Abstract
The creep behavior and structure evolution of an advanced ultra-supercritical 9Cr-1.5Mo-1Co-VNbBN martensitic steel were investigated at temperatures of 620 °C and 650 °C. The microstructure before and after creep was observed by optical microscopy and transmission electron microscopy. It was shown that high temperature and high stress promoted the recovery of the laths and the growth of the secondary phases. The spheroidal precipitation of M23C6 within the sample which crept at 620 °C for 1994 h/5075 h and 650 °C for 942 h, grows continuously with increasing creep time and temperature, as results of atom diffusion at high temperature and plastic flow, while MX particles maintained high stability. Laves phase of Fe2Mo precipitated and grew rapidly into large size of samples after the creep and aging exposure at 620 °C for 1994 h and more, resulting in a negative effect on the creep resistance of the steel.
Similar content being viewed by others
References
F. Masuyama, ISIJ Int. 41, 612 (2001)
F. Abe, M. Taneike, K. Sawada, Int. J. Press. Vessels Pip. 84, 3 (2017)
F. Abe, Engineering 1, 211 (2015)
V. Dudko, A. Belyakov, D. Molodov, R. Kaibyshev, Metall. Mater. Trans. A. 44, 162 (2013)
M. Mikami, Mater. Sci. Technol. 33, 1074 (2017)
T. Kern, M. Staubli, B. Scarlin, ISIJ Int. 42, 1515 (2002)
J. Gao, Z. Dong, H. Ren, B. Ning, X. Xu, Z. Chen, Steel Res. Int. 90, 1800534 (2019)
R. Vanstone, I. Chilton, P. Jaworski, J. Eng. Gas Turbines Power 135, 062101 (2013)
D. Jandova, J. Kasl, E. Chvostova, Mater. Sci. Forum. 782, 311 (2014)
S. Baumgartner, H. Pahr, T. Zauchner, Weld World 62, 811 (2018)
F. Abe, in Creep-resistant steels, ed. by F. Abe, T. Kern, R. Viswanathan (Woodhead Publishing Limited, Cambridge, 2008) pp. 3–6
N. Dudova, R. Mishnev, R. Kaibyshev, Mater. Sci. Eng. A 766, 138353 (2019)
Y.I. Borisova, V.A. Dudko, V.N. Skorobogatykh, I.A. Shchenkova, R.O. Kaibyshev, Phys. Met. Metall. 118, 1022 (2017)
J. Baral, J. Swaminathan, R.N. Ghosh, Procedia Eng 55, 88 (2013)
P. Hofer, H. Cerjak, B. Schaffernak, P. Warbichler, Steel Res. 69, 343 (1998)
E. Tkachev, A. Belyakov, R. Kaibyshev, Mater. Sci. Eng. A 725, 228 (2018)
K. Sawada, K. Kubo, F. Abe, Mater. Sci. Eng. A 319–321, 784 (2001)
P. Hu, W. Yan, W. Sha, W. Wang, Y. Shan, K. Yang, J. Mater. Sci. Technol. 27, 344 (2011)
A. Gustafson, M. Hattestrand, Mater. Sci. Eng. A 333, 279 (2002)
C.G. Panait, A. Zielinska-Lipiec, T. Koziel, A. Czyrska-Filemonowicz, A. Gourgues-Lorenzon, W. Bendick, Mater. Sci. Eng. A 527, 4062 (2010)
I. Fedorova, A. Belyakov, P. Kozlov, V. Skorobogatykh, I. Shenkova, R. Kaibyshev, Mater. Sci. Eng. A 615, 153 (2014)
H. Cui, F. Sun, K. Chen, L. Zhang, R. Wan, A. Shan, J. Wu, Mater. Sci. Eng. A 527, 7505 (2010)
Y. Xu, M. Wang, Y. Wang, T. Gu, L. Chen, X. Zhou, Q. Ma, Y. Liu, J. Huang, J Alloys Compd. 621, 93 (2015)
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (Grant No. 51901157 and 51771137), Tianjin Science and Technology Project (17YFZCGX00900) and the Ph.D. startup foundation of Tianjin Normal University (043135202-XB1710).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Gao, J., Dong, Z. Creep behavior and structure evolution of an advanced 9Cr-1.5Mo-1Co-VNbBN heat-resistant steel at elevated temperature. Appl. Phys. A 126, 648 (2020). https://doi.org/10.1007/s00339-020-03842-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-020-03842-6