Abstract
Distinct advantages of the combination of the pneumatic actuated plants with “on/off” solenoid valves have motivated many researchers to conduct research in this scope. Pulse-width modulation (PWM) is a tool to use such combination in servo tasks. This paper studies the most frequent and well-reported PWM schemes. These PWM schemes have been applied for positioning tasks of the pneumatic actuators using solenoid on/off valves. In this study, the positioning performance of the servo pneumatic system, utilizing different PWM schemes, is investigated through several experiments with step and sinusoidal reference inputs. Rise time, overshoot, and steady-state error, in step input tests, and tracking performance in sinusoidal tests demonstrate the effectiveness of the deployed PWM schemes in the pneumatic system behaviors. Moreover, the closed-loop results demonstrate that the system robustness against the increase of the system’s mass is associated with the applied PWM scheme. Based on the open-loop results, two factors are found to be affecting PWM schemes performance, namely, the difference in the cross-sectional areas on each side of the piston and the piston position, in which these factors have not been considered in the design procedure of the former studies. Taking into account the former factor, a modified version of the PWM schemes is proposed. Steady-state errors in closed-loop tests verify the effectiveness of the developed modified PWM schemes.
Similar content being viewed by others
References
Anderson BW (1967) Analysis and design of pneumatic systems. John Wiley and Sons, New York
Shih M, Ma M (1998) Position control of a pneumatic cylinder using fuzzy PWM control method. Mechatronics 8:241–253
van Varseveld RB, Bone GM (1997) Accurate position control of a pneumatic actuator using on/off solenoid valves. IEEE/ASME Trans Mechatron 2(3):195–204
Bobrow JE, Jabbari F (1991) Adaptive pneumatic force actuation and position control. ASME J Dyn Syst Meas Control 113(June):267–272
McDonell BW, Bobrow JE (1993) Adaptive tracking control of an air powered robot actuator. ASME J Dyn Syst Meas Control 115:427–433
Surgenor BW, Vaughan ND (1997) Continuous sliding mode control of a pneumatic actuator. ASME J Dyn Syst Meas Control 119:578–581
Richer E, Hurmuzlu Y (2000) A high performance pneumatic force actuator system: part II—nonlinear controller design. ASME J Dynam Syst Meas Control 122:426–434
Refaat S, Nahavandi S (2006) Nonlinear identification of pneumatic servo-drive. Int J Model Simul 26(1):11–16
Wang J, Wang DJD, Moore PR, Pu J (2001) Modelling study, analysis and robust servocontrol of pneumatic cylinder actuator systems. IEE Proc Control Theory Appl 148:35–42
Gao X, Feng ZJ (2005) Design study of an adaptive Fuzzy-PD controller for pneumatic servo system. J Control Eng Pract 13(1):55–65
Noritsugu T (1987) Development of PWM mode electro-pneumatic servo mechanism, part II: position control of a pneumatic cylinder. J Fluid Control 17(2):7–28
Sorli M, Pastorelli S (2000) Performance of a pneumatic force controlling servosystem: influence of valves conductance. J Robot Auton Syst 30:283–300
Linnett JA, Smith MC (1989) An accurate low-friction pneumatic position control system. Proc Inst Mech Eng B 203(33):159–165
Gentile A, Giannoccaro NI, Reina G (2002) Experimental tests on position control of a pneumatic actuator using on/off solenoid valves. In: Proceedings of Industrial Technology, 2002. IEEE ICIT '02. 2002 IEEE International Conference, IEEE 1:555–559. doi:10.1109/ICIT.2002.1189959
Paul AK, Mishra JK, Radke MG (1994) Reduce order sliding mode control for pneumatic actuator. IEEE Trans Control Syst Technol 2(3):271–276
Barth EJ, Zhang J, Goldfarb M (2002) Sliding mode approach to PWM-controlled pneumatic systems. In: Proceedings of the 2002. IEEE, American Control Conference, 3:2362–2367. doi:10.1109/ACC.2002.1023995
Shen X, Barth JE, Zhang J, Goldfarb M (2004) Nonlinear averaging applied to the control of pulse width modulated (PWM) pneumatic systems. In: Proceedings of the American Control Conference, IEEE Boston, MA, 5:4444–4448
Najafi F, Fathi M, Saadat M (2009) Performance improvement of a PWM-sliding mode position controller used in pneumatic actuation. Int J Autom Soft Comput 15(1):73–84
Ahn K, Yokota S (2005) Intelligent switching control of pneumatic actuator using on/off solenoid valves. Mechatronics 15:683–702
Shen X, Goldfarb M (2007) Simultaneous force and stiffness control of a pneumatic actuator. ASME J Dyn Syst Meas Control 129(4):425–434
Streeter VL, Victor L, Keith WB (1998) Fluid mechanics, 9th edn. WCB/McGraw-Hill, Boston
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shiee, M., Sharifi K., A., Fathi, M. et al. An experimental comparison of PWM schemes to improve positioning of servo pneumatic systems. Int J Adv Manuf Technol 82, 1765–1779 (2016). https://doi.org/10.1007/s00170-015-7501-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7501-8