Abstract
A non-contact measuring system is designed in this paper. In this system, a high-performance laser displacement senor and an additional turntable are integrated for acquiring the full dimensional data of complex surface. Due to the massive number of point clouds collected by the system, valid path planning methods are introduced in consideration of efficiency. As a result, the effectiveness of this system and measurement techniques for complex surface inspection are proved through various experiments.
Similar content being viewed by others
Availability of data and materials
The datasets used or analyzed during the current study are available from the corresponding author on reasonable request.
Code availability
Not applicable.
References
Leach R (2011) Optical measurement of surface topography[M]. Springer Berlin Heidelberg
Hocken RJ, Chakraborty N, Brown C (2005) Optical metrology of surfaces[J]. CIRP Ann 54(2):169–183
Sirohi RS, Kothiyal MP (2017) Optical components, systems, and measurement techniques[M]. Routledge
Jiang X (1973) Precision surface measurement[J]. Philosophical transactions of the Royal Society A: mathematical, physical and engineering sciences 2012(370):4089–4114
Gerhard C (2017) Optics manufacturing: components and systems[M]. CRC Press
Berkovic G, Shafir E (2012) Optical methods for distance and displacement measurements[J]. Advances in Optics and Photonics 4(4):441–471
Xie ZX, Wang JG, Zhang QM (2005) Complete 3D measurement in reverse engineering using a multi-probe system[J]. Int J Mach Tools Manuf 45(12–13):1474–1486
Ma XF, Cai ZQ, Yao B, Cai SJ, Lu J (2020) Analysis of factors affecting measurement accuracy and establishment of an optimal measurement strategy of a laser displacement sensor[J]. Appl Opt 59(33):10626–10637
Brosed FJ, Aguilar JJ, Guillomía D, Santolaria J (2011) 3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot[J]. Sensors 11(1):90–110
Guo YC, Sen Z, Gao C (2015) Development of a novel high-speed dynamic length measurement system for mobile and large-scale cylinder workpiece[J]. Proc Inst Mech Eng B J Eng Manuf 229(5):823–834
Benvegnù L (2017) 3D object recognition without CAD models for industrial robot manipulation[J]
Li QZ, Wang MH, Gu WK (2002) Computer vision based system for apple surface defect detection[J]. Comput Electron Agric 36(2–3):215–223
Neogi N, Mohanta DK, Dutta PK (2014) Review of vision-based steel surface inspection systems[J]. EURASIP Journal on Image and Video Processing 2014(1):1–19
Acosta D, García O, Aponte J (2006) Laser triangulation for shape acquisition in a 3D scanner plus scan[C]. Electronics, Robotics and Automotive Mechanics Conference (CERMA'06). IEEE 2:14–19
Jin W, Huang YQ (2006) Study on laser triangulation method measurement[J]. Journal of Sanming University 4
Schlarp J, Csencsics E, Schitter G (2019) Optical scanning of a laser triangulation sensor for 3-D imaging[J]. IEEE Trans Instrum Meas 69(6):3606–3613
Schlarp J, Csencsics E, Schitter G (2020) Design and evaluation of an integrated scanning laser triangulation sensor[J]. Mechatronics 72:102453
Nishikawa S, Ohno K, Mori M, Fujishima M (2014) Non-contact type on-machine measurement system for turbine blade[J]. Procedia Cirp 24:1–6
Xin MT, Li B, Wei X, Zhao Z (2021) Rapid registration method by using partial 3D point clouds[J]. Optik 246:167764
Xin MT, Li B, Yan X, Chen L, Wei X (2018) A robust cloud registration method based on redundant data reduction using backpropagation neural network and shift window[J]. Rev Sci Instrum 89(2):024704
Acknowledgements
We sincerely thank the anonymous reviewers for their valuable recommendations that enable us to improve this paper.
Funding
The work of this paper was partially supported by the National Natural Science Foundation of China under Grant 51875448, Aero Engine and Gas Turbine Major Project under Grant 2017–VII–0008, and Key industrial technology innovation projects of Suzhou SYG201922.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation, data collection, and analysis were performed by Meiting Xin, Bing Li, Menghui Lan, and Xiang Wei. The first draft of the manuscript was written by Meiting Xin, and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xin, M., Li, B., Li, L. et al. Measurement techniques for complex surface based on a non-contact measuring machine. Int J Adv Manuf Technol 121, 6991–7003 (2022). https://doi.org/10.1007/s00170-022-09803-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-022-09803-y