Abstract
Finishing freeform complex surfaces with limited access has been raised as a challenging issue in advanced manufacturing industries. In this study, a new magnetic abrasive finishing (MAF) apparatus for finishing internal spiral grooves of a cylindrical tube is proposed. The MAF setup was installed on a CNC machine for performing experimental trials. A full factorial design approach was used and the results of the experiments were analyzed by analysis of variance (ANOVA) technique. Through this study, the effectiveness of finishing parameters including tool rotational speed, finishing time, and abrasive mesh number on the grooves’ surface roughness was investigated. Microscopic surface profiles and patterns demonstrate 70% improvement in the surface roughness.
Similar content being viewed by others
References
Lin CT, Yang LD, Chow HM (2007) Study of magnetic abrasive finishing in free-form surface operations using the Taguchi method. Int J Adv Manuf Technol 34(1–2):122–130
Singh DK, Jain VK, Raghuram V, Komanduri R (2005) Analysis of surface texture generated by a flexible magnetic abrasive brush. Wear 259(7):1254–1261
Kim JD (2003) Polishing of ultra-clean inner surfaces using magnetic force. Int J Adv Manuf Technol 21(2):91–97
Yamaguchi H, Shinmura T (1999) Study of the surface modification resulting from an internal magnetic abrasive finishing process. Wear 225:246–255
Givi M, Tehrani AF, Mohammadi A (2012) Polishing of the aluminum sheets with magnetic abrasive finishing method. Int J Adv Manuf Technol 61(9–12):989–998
Singh DK, Jain VK, Raghuram V (2004) Parametric study of magnetic abrasive finishing process. J Mater Process Technol 149(1):22–29
Khalaj Amineh S, Tehrani AF, Mohammadi A (2013) Improving the surface quality in wire electrical discharge machined specimens by removing the recast layer using magnetic abrasive finishing method. Int J Adv Manuf Technol 66(9–12):1793–1803
Khalaj Amineh S, Fadaei Tehrani A, Mosaddegh P, Mohammadi A (2015) A comprehensive experimental study on finishing aluminum tube by proposed UAMAF process. Mater Manuf Process 30(1):93–98
Mulik RS, Pandey PM (2011) Magnetic abrasive finishing of hardened AISI 52100 steel. Int J Adv Manuf Technol 55(5–8):501–515
Pashmforoush F, Rahimi A (2015) Nano-finishing of BK7 optical glass using magnetic abrasive finishing process. Appl Opt 54(9):2199–2207
Lee YH, Wu KL, Bai CT, Liao CY, Yan BH (2015) Planetary motion combined with two-dimensional vibration-assisted magnetic abrasive finishing. Int J Adv Manuf Technol 76(9–12):1865–1877
Du ZW, Chen Y, Zhou K, Li C (2015) Research on the electrolytic-magnetic abrasive finishing of nickel-based superalloy GH4169. Int J Adv Manuf Technol 81(5–8):897–903
Yamaguchi H, Srivastava AK, Tan M, Hashimoto F (2014) Magnetic abrasive finishing of cutting tools for high-speed machining of titanium alloys. CIRP J Manuf Sci Technol 7(4):299–304
Mao TF, Yang SC, Tsai FC, Hung JC, Yan BH (2010) Experimental investigation of abrasive jet polishing on the free-form machined surfaces of SKD61 mold steel using SiC particles. Mater Manuf Process 25(9):965–973
Sooraj VS, Radhakrishnan V (2013) Feasibility study on fine finishing of internal grooves using elastic abrasives. Mater Manuf Process 28(10):1110–1116
Jiao AY, Quan HJ, Li ZZ, Chen Y (2015) Study of magnetic abrasive finishing in seal ring groove surface operations. Int J Advan Manuf Technol :1–11
Yoon S, Tu JF, Lee JH, Yang GE, Mun SD (2014) Effect of the magnetic pole arrangement on the surface roughness of STS 304 by magnetic abrasive machining. Int J Precis Eng Manuf 15(7):1275–1281
Boggs T, Carroll R, Tran-Son-Tay R, Yamaguchi H, Al-Mousily F, DeGroff C (2014) Blood cell adhesion on a polymeric heart valve leaflet processed using magnetic abrasive finishing. Journal of Medical Devices 8(1):011005
Kang J, Yamaguchi H (2012) Internal finishing of capillary tubes by magnetic abrasive finishing using a multiple pole-tip system. Precis Eng 36(3):510–516
Jayswal SC, Jain VK, Dixit PM (2005) Modeling and simulation of magnetic abrasive finishing process. Int J Adv Manuf Technol 26(5–6):477–490
Jain VK, Jayswal SC, Dixit PM (2007) Modeling and simulation of surface roughness in magnetic abrasive finishing using non-uniform surface profiles. Mater Manuf Process 22(2):256–270
Hung CL, Ku WL, Yang LD (2010) Prediction system of magnetic abrasive finishing (MAF) on the internal surface of a cylindrical tube. Mater Manuf Process 25(12):1404–1412
Girma B, Joshi SS, Raghuram MV, Balasubramaniam R (2006) An experimental analysis of magnetic abrasives finishing of plane surfaces. Mach Sci Technol 10(3):323–340
Verma GC, Kala P, Pandey PM (2016) Experimental investigations into internal magnetic abrasive finishing of pipes. Int J Advan Manuf Technol :1–12
Madarkar R, Jain VK (2015) Parametric analysis of magnetic abrasive deburring process. International Journal of Precision Technology 5(2):128–139
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khalaj Amnieh, S., Mosaddegh, P. & Fadaei Tehrani, A. Study on magnetic abrasive finishing of spiral grooves inside of aluminum cylinders. Int J Adv Manuf Technol 91, 2885–2894 (2017). https://doi.org/10.1007/s00170-016-9970-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9970-9