Abstract
Monitoring is an important part of manufacturing process control and management. It plays a crucial role in ensuring agility in a manufacturing system, process robustness, responsiveness to client demands, and achievement of a sustainable production environment. Recent developments in information systems and computer technology allows for the implementation of new philosophies that integrate various monitoring applications into one complex system connected through company-wide IT systems and with systems operating throughout the whole supply chain. This paper reviews developments in the area of advanced monitoring and integration. Research on new approaches, standards, developed solutions, and company applications are presented. New directions of research and development in all areas of advanced monitoring and implementation of recent IT solutions are discussed.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Coe N, Hess M (2013) Global production networks, labour and development. Geoforum 44:4–9
Teller J, Kock A (2013) An empirical investigation on how portfolio risk management influences project portfolio success. Int J Proj Manag 31:817–829
Mason R, Lalwani C (2008) Mass customised distribution. Int J Prod Econ 114:71–83
Yang LR (2013) Key practices, manufacturing capability and attainment of manufacturing goals: the perspective of project/engineer-to-order manufacturing. Int J Proj Manag 31(1):109–125
Herron C, Hicks C (2008) The transfer of selected lean manufacturing techniques from Japanese automotive manufacturing into general manufacturing (UK) through change agents. Robot Comput Integr Manuf 24:524–531
Van Veen-Dirks P (2005) Management control and the production environment: a review. Int J Prod Econ 93–94:263–272
Camarinha-Matos LM, Afsarmanesh H et al (2009) Collaborative networked organizations—concepts and practice in manufacturing enterprises. Comput Ind Eng 57:46–60
The Relocation of Production Activities (2005): Trends and drivers, The EU Economy, Review
Oborski P (2012) Transformations taking place in manufacturing companies. Inzynieria Maszyn R. 17(z. 1):7–16
Nagalingam S, Lin G (2008) CIM—still the solution for manufacturing industry. Robot Comput Integr Manuf 24:332–344
Wang L (2008) Wise-shop floor: an integrated approach for web-based collaborative manufacturing. IEEE Trans Syst Man Cybernet – Part C: Appl Rev 38(4):562–573
Gunasekaran H (1999) Agile manufacturing: a framework for research and development. Int J Prod Econ 62(8):7–105
Brussel HV, Wyns J, Valckenaers P, Bongaerts L (1998) Reference architecture for holonic manufacturing systems: PROSA. Comput Ind 37(3):255–274
Warnecke HJ (1993) The fractal company: a revolution in corporate culture. Springer, Berlin
Mun J, Ryu K, Jung M (2006) Self-reconfigurable software architecture: design and implementation. Comput Ind Eng 51:163–173
Dornfeld D (2012) Green manufacturing: fundamentals and applications. Springer, New York
Ahn SH, Chun DM, Chu WS (2013) Perspective to green manufacturing and applications. Int J Precis Eng Manuf 14(6):873–874
Byrne G, Dornfeld D, Inasaki I, Konig W, Teti R (1995) Tool condition monitoring—the status of research and industrial application. CIRP Ann 44(2):541–567
Teti R, Jemielniak K, O’Donnell G, Dornfeld D (2010) Advanced monitoring of machining operations. CIRP Ann Manuf Technol 59:717–739
Cheng K, Bateman RJ (2008) e-Manufacturing: characteristics, applications and potentials—review. Prog Nat Sci 18:1323–1328
Wu D, Greer MJ, Rosen D, Schaefer D (2013) Cloud manufacturing: strategic vision and state-of-the-art, J Manuf Syst, ISSN 0278–6125
Meier M, Seidelmann J, Mezgár I (2010) ManuCloud: the next-generation manufacturing as a service environment. Eur Res Cons Inform Math News 83:33–34
Metzger M, Polakow G (2011) A survey on applications of agent technology in industrial process control. IEEE Trans Ind Info 7:4
Campos J (2009) Development in the application of ICT in condition monitoring and maintenance. Comput Ind 60:1–20
Oliveira JF, Ferraz F, Coelho RT, Silva EJ (2008) Architecture for machining process and production based in open CNC. Proc IMechE J Eng Manuf 222(12):1605–1612
Jemielniak K (2012) Automatic tool condition monitoring. Inzynieria Maszyn R.17(z.1):17–29
Morel G, Valckenaers P et al (2007) Manufacturing plant control challenges and issues. Control Eng Pract 15:1321–1331
Park S (2004) High frequency bandwidth cutting force measurements in milling using the spindle force sensor system. PhD thesis, University of British Columbia, Vancouver, Canada
Hauser DP, de Weck OL (2007) Flexibility in component manufacturing systems: evaluation framework and case study. J Intell Manuf 18:421–432
Milberg J, Koch M (1994) Autonomous manufacturing systems—past, present and future of FMS. Manuf Syst 23(4):279–289
John M, Gross JM (2002) Fundamentals of preventive maintenance, AMACOM Div Am Mgmt Assn
Ribeiro L, Barata J (2011) Re-thinking diagnosis for future automation systems: an analysis of current diagnostic practices and their applicability in emerging IT based production paradigms. Comput Ind 62:639–659
Mishra RC (2006) Reliability and maintenance engineering, New Age Int
Muller A, Marquez AC, Iung B (2008) On the concept of e-maintenance: review and current research. Reliab Eng Syst Saf 93:1165–1187
Iung B, Levrat E, Marquez AC, Erbe H (2009) Conceptual framework for e-maintenance: illustration by e-maintenance technologies and platforms. Annu Rev Control 33:220–229
Persona A, Regattieri A, Pham H, Battini D (2007) Remote control and maintenance outsourcing networks and its applications in supply chain management. J Oper Manag 25:1275–1291
Jantunen E, Emmanouilidis C, Arnaiz A, Gilabert E (2010) Economical and technological prospects for e-maintenance. Int J Syst Assur Eng Manag 1(3):201–209
Lee J (1997) Strategy and challenges on remote diagnostics and maintenance for manufacturing equipment, Proc Ann Reliab Maintainability Symp, 368–370
Lee J (2001) A framework for web-enabled e-maintenance systems, Proc Second Int Symp Environ Conscious Des Inverse Manuf, 450–459
Sun JG, Yang XB, Huang D (2002) Multi-agent based distributed chemical process monitoring and diagnosis. Proc 2002 Int Conf Mach Learn Cybern 2:851–856
Kunze U (2003) Condition tele monitoring and diagnosis of power plants using web technology. Prog Nucl Energy 43:129–136
Wiliem L et al. (2006) Development of Internet based real-time water condition monitoring system. Proc 19th Intern Cong Exhibition Con Mon Diag Eng Man (COMADEM 2006), 119–129
Campos J, Jantunen E, Prakash O (2007) Development of a maintenance system based on web and mobile technologies. J Int Technol Info Manag 16(4):1–8
Wang W, Tse PW, Lee J (2007) Remote machine maintenance system through Internet and mobile communication. Int J Adv Manuf Technol 31(7–8):783–789
Fu C et al (2002) MAS-based model of intelligent control-maintenance-management system (ICMMS) and its application. Proc 2002 Intern Conf Mach Learn Cybern 1:376–380
Mangina E, McArthur S, McDonald J, Moyes A (2001) COMMAS (COndition-Monitoring Multi-Agent System). J Auton Agents Multi-Agent Syst 4:279–281
Byrne G, Dornfeld D, Denkena B (2004) Advancing cutting technology. CIRP Ann 52(2):483–507
Jun M, Ozdoganlar B, DeVor R, Kapoor S, Kirchheim K, Schaffner G (2002) Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations. Int J Mach Tools Manuf 42:741–751
Klocke F, Kratz S, Veselovac D, Arrazola P (2008) Investigation on force sensor dynamics & their measurement characteristics. International Mechanical Engineering Congress & Exp, Boston, pp 2–6
Klocke F, Wirtz G, Veselovac D (2008) Design approach for adaptive axial force control in gun drilling. ASME International Mechanical Eng. Congress and Expos, Boston
Salgado DR, Alonso FJ (2007) An approach based on current and sound signals for in-process tool wear monitoring. Int J Mach Tools Manuf 47:2140–2152
Korkut I (2003) A dynamometer design and its construction for milling operation. Mater Des 24:631–637
Smith DA, Smith S, Tlusty J (1998) High performance milling torque sensor. J Manuf Sci Eng 120:504–514
Davies M, Ueda T, M’Saoubi R, Mullany B, Cooke A (2007) On the measurement of temperature in material removal processes. CIRP Ann 56(02):581–604
Mannan M, Broms S (1992) Investigating the temperature dependence of motor current measurements applied to monitoring and adaptive control. CIRP Ann 41(1):451–454
Arrazola PJ, Arriola I, Davies MA, Cooke AL, Dutterer BS (2008) The effect of machinability on thermal fields in orthogonal cutting of AISI 4140 steel. CIRP Ann 57(1):65–68
Jemielniak K (2001) Some aspects of acoustic emission signal pre-processing. J Mater Process Technol 109:242–247
Donohue B, McCormac B, Geraghty D, O’Donnell GE (2008) An investigation into the development of surface acoustic wave (SAW) devices as strain sensors. 25th International Manufacturing Conference, Dublin, pp 575–582
Rogers L (1979) The application of vibration analysis and acoustic emission source location to on-line condition monitoring of anti-friction bearings. Tribol Int, 51–59
Alonso F, Salgado D (2008) Analysis of the structure of vibration signals for tool wear detection. Mech Syst Signal Process 22:735–748
Mannan M, Kassim A, Jing M (2000) Application of image and sound analysis techniques to monitor the condition of cutting tools. Pattern Recogn Lett 21:969–979
Lee DJ, Kim SH, Ahn JH (2004) Breakage detection of small-diameter tap using vision system in high-speed tapping machine with open architecture controller. KSME Int J 18(7):1055–1061
Dimla DE (2000) Sensor signals for tool-wear monitoring in metal cutting: a review of methods. Int J Mach Tools Manuf 40:1073–1098
Kuljanic E, Sortino M, Totis G (2009) Development of an intelligent multisensor chatter detection in milling. Mech Syst Signal Process 23(5):1704–1718
Klocke F, Kuljanic E, Wirtz G, Totis G, Veselovac D, Sortino M (2008) Development of an intelligent cutter for face milling. International Conference AMST ‘08, Udine
Auchet S, Chevrier P, Lacour M, Lipinski P (2004) A new method of cutting force measurement based on command voltages of active electro-magnetic bearings. Int J Mach Tools Manuf 44:1441–1449
Shinno H, Hashizume H (2003) Sensor-less monitoring of cutting force ultraprecision machining. CIRP Ann 52(1):303–305
Verl A, Heisel U, Walther M, Maier D (2009) Sensorless automated condition monitoring for the control of the predictive maintenance of machine tools. CIRP Ann 58:375–378
Franco-Gasca LA (2006) Sensorless tool failure monitoring system for drilling machines. Int J Mach Tools Manuf 46:381–386
Jemielniak K, Bombiński S (2006) Hierarchical strategies in tool wear monitoring. Proc IMechE 220/B:375–381
Jemielniak K, Teti R, Kossakowska J, Segreto T (2006) Innovative signal processing for cutting force based chip form prediction, 2nd Virtual Int Conf. IPROMS, 7–12
Abu-Zahra N, Yu G (2000) Analytical model for tool wear monitoring in turning operations using ultrasound waves. Int J Mach Tool Manuf 40:1619–1635
Abellan-Nebot J, Subirón R (2010) A review of machining monitoring systems based on artificial intelligence process models. Int J Adv Manuf Technol 47:237–257
Caralon T, Kidd S, Hand D, Wilcox S, Wilkinson P, Barton J, Jones J, Reuben R (1997) AE monitoring of tool wear during the face milling of steels and aluminium alloys using a fibre optic sensor, part 1: energy analysis. IMechE 211:299–309
Jeong Y-H, Cho D-W (2002) Estimating cutting force from rotating and stationary feed motor currents on a milling machine. Int J Mach Tools Manuf 42:1559–1566
Scheffer C, Heyns P (2004) An industrial tool wear monitoring system for interrupted turning. Mech Syst Signal Process 18:1219–1242
Li X, Ouyang G, Liang Z (2008) Complexity measure of motor current signals for tool flute breakage detection in end milling. Int J Mach Tools Man 48:371–379
Chen X, Li B (2007) AE method for tool condition monitoring based on wavelet analysis. Int J Adv Manuf Technol 33:968–976
Kunpeng Z, Wong YS, Hong GS (2009) Wavelet analysis of sensor signals for tool condition monitoring—a review and some new results. Int J Mach Tools Manuf 49:537–553
Jemielniak K, Bombinski S, Aristimuno P (2008) Tool condition monitoring in micromilling based on hierarchical integration of signal measures. CIRP Ann 57(1):121–124
Zhu K, Wong YS, Hong GS (2009) Multi-category micro-milling tool wear monitoring with continuous hidden Markov models. Mech Syst Signal Proc 23:547–560
Gandarias E, Dimov S, Pham DT, Ivanov A, Popov K, Lizarralde R, Arrazola PJ (2006) New methods for tool failure detection in micromilling. Proc IMechE 220(2):137–144
Venuvinod PK, Djordjevich A (1996) Towards active chip control. CIRP Ann 45(1):83–86
Grzesik W, Bernat P (1998) An investigation of the cutting process for chip breaking monitoring in turning of steels. J Manuf Sci Eng 120(3):555–562
Tangjitsitcharoen S (2009) In-process monitoring and detection of chip formation and chatter for CNC turning. J Mater Process Technol 209(10):4682–4688
Teti R, Jawahir I, Jemielniak K, Segreto T, Chen S, Kossakowska J (2006) Chip form monitoring through advanced processing of cutting force sensor signals. CIRP Ann 55(1):75–80
D’Addona D, Keshari A, Teti R (2008) Spectrum estimation and processing of cutting force sensor signals for chip form monitoring and classification, 4th Virtual International Conference on IPROMS, 555–560
Byrne G, O’Donnell G (2007) An integrated force sensor solution for process monitoring of drilling operations. CIRP Ann 56(01):89–92
Karpuschewski B, Wehmeier M, Inasaki I (2000) Grinding monitoring system based on power and AE sensing. CIRP Ann 49(1):235–240
Song DY, Otani N, Aoki T, Kamakoshi Y, Ohara Y, Tamaki H (2005) A new approach to cutting state monitoring in end-mill machining. Int J Mach Tools Manuf 45:909–921
Yoon M, Chin D (2005) Cutting force monitoring in the endmilling operation for chatter detection. J Eng Manuf 219(B):455–645
Shi D, Axinte D, Gindy N (2007) Development of an online machining process monitoring system: a case study of the broaching process. Int J Adv Manuf Technol 34(1–2):34–46
Rubio EM, Teti R (2009) Cutting parameters analysis for the development of a milling process monitoring system based on audible energy sound. J Intell Manuf 20(1):43–54
Abouelatta O, Madl J (2001) Surface roughness prediction based on cutting parameters and tool vibration in turning. J Mater Process Technol 118:269–277
Axinte D, Gindy N, Fox K, Unanue I (2004) Process monitoring to assist the workpiece surface quality in machining. Int J Mach Tools Manuf 44:1091–1098
Guo Y, Ammula S (2005) Real-time AE monitoring for surface damage in hard machining. Int J Mach Tools Manuf 45:1622–1627
Chang HK, Kim JH, Kim H, Jang DY, Han DC (2007) In-process surface roughness prediction using displacement signals from spindle motion. Int J Mach Tools Manuf 47:1021–1026
Marinescu I, Axinte D (2008) A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations. Int J Mach Tools Manuf 48:1148–1160
Salgado DR, Alonso FJ, Cambero I, Marcelo A (2009) In-process surface roughness prediction system using cutting vibrations in turning. Int J Adv Manuf Technol 43:40–51
Marinescu I, Axinte D (2009) A time–frequency AE-based monitoring technique to identify workpiece surface malfunctions in milling with multiple teeth cutting simultaneously. Int J Mach Tools Manuf 49:53–65
Tansel I, Yapici A (2013) Part based process performance monitoring (PbPPM). J Manuf Process 15:329–337
Van Houten F, Kimura F (2000) The virtual maintenance system: a computer-based support tool for robust design product monitoring. Fault Diagn Maint Plan CIRP Ann 49(1):91–94
Choudhury S (2001) On-line monitoring of tool wear & control of dimensional inaccuracy in turning. J Manuf Sci Eng 123(1):10–12
Axinte D, Gindy N (2004) Assessment of the effectiveness of a spindle power signal for tool condition monitoring in machining processes. Int J Prod Res 42:2679–2691
O’Donnell GE, Kelly K, Byrne G (2000) Use of a sensor integrated motor spindle for monitoring of a flexible machining centre, 2nd edn. IRP Int. Sem. On ICME, Capri, pp 383–388
Saravanan S, Yadava G, Rao P (2006) Condition monitoring studies on spindle bearing of a lathe. Int J Adv Manuf Technol 28:993–1005
Quintana G, Garcia-Romeu ML, Ciurana J (2011) Surface roughness monitoring application based on artificial neural networks for ball-end milling operations. J Intell Manuf 22:607–617
Marinescu V, Constantin I, Apostu C, Marin FB, Banu M, Epureanu A (2011) Adaptive dimensional control based on in-cycle geometry monitoring and programming for CNC turning center. Int J Adv Manuf Technol 55:1079–1097
Kruger M, Denkena B (2013) A model-based approach for monitoring of shape deviations in peripheral milling. Int J Adv Manuf Technol 67:2537–2550
Segreto T, Teti R, Neugebauer R, Schmidt G (2009) Machinability assessment in turning of NiTi through acceleration sensor monitoring. 2nd Int. Researchers Symp. on IPROMS, Ischia, pp 75–80
Vijayaraghavana A, Dornfeld D (2010) Automated energy monitoring of machine tools. CIRP Ann Manuf Technol 59(1):21–24
Hayashi M, Yoshioka H, Shinno H (2008) An adaptive control of ultraprecision machining with an in-process micro-sensor. J Adv Mech Des Syst Manuf 2(3):322–331
Teti R, Segreto T (2008) Sensor monitoring for cutting process optimisation of low machinability materials. 5th Chemnitz Colloq. on Prod. Techn. CPK, Chemnitz, pp 237–256
Kim HY, Ahn JH (2002) Chip disposal state monitoring in drilling using neural network based spindle motor power sensing. Int J Mach Tools Manuf 42(10):1113–1119
Axinte D (2006) Approach into the use of probabilistic neural networks for automated classification of tool malfunctions in broaching. Int J Mach Tools Manuf 46(12–13):1445–1448
Haykin S (2008) Neural networks & learning machines. Prentice-Hall, New York
Achichea S, Balazinski M, Baron L, Jemielniak K (2002) Tool wear monitoring using genetically-generated, fuzzy knowledge bases. Eng Appl Artif Intell 15:03–314
Balazinski M, Jemielniak K (1998) Tool conditions monitoring using fuzzy decision support system, V CIRP International Conference on Monitoring and Automatic Supervision in Manufacturing AC’ 98, Miedzeszyn, 115–122
Ahn J, Shen Y, Kim H, Jeong H, Cho K (2001) Development of a sensor information integrated expert system for optimizing die polishing. Robot CIM 17(4):269–276
Oborski P (2003) Social-technical aspects in modern manufacturing. Int J Adv Manuf Technol 22(Nr 11&12):848–854
Oborski P (2004) Man–machine interactions in advanced manufacturing systems. Int J Adv Manuf Technol 23:227–232
Martinsena K, Holtskoga H, Larssona CE (2012) Social aspects of process monitoring in manufacturing systems, 45th CIRP conference on manufacturing systems. Proced CIRP 3:567–572
Oborski P (2013) Integration of process and machine tools monitoring based on advanced information systems, Mechanik, Nr. 8-9, p.411-418/714, ISSN 0025–6552
Mourtzis D (2011) Internet based collaboration in the manufacturing supply chain. CIRP J Manuf Sci Technol 4:296–304
Wang J, Tse P, He LS, Yeung R (2004) Remote sensing, diagnosis and collaborative maintenance with web-enabled virtual instruments and mini-servers. Int J Adv Manuf Technol 24(9–10):764–772
Jovane F, Koren Y, Boer CR (2003) Present and future of flexible automation: towards new paradigms. Ann CIRP 52(2):543–560
Zhou ZD, Chen YP, Fuh JY, Nee AY (2000) Integrated condition monitoring and fault diagnosis for modern manufacturing systems. CIRP Ann 49(1):387–390
Vyroubal J (2012) Compensation of machine tool thermal deformation in spindle axis direction based on decomposition method. Precis Eng 36:121–127
Jemielniak K (1999) Commercial tool condition monitoring systems. Int J Adv Manuf Technol 15:711–721
Szulewski P (2012) Communication methods for data interchange between machine tool control system and monitoring equipment. Inzynieria Maszyn R. 17(z. 2):74–83
Carpanzano FJ (2007) Advanced automation solutions for future adaptive factories. Ann CIRP 56(1):435–438
Susanu M, Dumur D (2006) Hierarchical predictive control within an open architecture virtual machine tool. CIRP Ann Manuf Technol 55(1):389–392
Kistler Company (2012) Measuring and analyzing pressure, force and acceleration. Kistler Company, Winterhur
http://www.prometec.de/EN/download_machining.html. Verified: 25.11.2013
Kurp T, Gao R, Sah S (2012) Adaptive sensing for energy-efficient manufacturing system and process monitoring. CIRP J Manuf Sci Technol 5(4):328–336
Vellekoop JM, Jakoby B, Chabicovsky R (2003) Development trends in the field of sensors. e&i Elektrotechnik und Informationstechnik 120(11):388–394
Shams S, Lee JY, Han C (2012) Compact and lightweight optical torque sensor for robots with increased range. Sensors Actuators A 173:81–89
ZuDe Z, Quan L, QingSong A, Cheng X (2011) Intelligent monitoring and diagnosis for modern mechanical equipment based on the integration of embedded technology and FBGS technology. Measurement 44:1499–1511
Martin J (2010) Commercial MEMS case studies: market drivers, designs, materials and processes. Int J Adv Eng Sci Appl Math 2(1–2):23–27
Pryputniewicz RJ (2012) Current trends and future directions in MEMS. Exp Mech 52:289–303
Zhang Y, Gu Y, Vlatkovic V, Wang X (2004) Progress of smart sensor and smart sensor networks, IEEE Publications, 3600–3606
Mekid S, Pruschek P, Hernandez J (2009) Beyond intelligent manufacturing: a new generation of flexible intelligent NC machines. Mech Mach Theory 44:466–476
Lange D (2004) Systems and strategies for control-system-integrated process and machine condition monitoring. CIRP International Conference on High Performance Cutting, Aachen
Ferraz F, Coelho RT (2005) Data acquisition and monitoring in machine tools with CNC of open architecture using internet. Adv Manuf Technol 26:90–97
Cheng T (2003) Intelligent machine tools in a distributed network manufacturing mode environment. Int Adv Manuf Technol 17(3):221–232
Pritschow G, Kramer C (2005) Open system architecture for drives. CIRP Ann Manuf Technol 54(1):375–378
Desforges X, Archimede B (2006) Multi-agent framework based on smart sensors/actuators for machine tools control and monitoring. Eng Appl Artif Intell 19(6):641–655
Morales-Velazquez L, Romero-Troncoso RJ et al (2010) Open-architecture system based on a reconfigurable hardware–software multi-agent platform for CNC machines. J Syst Archit 56:407–418
Laplante PA (2004) Real-time systems design and analysis. Wiley, New York
Ceden W, Laplante PA (2007) An overview of real-time operating systems. Technol Rev JALA 12:40–45
Kopetz H (2011) Real-time systems, design principles for distributed embedded applications, 2nd edn. Springer, New York
Kleinjohann B (2004) Design methods and applications for distributed embedded systems. Springer, New York
Long YH, Zhou ZD et al (2009) Embedded-based modular NC systems. Int J Adv Manuf Technol 40:749–759
Lampka K, Perathoner S, Thiele L (2010) Analytic real-time analysis and timed automata: a hybrid methodology for the performance analysis of embedded real-time systems. Des Autom Embed Syst 14:193–227
Pereira CE, Carro L (2007) Distributed real-time embedded systems: recent advances, future trends and their impact on manufacturing plant control. Annu Rev Control 31:81–92
Vijayaraghavan A, Sobel W, Fox A, Dornfeld D, Warndorf P (2008) Improving machine tool interoperability using standardized interface protocols: MTConnect. Int. Symposium on Flexible Automation, ASME, Atlanta, pp 23–26
Campos JG, Miguez LR (2011) Standard process monitoring and traceability programming in collaborative CAD/CAM/CNC manuf. scenarios. Comput Ind 62(I 3):311–322
Ridwan F, Xu X (2013) Advanced CNC system with in-process feed-rate optimisation. Robot Comput Integr Manuf 29(3):12–20
Erl T, Puttini R, Mahmood Z (2013) Cloud computing: concepts, technology & architecture. Prentice Hall, New York
Mell P, Grance T (2011) The NIST definition of cloud computing, National Institute of Standards and Technology, U.S. Department of Commerce
Zhang L., Luo Y., Tao F., Li B.H., Ren L., Zhang X (2012) Cloud manufacturing: a new manufacturing paradigm, Enterprise Information Systems, 1–21
Xu X (2011) From cloud computing to cloud manufacturing. Robot Comput Integr Manuf Syst. doi:10.1016/j.rcim.2011.07.002
Wang L (2013) Machine availability monitoring and machining process planning towards Cloud manufacturing. CIRP J Manuf SciTechn 6(4):263–273
Nagorny K, Colombo AW, Schmidtmann U (2012) A service- and multi-agent-oriented manufacturing automation architecture An IEC 62264 level 2 compliant implementation. Comput Ind 63:813–823
Robert J. Benjamin, J (1992) Blunt, critical IT issues: the next ten years. Sloan Manag Rev, 7–19
Dewire DT (1994) Client/server computing. McGraw-Hill, New York
Boar BH (1994) Implementing client/server computing. McGraw-Hill, New York
Bongaerts L, Monostori L, McFarlane D, Kadar B (1998) Hierarchy in distributed shop flor control. Proc of the First Intern Workshop on Intelligent Manuf. Systems, Lausanne, pp 97–113
Laplante PA, Ovaska SJ (2011) Real-time systems design and analysis: tools for the practitioner. Wiley, New York
Boyer SA (2010) SCADA: supervisory control and data acquisition, 4th edition, ISA International Society of Automation
Barana O, Barbato P et al (2010) Comparison between commercial and open-source SCADA packages—a case study. Fusion Eng Des 85:491–495
Nguyen H, Rivas R, Nahrstedt K (2011) iDSRT: integrated dynamic soft real-time architecture for critical infrastructure data delivery over WLAN. Mob Netw Appl 16:96–108
Nicholson A et al (2012) SCADA security in the light of cyber-warfare. Comput Secur 31:418–436
Brandl D, Owen P (2001) A tutorial on the ANSI/ISA95 Enterprise/Control BR&L Consulting. www.brlconsulting.com/…/2003-09%20IEE%20, Dennis Brandl Peter Owen. BR&L Consulting Eli Lilly&Co
Ryu DH, Kim HJ, Um K (2009) Reducing security vulnerabilities for critical infrastructure. J Loss Prev Process Ind 22:1020–1024
Karnouskos S, Colombo AW (2011) Architecting the next generation of service-based SCADA/DCS system of systems. Proc. of the 37th IEEE Annual Conf. on Industrial Electronics (IECON ‘11), Melbourne
Sen S (1997) Multiagent systems: milestones and new horizons. Trends Cogn Sci 1(9):334–340
Oborski P (2010) Multiagent shop floor control. Adv Manuf Sci Technol 34(3):61–72
Tatara A, Cinar A, Seymour F (2007) Control of complex distributed systems with distributed intelligent agents. J Process Control 17:415–427
Monostori L, Vancza J, Kumara SRT (2006) Agent-based systems for manufacturing. Ann CIRP 55(2):697–720
Garcia-Fornes A, Hubner JF (2011) Infrastructures and tools for multiagent systems for the new generation of distributed systems. Eng App Artif Intel 24:1095–1097
Molina A, Rodriguez CA et al (2005) Next-generation manufacturing systems: key research issues in developing and integrating reconfigurable and intelligent machines. Int J Comput Integr Manuf 18(7):525–536
Lim MK, Zhang DZ (2004) An integrated agent-based approach for responsive control of manufacturing resources. Comput Ind Eng 46:221–232
Marik V, McFarlane D (2005) Industrial adoption of agent-based technologies. IEEE Intell Syst 20(1):27–35
Shen W, Hao Q, Yoon HJ, Norrie DH (2006) Applications of agent-based systems in intelligent manufacturing: an updated review. Adv Eng Inform 20:415–431
Leitao P (2009) Agent-based distributed manufacturing control: a state-of-the-art survey. Eng Appl Artif Intell 22:979–991
Wang LC, Lin SK (2009) A multi-agent based agile manufacturing planning and control system. Comput Ind Eng 57:620–640
Barbati M, Bruno G, Genovese A (2012) Applications of agent-based models for optimization problems: a literature review. Expert Syst Appl 39:6020–6028
Vitabile S, Conti V, Militello C, Sorbello F (2009) An extended JADE-S based framework for developing secure multi-agent systems. Comput Stand Interfaces 31:913–930
FIPA (www.fipa.org/)
Lee J, Ni J et al (2006) Intelligent prognostics tools and e-maintenance. Comput Ind 57(6):476–489
Chen KY, Chen CJ (2010) Applying multi-agent technique in multi-section flexible manufacturing system. Expert Syst Appl 37:7310–7318
Mangina E, McArthur S, McDonald J (2000) Autonomous agents for distributed problem solving in condition monitoring. Lect Notes Comput Sci, 683–692
Collis J, Ndumu D (1999) The Zeus agent building toolkit-ZEUS Technical Manual, British Telecommunication
Mangina E, McArthur S, McDonald J, Moyes A (2001) A multi agent system for monitoring industrial gas turbine start-up sequences. IEEE Trans Power Syst 16:396–401
McArthur SD, Strachan SM, Jahn G (2004) The design of a multi-agent transformer condition monitoring system. IEEE Trans Power Syst 19(4):1845–1852
Sayed MS, Lohse N (2013) Distributed Bayesian diagnosis for modular assembly systems—a case study. J Manuf Syst 32:480–488
Ribeiro L et al (2010) An agent-based interaction-oriented shop floor to support emergent diagnosis. IEEE International Conference on Industrial Informatics, Osaka
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
About this article
Cite this article
Oborski, P. Developments in integration of advanced monitoring systems. Int J Adv Manuf Technol 75, 1613–1632 (2014). https://doi.org/10.1007/s00170-014-6123-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6123-x