al-Harthi SG (2015) Assessment of rock slope stability and structurally controlled failures along Samma escarpment road, Asir Region (Saudi Arabia). Arab J Geosci 8:6835–6852
Chakraborty A, Goswami D (2017) Prediction of slope stability using multiple linear regression (MLR) and artificial neural network (ANN). Arab J Geosci 10:11
Acharyya R, Dey A Assessment of bearing capacity for strip footing located near sloping surface considering ANN model. Neural Comput Appl 1–14
Singh J, Banka H, Verma AK A BBO-based algorithm for slope stability analysis by locating critical failure surface. Neural Comput Appl 1–18
Jellali B, Frikha W (2017) Constrained particle swarm optimization algorithm applied to slope stability. Int J Geomech 17:06017022
Pei H, Zhang S, Borana L, Zhao Y, Yin J (2019) Slope stability analysis based on real-time displacement measurements. Measurement 131:686–693
Cao MS, Qiao PZ (2008) Neural network committee-based sensitivity analysis strategy for geotechnical engineering problems. Neural Comput Appl 17:509–519
Binh Thai P, Manh Duc N, Kien-Trinh Thi B, Prakash I, Chapi K, Dieu Tien B (2019) A novel artificial intelligence approach based on multi-layer perceptron neural network and biogeography-based optimization for predicting coefficient of consolidation of soil. Catena 173:302–311
Zhang ZF, Liu ZB, Zheng LF, Zhang Y (2014) Development of an adaptive relevance vector machine approach for slope stability inference. Neural Comput Appl 25:2025–2035
Choobbasti AJ, Farrokhzad F, Barari A (2009) Prediction of slope stability using artificial neural network (case study: Noabad, Mazandaran, Iran). Arab J Geosci 2:311–319
Chen J, Yin J-H, Lee CF (2003) Upper bound limit analysis of slope stability using rigid finite elements and nonlinear programming. Can Geotech J 40:742–752
Kaunda RB, Chase RB, Kehew AE, Kaugars K, Selegean JP (2010) Neural network modeling applications in active slope stability problems. Environ Earth Sci 60:1545–1558
Aghajani HF, Salehzadeh H, Shahnazari H (2015) Application of artificial neural network for calculating anisotropic friction angle of sands and effect on slope stability. J Central South Univ 22:1878–1891
Gordan B, Armaghani DJ, Hajihassani M, Monjezi M (2016) Prediction of seismic slope stability through combination of particle swarm optimization and neural network. Eng Comput 32:85–97
McCulloch W, Pitts W (1943) A logical calculus of the ideas immanent in nervous activity. Bull Math Biophys 5:115–133
Hebb D (1949) The organization of behavior: a neurophysiological approach. Wiley, Hoboken
Gao W, Guirao JLG, Basavanagoud B, Wu J (2018) Partial multi-dividing ontology learning algorithm. Inf Sci 467:35–58
Gao W, Wang W, Dimitrov D, Wang Y (2018) Nano properties analysis via fourth multiplicative ABC indicator calculating. Arab J Chem 11:793–801
Yaseen ZM, Fu M, Wang C, Mohtar WHMW, Deo RC, El-shafie A (2018) Application of the hybrid artificial neural network coupled with rolling mechanism and grey model algorithms for streamflow forecasting over multiple time horizons. Water Resour Manage 32:1883–1899
Shanmugaprakash M, Venkatachalam S, Rajendran K, Pugazhendhi A (2018) Biosorptive removal of Zn(II) ions by Pongamia oil cake (Pongamia pinnata) in batch and fixed-bed column studies using response surface methodology and artificial neural network. J Environ Manag 227:216–228
Nguyen H, Bui X-N, Bui H-B, Mai N, Luan (2018) A comparative study of artificial neural networks in predicting blast-induced air-blast overpressure at Deo Nai open-pit coal mine, Vietnam. Neural Comput Appl 1–17
Nguyen H, Bui X-N (2018) Predicting blast-induced air overpressure: a robust artificial intelligence system based on artificial neural networks and random forest. Nat Resour Res 1–15
Ngoc Le C, Thanh-Phong D, Van Thanh Tien N (2018) An efficient hybrid approach of finite element method, artificial neural network-based multiobjective genetic algorithm for computational optimization of a linear compliant mechanism of nanoindentation tester. Mathematical Problems in Engineering
Gao W, Dimitrov D, Abdo H (2018) Tight independent set neighborhood union condition for fractional critical deleted graphs and ID deleted graphs. Discrete Cont Dyn Syst-S 123–144
Gao W, Wu H, Siddiqui MK, Baig AQ (2018) Study of biological networks using graph theory. Saudi J Biol Sci 25:1212–1219
Gao W, Guirao JLG, Abdel-Aty M, Xi W (2019) An independent set degree condition for fractional critical deleted graphs. Discrete Cont Dyn Syst-S 12:877–886
Mosallanezhad M, Moayedi H (2017) Developing hybrid artificial neural network model for predicting uplift resistance of screw piles. Arab J Geosci 10:10
Gandomi AH, Alavi AH (2012) A new multi-gene genetic programming approach to non-linear system modeling. Part II: geotechnical and earthquake engineering problems. Neural Comput Appl 21:189–201
Moayedi H, Armaghani DJ (2017) Optimizing an ANN model with ICA for estimating bearing capacity of driven pile in cohesionless soil. Eng Comput 34:1–10
Moayedi H, Mosallanezhad M, Safuan ARA, Amizah WJW, Muazu MA (2019) A systematic review and meta-analysis of artificial neural network application in geotechnical engineering: theory and applications. Neural Computing and Applications
Abusharar SW, Han J (2011) Two-dimensional deep-seated slope stability analysis of embankments over stone column-improved soft clay. Eng Geol 120:103–110
Nazir R, Moayedi H (2014) Soil mass loss reduction during rainfalls by reinforcing the slopes with the surficial confinement
Nazir R, Ghareh S, Mosallanezhad M, Moayedi H (2016) The influence of rainfall intensity on soil loss mass from cellular confined slopes. Measurement 81:13–25
Nguyen H, Bui X-N, Tran Q-H, Mai N-L (2019) A new soft computing model for estimating and controlling blast-produced ground vibration based on hierarchical K-means clustering and cubist algorithms. Applied Soft Computing
Moayedi H (2018) Optimization of ANFIS with GA and PSO estimating α in driven shafts. Eng Comput 35:1–12
Nguyen H, Bui X-N, Tran Q-H, Le T-Q, Do N-H (2019) Evaluating and predicting blast-induced ground vibration in open-cast mine using ANN: a case study in Vietnam. SN Appl Sci 1:125
Moayedi H, Hayati S (2018) Modelling and optimization of ultimate bearing capacity of strip footing near a slope by soft computing methods. Appl Soft Comput 66:208–219
Bui X-N, Nguyen H, Le H-A, Bui H-B, Do N-H (2019) Prediction of blast-induced air over-pressure in open-pit mine: assessment of different artificial intelligence techniques. Nat Resour Res 1–21
Nguyen H, Bui X-N, Bui H-B, Mai N-L (2018) A comparative study of artificial neural networks in predicting blast-induced air-blast overpressure at Deo Nai open-pit coal mine, Vietnam. Neural Comput Appl 1–17
Moayedi H, Hayati S (2018) Applicability of a CPT-based neural network solution in predicting load-settlement responses of bored pile. Int J Geomech 18:06018009
Moayedi H, Hayati S (2018) Artificial intelligence design charts for predicting friction capacity of driven pile in clay. Neural Computing and Applications 31 (in press)
Moayedi H, Mosallanezhad M, Mehrabi M, Safuan ARA, Biswajeet P (2018) Modification of landslide susceptibility mapping using optimized PSO-ANN technique. Eng Comput 35:1–18
Bunawan AR, Momeni E, Armaghani DJ, Rashid ASA (2018) Experimental and intelligent techniques to estimate bearing capacity of cohesive soft soils reinforced with soil-cement columns. Measurement 124:529–538
Najafi B, Ardabili SF, Mosavi A, Shamshirband S, Rabczuk T (2018) An intelligent artificial neural network-response surface methodology method for accessing the optimum biodiesel and diesel fuel blending conditions in a diesel engine from the viewpoint of exergy and energy analysis. Energies 11:860
Lotfinejad MM, Hafezi R, Khanali M, Hosseini SS, Mehrpooya M, Shamshirband S (2018) A comparative assessment of predicting daily solar radiation using bat neural network (BNN), generalized regression neural network (GRNN), and neuro-fuzzy (NF) system: a case study. Energies 11:1188
Ghorbani MA, Kazempour R, Chau K-W, Shamshirband S, Ghazvinei PT (2018) Forecasting pan evaporation with an integrated artificial neural network quantum-behaved particle swarm optimization model: a case study in Talesh, Northern Iran. Eng Appl Comput Fluid Mech 12:724–737
Ghazvinei PT, Darvishi HH, Mosavi A, Yusof KbW, Alizamir M, Shamshirband S, Chau K-w (2018) Sugarcane growth prediction based on meteorological parameters using extreme learning machine and artificial neural network. Eng Appl Comput Fluid Mech 12:738–749
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Bui, XN., Muazu, M.A. & Nguyen, H. Optimizing Levenberg–Marquardt backpropagation technique in predicting factor of safety of slopes after two-dimensional OptumG2 analysis. Engineering with Computers 36, 941–952 (2020). https://doi.org/10.1007/s00366-019-00741-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-019-00741-0