Abstract
In this paper, the effect of laser on the welding process in metal inert gas (MIG) welding of aluminum alloys was studied exploiting high-speed imaging and welding electrical signals collecting. Bead-on-plate welding experiments were conducted using conventional short-circuiting transfer MIG welding and laser-short-circuiting transfer MIG hybrid welding. The obtained results point out that it took less time to strike the arc in laser-MIG hybrid welding, and the stability of arc striking was increased. When the laser was introduced into the arc atmosphere, the arc was compressed, and the welding energy was more concentrated. The arc cathode spot was fixed to the laser beam impinging spot, so the arc could burn stably. In laser-MIG hybrid welding, the droplet short-circuiting transfer stability and the weld appearance were improved significantly. Moreover, an analysis method of judging droplet transfer stability which bases on statistical techniques was proposed. By this method, it can be concluded that the short-circuiting transfer process became more stable in laser-MIG hybrid welding.
Similar content being viewed by others
References
Steen WM, Eboo M (1979) Arc augmented laser welding. Met Constr 11(6):332–333
Tusek J, Suban M (1999) Hybrid welding with arc and laser beam. Sci Technol Weld Join 4(5):308–311
Cui L, He D. Y, Li X. Y, Li X. T, Wang Z.H (2011) Effect of welding direction on weld shape of fisher laser-MIG hybrid welded titanium alloys. Chin J Laser 38(1):0103002
Mahrie A, Beyer E (2006) Hybrid laser beam welding-classification, characteristics, and applications. J Laser Appl 18(3):169–180
Zeng XY, Gao M, Yan J (2011) Effects of shielding gas in laser-arc hybrid welding. Chin J Laser 38(6):0601005
Stute U, Kling R, Hermsdort J (2007) Interaction between electrical arc and Nd:YAG laser radiation. Annals of the CIRP 56(1):197–200
Gao ZG, Wu YX, Huang J (2009) Analysis of weld pool dynamiac during stationary laser-MIG hybrid welding. Int J Adv Manuf Technol 44:870–879
Xu GX, Wu CS, Qin GL (2011) Adaptive volumetric heat source models for laser beam and laser plus pulsed GMAW hybrid welding processes. Int J Adv Manuf Technol 57:245–255
Zhang C, Li G, Gao M (2013) Microstructure and process characterization of laser-cold metal transfer hybrid welding of AA60601 aluminum alloy. Int J Adv Manuf Technol 68:1253–1260
Graf T, Staufer H (2003) Laser-hybrid welding drives VW improvements. Weld J 82(1):42–48
Hu B, Ouden GD (2006) Laser induced stabilization of the welding arc. Sci Technol Weld Join 10:76–81
Yang CL, Lin SB (2010) Bases of arc welding. Harbin Institute of Technology Press :36–37
Lei ZL, Chen YB, Li LQ, Wu L (2004) Characteristics of droplet transfer in CO2 laser-MIG hybrid welding with short-circuiting mode, ICNFT
Cai XY, Li H, Yang LJ, Gao Y (2014) The improved of weld appearance of laser-short circuiting transfer MIG hybrid welded aluminum alloys. Chin J Laser 41(5):0503001
Shinn BW, Farson DF, Denney PE (2005) Laser stabilization of arc cathode spots in titanium welding. Sci Technol Weld Join 10:475–481
Wang W, Lin SY, Wang XY (2012) Double electric conduction mechanism of Nd: YAG laser-Pulse MAG hybrid welding. Chin J Lasers 39(2):0203001
Peter JB, Richard AD (2011) Time series: theory and methods. China Higher Education Press Beijing and Springer-Verlag Berlin Heidelberg: 1∼28
Alessandro A, Alessandro F, Leonardo O, Giampaolo C (2012) The influence of process parameters on porosity formation in hybrid Laser-GMA welding of AA6082 aluminum alloy. Opt Laser Technol 44:1485–1490
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cai, X., Li, H., Wei, H. et al. Effect of laser on the welding process of short-circuiting transfer MIG welding of aluminum alloys. Int J Adv Manuf Technol 75, 1829–1836 (2014). https://doi.org/10.1007/s00170-014-6250-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6250-4