Abstract
This work presents an in-depth investigation of the influence of the individual laser sintering parameters on density, mechanical, and dimensional properties of carbon fiber–reinforced PA12 parts manufactured by selective laser sintering (SLS) . A space-filling design of experiments method was used to plan the experiments and SLS trials were conducted to manufacture test samples that were characterized in terms of dimensional accuracy, density, and mechanical properties. Gaussian process–supervised learning was used to model the interaction between laser sintering parameters and quality properties. Stochastic optimization via evolutionary algorithm was employed to obtain trade-off solutions for several multi-objective optimization tasks. The Gaussian process presented excellent model quality for the majority of response variables evaluated. Laser sintering parameters had a significant influence on physical and mechanical properties, exhibiting complex and non-linear behavior. Multi-objective optimization showed a wide range of optimized laser sintering parameters available, depending on the trade-off objective desired.
Similar content being viewed by others
References
Kruth JP, Wang X, Laoui T, Froyen L (2003) Lasers and materials in selective laser sintering. Assem Autom 23:357–371. https://doi.org/10.1108/01445150310698652
ASTM Standard F2792-12a (2012) Standard Terminology for additive manufacturing technologies. West Conshohocken, PA
Kruth J-P, Mercelis P, van Vaerenbergh J, Froyen L, Rombouts M (2005) Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J 11:26–36. https://doi.org/10.1108/13552540510573365
Wang X, Jiang M, Zhou Z, Gou J, Hui D (2017) 3D printing of polymer matrix composites: a review and prospective. Compos Part B 110:442–458. https://doi.org/10.1016/J.COMPOSITESB.2016.11.034
Goodridge RD, Tuck CJ, Hague RJM (2012) Laser sintering of polyamides and other polymers. Prog Mater Sci 57:229–267. https://doi.org/10.1016/j.pmatsci.2011.04.001
van de Werken N, Tekinalp H, Khanbolouki P, Ozcan S, Williams A, Tehrani M (2020) Additively manufactured carbon fiber-reinforced composites: state of the art and perspective. Addit Manuf 31:100962. https://doi.org/10.1016/j.addma.2019.100962
Kumar S, Kruth JP (2010) Composites by rapid prototyping technology. Mater Des 31:850–856. https://doi.org/10.1016/j.matdes.2009.07.045
Yan C, Hao L, Xu L, Shi Y (2011) Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering. Compos Sci Technol 71:1834–1841. https://doi.org/10.1016/j.compscitech.2011.08.013
Bai J, Goodridge RD, Yuan S, Zhou K, Chua C, Wei J (2015) Thermal influence of CNT on the polyamide 12 nanocomposite for selective laser sintering. Molecules 20:19041–19050. https://doi.org/10.3390/molecules201019041
Jing W, Hui C, Qiong W, Hongbo L, Zhanjun L (2017) Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder. Mater Des 116:253–260. https://doi.org/10.1016/j.matdes.2016.12.037
Jansson A, Pejryd L (2016) Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering. Addit Manuf 9:7–13. https://doi.org/10.1016/j.addma.2015.12.003
Liu Y, Zhu L, Zhou L, Li Y (2019) Microstructure and mechanical properties of reinforced polyamide 12 composites prepared by laser additive manufacturing. Rapid Prototyp J 25:1127–1134. https://doi.org/10.1108/RPJ-08-2018-0220
Salmoria GV, Paggi RA, Lago A, Beal VE (2011) Microstructural and mechanical characterization of PA12/MWCNTs nanocomposite manufactured by selective laser sintering. Polym Test 30:611–615. https://doi.org/10.1016/j.polymertesting.2011.04.007
Goodridge RD, Shofner ML, Hague RJM, McClelland M, Schlea MR, Johnson RB, Tuck CJ (2011) Processing of a polyamide-12/carbon nanofibre composite by laser sintering. Polym Test 30:94–100. https://doi.org/10.1016/j.polymertesting.2010.10.011
Espera A, Palaganas J, Chen Q et al (2019) 3D printing of a robust polyamide-12-carbon black composite via selective laser sintering: thermal and electrical conductivity OLED preparation and surface initiated polymerization view project 3D printing of covalent functionalized graphene oxide nanocomposite via stereolithography view project 3D printing of a robust polyamide-12-carbon black composite via selective laser sintering: thermal and electrical conductivity. Macromol Mater Eng. https://doi.org/10.1002/mame.201800718
Hong R, Zhao Z, Leng J, Wu J, Zhang J (2019) Two-step approach based on selective laser sintering for high performance carbon black/ polyamide 12 composite with 3D segregated conductive network. Compos Part B 176:107214. https://doi.org/10.1016/j.compositesb.2019.107214
Zhu W, Yan C, Shi Y, Wen S, Liu J, Wei Q, Shi Y (2016) A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites. Sci Rep 6:1–10. https://doi.org/10.1038/srep33780
EOS (2020) Material data center. http://eos.materialdatacenter.com/eo/en. Accessed 9 Jan 2020
ASTM Standard D638-02a (2002) Standard test method for tensile properties of plastics. West Conshohocken
ASTM Standard D790-02 (2002) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken
Cavazzuti M (2013) Optimization methods: from theory to design. Springer-Verlag, Berlin Heidelberg
Rasmussen CE, Williams CKI (2006) Rasmussen and Williams - Gaussian processes for machine learning
Rasmussen CE (2020) Web page. http://www.gaussianprocess.org/gpml/code/matlab/doc/. Accessed 19 Oct 2019
Storn RM, Kenneth P (1997) Differential evolution - a simple and efficient adaptive scheme for global optimization over continuous spaces. J Glob Optim 11:341–359. https://doi.org/10.1023/A:1008202821328
ASTM Standard D5947-11 (2012) Standard test methods for physical dimensions of solid plastics specimens
Laumer T, Stichel T, Nagulin K, Schmidt M (2016) Optical analysis of polymer powder materials for selective laser sintering. Polym Test 56:207–213. https://doi.org/10.1016/j.polymertesting.2016.10.010
Ribeiro N, Mattos D, Rodrigues C et al (2018) Azo dye adsorption on anthracite: a view of thermodynamics, kinetics and cosmotropic effects. Sep Purif Technol 209:806–814. https://doi.org/10.1016/j.seppur.2018.09.027
Herrin JM, Deming D (1996) Thermal conductivity of U.S. coals. J Geophys Res Solid Earth 101:25381–25386. https://doi.org/10.1029/96jb01884
Anestiev L, Froyen L (1999) Model of the primary rearrangement processes at liquid phase sintering and selective laser sintering due to biparticle interactions. J Appl Phys 86:4008–4017. https://doi.org/10.1063/1.371321
Kruth J-P, Levy G, Klocke F, Childs THC (2007) Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP Ann Manuf Technol 56:730–759. https://doi.org/10.1016/j.cirp.2007.10.004
Jauffrès D, Lame O, Vigier G, Doré F, Douillard T (2009) Sintering mechanisms involved in high-velocity compaction of nascent semicrystalline polymer powders. Acta Mater 57:2550–2559. https://doi.org/10.1016/j.actamat.2009.02.012
Dupin S, Lame O, Barrès C, Charmeau J-YY (2012) Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering. Eur Polym J 48:1611–1621. https://doi.org/10.1016/j.eurpolymj.2012.06.007
Funding
This study is financially supported by Financiadora de Estudos e Projetos (FINEP).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Czelusniak, T., Amorim, F.L. Selective laser sintering of carbon fiber–reinforced PA12: Gaussian process modeling and stochastic optimization of process variables. Int J Adv Manuf Technol 110, 2049–2066 (2020). https://doi.org/10.1007/s00170-020-05993-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-020-05993-5