Abstract
Ripple-structured ZnO thin films were prepared on Si (100) substrate by sol–gel spin-coating method with different heating rates during preheating process and finally sintered at 500 °C for 2 h in ambient condition. The structural, morphological and photoluminescence (PL) properties of the nanostructured films were analyzed by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and PL spectroscopy. XRD analysis revealed that films have hexagonal wurtzite structure and texture coefficient increases along (002) plane with preheating rate. The faster heating rate produced higher crystallization and larger average crystallite size. The AFM and SEM images indicate that all the films have uniformly distributed ripple structure with skeletal branches. The number of ripples increases, while the rms roughness, amplitude and correlation length of the ripple structure decrease with preheating rates. The PL spectra show the presence of different defects in the structure. The ultraviolet emission improved with the heating rate which indicates its better crystallinity.
Similar content being viewed by others
References
D.C. Lim, W.H. Shim, K. Kim, H.O. Seo, J. Lim, Y. Jeong, Y.D. Kim, K.H. Lee, Spontaneous formation of nanoripples on the surface of the ZnO thin films as hole-blocking layer of inverted organic solar cells. Sol. Energy Mater. Sol. Cells 95, 3036–3040 (2011)
W. Song, S.Y. Kwon, S. Myung, M.W. Jung, S.J. Kim, B.K. Min, M. Kang, S.H. Kim, J. Lim, K.S. An, High mobility ambipolar ZnO–graphene hybrid thin film transistors. Sci. Rep. 4, 4064 (2014)
B.R. Lee, E.D. Jung, J.S. Park, Y.S. Nam, S.H. Min, B. Kim, K. Lee, J. Jeong, R.H. Friend, J. Kim, S.O. Kim, M.H. Song, Highly efficient polymer light-emitting diode using surface modifications of ZnO layer. Nat. Commun. 5, 4840 (2014)
S. Jeong, B. Kim, B. Lee, Photoluminescence dependence of ZnO films grown on Si(100) by radio frequency magnetron sputtering on the growth ambient. Appl. Phys. Lett. 82, 2625–2627 (2003)
M.G. Tsoutsovua, C.N. Panagopoulus, D. Papadimitriou, I. Fasaki, M. Kompitsas, ZnO thin films prepared by pulsed laser deposition. Mater. Sci. Eng. B 176, 480–483 (2011)
V. Kumar, N. Singh, R.M. Mehra, A. Kapoor, L.P. Purohit, H.C. Swart, Role of film thickness on the properties of ZnO thin films grown by sol–gel method. Thin Solid Films 539, 161–165 (2013)
M. Purica, E. Budianu, E. Rusu, M. Danila, R. Gavrila, Optical and structural investigation of ZnO thin films prepared by chemical vapor deposition (CVD). Thin Solid Films 403, 485–488 (2002)
M. Dutta, S. Mridha, D. Basak, Effect of sol concentration on the properties of ZnO thin film prepared by sol–gel method. Appl. Surf. Sci. 254, 2743–2747 (2008)
Y. Li, L. Xu, X. Li, X. Shen, A. Wang, Effect of aging time of ZnO sol on the structural and optical properties of ZnO thin films prepared by sol–gel method. Appl. Surf. Sci. 256, 4543–4547 (2010)
D. Raoufi, T. Raoufi, The effect of heat treatment on the physical properties of sol–gel derived ZnO thin films. Appl. Surf. Sci. 255, 5812–5817 (2009)
S.J. Kwon, J.H. Park, J.G. Park, Wrinkling of sol–gel-derived thin film. Phys. Rev. E 71, 011604 (2005)
S. Cho, K. Kim, J. Heo, J.Y. Lee, G. Cha, B.Y. Seo, Y.D. Kim, Y.S. Kim, S. Choi, D.C. Lim, Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk-heterojunction solar cells. Sci. Rep. 4, 4306 (2014)
K. Yuan, L. Chen, F. Lee, Y. Chen, Nanostructured hybrid ZnO@CdS nanowalls grown in situ for inverted polymer solar cells. J. Mater. Chem. C 2, 1018–1027 (2014)
H. Park, D. Lim, K. Kim, S. Jang, Performance optimization of low-temperature-annealed solution-processable ZnO buffer layer for inverted polymer solar cells. J. Mater. Chem. A. 1, 6327–6334 (2013)
S. Schumann, R. Campo, B. Illy, A. Cruickshank, M.A. McLachlan, M.P. Ryan, D.J. Riley, D.W. McComb, T.S. Jones, Inverted organic photovoltaic devices with high efficiency and stability based on metal oxide charge extraction layers. J. Mater. Chem. 21, 2381–2386 (2011)
M.S. Kim, K.G. Yim, D. Lee, J.S. Kim, J.S. Kim, J. Son, J. Leem, Effect of cooling rate and post heat treatment on properties of ZnO thin films deposited by sol–gel method. Appl. Surf. Sci. 257, 9019–9023 (2011)
T.Q. Liu, O. Sakurai, N. Mizutani, M. Kato, Preparation of fine ZnO nanoparticles by the spray pyrolysis method using ultrasonic atomization techniques. J. Mater. Sci. 21, 3698–3702 (1986)
I. Horcas, R. Fernandez, J.M. Gomez-Rodriguez, J. Colchero, J. Gomez-Herrero, A.M. Baro, WSXM: software for scanning probe microscopy and a tool for nanotechnology. Rev. Sci. Instrum. 78, 013705 (2007)
M. Kumar, A. Kumar, A.C. Abhyankar, Influence of texture coefficient on surface morphology and sensing properties of the W-doped nanocrystalline tin oxide thin films. ACS Appl. Mater. Interfaces (2015). doi:10.1021/am507397z
C. Tsay, K. Fan, C. Chen, J. Wu, C. Lei, Effect of preheating process on crystallization and optical properties of the sol–gel derived ZnO semiconductor thin films. J. Electroceram. 26, 23–27 (2011)
D. Bao, H. Gu, A. Kuang, Sol–gel derived c-axis oriented ZnO thin films. Thin Solid Films 312, 37–39 (1998)
R. Ghosh, D. Basak, S. Fuzihara, Effect of substrate-induced strain on the structural, electrical, and optical properties of polycrystalline ZnO thin films. J. Appl. Phys. 96, 2689 (2004)
H.C. Ong, A.X.E. Zhu, G.T. Du, Dependence of the excitonic transition energies and mosaicity on residual strain in ZnO thin films. Appl. Phys. Lett. 80, 941–943 (2002)
S.H. Hu, Y.C. Lee, J.W. Lee, J.C. Huang, J.L. Shen, W. Water, The structural and optical properties of ZnO/Si thin films by RTA treatment. Appl. Surf. Sci. 254, 1578–1582 (2008)
S.S. Sengupta, S.M. Park, D.A. Payne, L.H. Allen, Origins and evolution of stress development in sol–gel derived thin layers and multideposited coatings of lead titanate. J. Appl. Phys. 83, 2292–2296 (1998)
R. Tsuchikawa, H. Ahn, S. Yao, K.D. Belfield, M. Ishigami, Photosensitization of carbon nanotubes using dye aggregates. J. Phys. Condens. Matter 23, 202204 (2011)
D. Raoufi, A. Kiasatpour, H.R. Fallah, A.S.H. Rozatian, Surface characterization and microstructure of ITO thin films at different annealing temperatures. Appl. Surf. Sci. 253, 9085–9090 (2007)
G.W. Scherer, Sintering of sol–gel films. J. Sol–Gel Sci. Technol. 8(1), 353–363 (1997)
A. Monemdjou, F.E. Ghodsi, J. Mazloom, The effects of surface morphology and electrical properties of nanostructured AZO thin films: fractal and phase imaging analysis. Superlattice Microstruct. 74, 19–33 (2014)
D. Das, P. Mondal, Photoluminescence phenomena prevailing in c-axis oriented intrinsic ZnO thin films prepared by RF magnetron sputtering. RSC Adv. 4, 35735–37743 (2014)
R.K. Biroju, P.K. Giri, S. Dhara, K. Imakita, M. Fujii, Graphene-assisted controlled growth of highly aligned ZnO nanorods and nanoribbons: growth mechanism and photoluminescence properties. ACS Appl. Mater. Interfaces 6, 377–387 (2014)
Acknowledgments
Kumar Navin is thankful to TEQIP-II for financial assistance and to the Director, MANIT, for providing infrastructure to carry out this research work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Navin, K., Kurchania, R. Structural, morphological and optical studies of ripple-structured ZnO thin films. Appl. Phys. A 121, 1155–1161 (2015). https://doi.org/10.1007/s00339-015-9481-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-015-9481-9