Skip to main content
Log in

Synthesis and characterization of methacrylamide-acrylic acid-N-isopropylacrylamide polymeric hydrogel: degradation kinetics and rheological studies

  • Original Paper
  • Published:
Polymer Bulletin Aims and scope Submit manuscript

Abstract

Methacrylamide-acrylic acid-N-isopropylacrylamide terpolymeric hydrogels have been prepared via free radical polymerization using diammonium-peroxo-disulphate initiator system and ethylene glycol-di-methacrylate as a cross-linker. The hydrogels were characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. Molar mass was determined by viscometric method. Rheological profiling of the hydrogels was carried out by rheological measurements at various temperatures and methacrylamide contents in hydrogels. Thermogravimetric data were analyzed to assess the kinetic triplet by iso-conversional method. The values of apparent activation energy (E a) figured out from TG data were measured for each step by Kissinger–Akahira–Sunose method. On the findings of results, the decomposition reaction of terpolymeric hydrogels has been analyzed as a slow reaction, which is evident from the low-frequency factor values (A), i.e., 3 × 106, 2 × 1010, and 4 × 1015 s−1, respectively. The master plot method was used to predict the mechanism for degradation of MANIPAM-7. Flow curve and frequency sweep tests at different temperatures showed temperature dependency with shear rate indicating the pseudo-plastic nature of the synthesized samples. The rheological parameters were analyzed using various models. Out of these methods, the Ostwald, modified Bingham, and Herschel–Bulkley models were established to provide better fit to experimental data. Dynamic moduli measured as a function of angular frequency showed viscoelastic nature of all the samples. Frequency sweep studies indicated that storage (G′) and loss modulus (G″) showed an increase with increasing concentration of methacrylamide. Composition dependency of crossover frequency directed an increase in relaxation time with methacrylamide contents in the hydrogel.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Stuart MAC et al (2010) Emerging applications of stimuli-responsive polymer materials. Nat Mat 9(2):101–113

    Article  Google Scholar 

  2. Kumar A, Raj R, Kailas SV (2015) A novel in situ polymer derived nano ceramic MMC by friction stir processing. Mater Des 85:626–634

    Article  Google Scholar 

  3. Singh S, Prasher S (2004) The etching and structural response of Makrofol-N and Makrofol-KG polycarbonate to γ-irradiation. Radiat Eff Defect Solids 159(6):359–367

    Article  CAS  Google Scholar 

  4. Harris FW (1981) Introduction to polymer chemistry. J Chem Educ 58(11):837–843

    Article  CAS  Google Scholar 

  5. Qiu Y, Park K (2001) Environment-sensitive hydrogels for drug delivery. Adv Drug Deliv Rev 53(3):321–339

    Article  CAS  Google Scholar 

  6. Chen G, Hoffman AS (1995) Graft copolymers that exhibit temperature-induced phase transitions over a wide range of pH. Nature 373(6509):49–52

    Article  CAS  Google Scholar 

  7. Seddiki N, Aliouche D (2013) Synthesis, rheological behavior and swelling properties of copolymer hydrogels based on poly (N-isopropylacrylamide) with hydrophilic monomers. Bull Chem Soc Ethiop 27(3):447–457

    Google Scholar 

  8. Shah N, Patel K (2014) Formulation and development of hydrogel for poly acrylamide-co-acrylic acid. J Pharm Sci Biosci Res 4:114–120

    Google Scholar 

  9. Ahamed MR et al (2010) Cation exchange properties of a terpolymer: synthesis and characterization. Int J Chem Environ Eng 1(1):7–12

    CAS  Google Scholar 

  10. Islam MT et al (2004) Rheological characterization of topical carbomer gels neutralized to different pH. Pharm Res 21(7):1192–1199

    Article  CAS  Google Scholar 

  11. Akbar J et al (2012) A QSPR study of drug release from an arabinoxylan using ab initio optimization and neural networks. Carbohyd Polym 88(4):1348–1357

    Article  CAS  Google Scholar 

  12. Silva R et al (2010) Miscibility influence in the thermal stability and kinetic parameters of poly (3-hydroxybutyrate)/poly (ethylene terephthalate) sulphonated blends. Polimeros 20(2):153–158

    CAS  Google Scholar 

  13. Rajeshwar K (1983) Thermal analysis of coals, oil shales and oil sands. Thermochim Acta 63(1):97–112

    Article  CAS  Google Scholar 

  14. Jaber J, Probert S (2000) Non-isothermal thermogravimetry and decomposition kinetics of two Jordanian oil shales under different processing conditions. Fuel Process Technol 63(1):57–70

    Article  CAS  Google Scholar 

  15. Akbar J et al (2012) Kinetics and mechanism of thermal degradation of pentose-and hexose-based carbohydrate polymers. Carbohyd Polym 90(3):1386–1393

    Article  CAS  Google Scholar 

  16. Khawam A, Flanagan DR (2006) Solid-state kinetic models: basics and mathematical fundamentals. J Phys Chem B 110(35):17315–17328

    Article  CAS  Google Scholar 

  17. Pienaar A, Vilakazi B (2012) Gas-phase fluorination kinetics of Ta2O5 with elemental fluorine. J South Afr Inst Min Metall 112:545–549

    CAS  Google Scholar 

  18. Turmanova SC et al (2008) Non-isothermal degradation kinetics of filled with rise husk ash polypropene composites. Express Polym Lett 2(2):133–146

    Article  CAS  Google Scholar 

  19. Vlaev L et al (2008) A comparative study of non-isothermal kinetics of decomposition of calcium oxalate monohydrate. J Anal Appl Pyrol 81(2):253–262

    Article  CAS  Google Scholar 

  20. Georgieva V, Zvezdova D, Vlaev L (2013) Non-isothermal kinetics of thermal degradation of chitin. J Therm Anal Calorim 111(1):763–771

    Article  CAS  Google Scholar 

  21. Ruvolo-Filho A, Curti PS (2006) Chemical kinetic model and thermodynamic compensation effect of alkaline hydrolysis of waste poly (ethylene terephthalate) in nonaqueous ethylene glycol solution. Ind Eng Chem 45(24):7985–7996

    Article  CAS  Google Scholar 

  22. Wissemborski R, Klein R (2010) Welding and marking of plastics with lasers. Laser Tech J 7(5):19–22

    Article  Google Scholar 

  23. Guan J, Chen G (2010) Copolymerization modification of silk fabric with organophosphorous flame retardant. Fire. Mater 37(5):261–270

    Google Scholar 

  24. Dumitriu RP, Cazacu G, Vasilescu DS (2015) Rheological behavior of alginate-lignosulfonate blend solutions. In: Proceedings of the 5th European conference of chemical engineering (ECCE’15). Mathematical and computational methods in applied sciences, vol 15, pp 161–165

  25. Al-Shammari B et al (2011) The effect of polymer concentration and temperature on the rheological behavior of metallocene linear low density polyethylene (mLLDPE) solutions. J KSU Eng Sci 23(1):9–14

    Google Scholar 

  26. Al-Fariss T, Al-Zahrani S (1993) Rheological behaviour of some dilute polymer solutions. Eng Sci 5(1):95–109

    Google Scholar 

  27. Alakali JS-A, Irtwange SV, Mkavga M (2009) Rheological characteristics of food gum (Cissus populnea). Afr J Food Sci 3(9):237–242

    Google Scholar 

  28. Mohammed MA, Mohammed AJ (2009) Effect of type and concentration of different water soluble polymer solutions on rheological properties. NUCEJ 12:26–37

    Google Scholar 

  29. Bird RB, Armstrong RC, Hassager O (1987) Dynamics of polymeric liquids. Vol. 1: Fluid mechanics. Wiley-Interscience, New York

    Google Scholar 

  30. Mastalska-Popławska J et al (2016) Rheology of cross-linked poly(sodium acrylate)/sodium silicate hydrogels. Arab J Sci Eng 41(6):2221–2228

    Article  Google Scholar 

  31. Tonon R et al (2009) Steady and dynamic shear rheological properties of açai pulp. J Food Eng 92(4):425–431

    Article  CAS  Google Scholar 

  32. Shchipunov YA, Hoffmann H (2000) Thinning and thickening effects induced by shearing in lecithin solutions of polymer-like micelles. Rheol Acta 39(6):542–553

    Article  CAS  Google Scholar 

  33. Okamoto M et al (2001) A house of cards structure in polypropylene/clay nanocomposites under elongational flow. Nano Lett 1(6):295–298

    Article  CAS  Google Scholar 

  34. Liu R et al (2014) Rheological properties of hydrophobically associative copolymers prepared in a mixed micellar method based on methacryloxyethyl-dimethyl cetyl ammonium chloride as surfmer. Int J Polym Sci 2014:1–14

    CAS  Google Scholar 

  35. Tae G et al (2001) Hydrogels with controlled, surface erosion characteristics from self-assembly of fluoroalkyl-ended poly (ethylene glycol). Macromol 34(18):6409–6419

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Muhammad Aslam Malana.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 492 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kousar, F., Malana, M.A., Chughtai, A.H. et al. Synthesis and characterization of methacrylamide-acrylic acid-N-isopropylacrylamide polymeric hydrogel: degradation kinetics and rheological studies. Polym. Bull. 75, 1275–1298 (2018). https://doi.org/10.1007/s00289-017-2090-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00289-017-2090-3

Keywords

Navigation