Abstract
Sedimentation velocity experiments performed in the analytical ultracentrifuge are modeled using finite-element solutions of the Lamm equation. During modeling, three fundamental parameters are optimized: the sedimentation coefficients, the diffusion coefficients, and the partial concentrations of all solutes present in a mixture. A general modeling approach consists of fitting the partial concentrations of solutes defined in a two-dimensional grid of sedimentation and diffusion coefficient combinations that cover the range of possible solutes for a given mixture. An increasing number of grid points increase the resolution of the model produced by the subsequent analysis, with denser grids giving rise to a very large system of equations. Here, we evaluate the efficiency and resolution of several regular grids and show that traditionally defined grids tend to provide inadequate coverage in one region of the grid, while at the same time being computationally wasteful in other sections of the grid. We describe a rapid and systematic approach for generating efficient two-dimensional analysis grids that balance optimal information content and model resolution for a given signal-to-noise ratio with improved calculation efficiency. These findings are general and apply to one- and two-dimensional grids, although they no longer represent regular grids. We provide a recipe for an improved grid-point spacing in both directions which eliminates unnecessary points, while at the same time providing a more uniform resolution that can be scaled based on the stochastic noise in the experimental data.
Similar content being viewed by others
References
Brookes E, Demeler B (2006) Genetic algorithm optimization for obtaining accurate molecular weight distributions from sedimentation velocity experiments. In: Wandrey C, Cölfen H (eds) Analytical ultracentrifugation VIII, Progress in Colloid and Polymer Science, vol 131. Springer, Heidelberg, pp 78–82
Brookes E, Demeler B (2007) Parsimonious regularization using genetic algorithms applied to the analysis of analytical ultracentrifugation experiments. In: GECCO proceedings ACM 978-1-59593-697-4/07/0007
Brookes E, Demeler B (2010) UltraScan: improved 2DSA resolution with modified parameter space grids. Analytical ultracentrifugation symposium, Nottingham
Brookes E, Boppana RV, Demeler B (2006) Computing large sparse multivariate optimization problems with an application in biophysics. In: Supercomputing ‘06 ACM 0-7695-2700-0/06
Brookes E, Cao W, Demeler B (2010) A two-dimensional spectrum analysis for sedimentation velocity experiments of mixtures with heterogeneity in molecular weight and shape. Eur Biophys J 39(3):405–414
Demeler B (2010) Methods for the design and analysis of sedimentation velocity and sedimentation equilibrium experiments with proteins. Cur Protoc Prot Sci 7:7–13
Demeler B, Brookes E, Nagel-Steger L (2009) Analysis of heterogeneity in molecular weight and shape by analytical ultracentrifugation using parallel distributed computing. Method Enzymol 454:87–113
Demeler B, Nguyen TL, Gorbet GE, Schirf V, Brookes EH, Mulvaney P, El-Ballouli AO, Pan J, Bakr OM, Demeler AK, Hernandez Uribe BI, Bhattarai N, Whetten RL (2014) Characterization of size, anisotropy, and density heterogeneity of nanoparticles by sedimentation velocity. Anal Chem 86(15):7688–7695
Faxén H (1929) Über eine differentialgleichung aus der physikalischen chemie. Ark Mat Astr Fys 21B:1–6
Gorbet G, Devlin T, Uribe B, Demeler AK, Lindsey Z, Ganji S, Breton S, Weise-Cross L, Lafer EM, Brookes EH, Demeler B (2014) A parametrically constrained optimization method for fitting sedimentation velocity experiments. Biophys J 106(8):1741–1750. https://doi.org/10.1016/j.bpj.2014.02.022
Lamm O (1929) Die differentialgleichung der ultrazentrifugierung. Ark Mat Astr Fys 21B:1–4
Lawson CL, Hanson RJ (1974) Solving least squares problems. Prentice-Hall, New Jersey
Acknowledgements
This work was supported by NIH Grant GM120600 and NSF Grant NSF-ACI-1339649 (to BD). Supercomputer calculations were performed on Comet at the San Diego Supercomputing Center (support through NSF/XSEDE Grant TG-MCB070039 N to BD) and on Lonestar-5 at the Texas Advanced Computing Center (supported through UT Grant TG457201 to BD).
Author information
Authors and Affiliations
Corresponding author
Additional information
Special Issue: 23rd International AUC Workshop and Symposium.
Rights and permissions
About this article
Cite this article
Kim, H., Brookes, E., Cao, W. et al. Two-dimensional grid optimization for sedimentation velocity analysis in the analytical ultracentrifuge. Eur Biophys J 47, 837–844 (2018). https://doi.org/10.1007/s00249-018-1309-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00249-018-1309-z