Abstract
This paper proposes a fault-tolerant control solution for the induction motor drive against total current sensor failures. An improved proposal based on the combination of the measured current signal and its delay signal is applied to diagnose the fault of the current sensors in various conditions. The state of the current sensors is determined by the diagnosis method during the operation of the induction motor. In normal conditions, measured current signals will be supplied to the field-oriented control loop for motor speed control. In contrast, the estimated current signals will be used to replace measured currents when the sensor fault state is determined. The performance of the fault-tolerant control solution will be verified through simulations under various changing load conditions in the Matlab/Simulink environment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Araújo RE (ed) (2012) Induction motors: Modelling and control. BoD–Books on Demand
Neborak I, Sladecek V, Kuchar M (2015) Modelling and simulation of induction machine and frequency converter considering power losses. In: 2015 16th international scientific conference on electric power engineering (EPE). IEEE, pp 251–255
Vo HH, Kuchar M, Brandstetter P (2020) Application of fuzzy logic in sensorless induction motor drive with PWM-DTC. Electr Eng 102(1):129–140
Kuchar M, Brandstetter P, Kaduch M (2004) Sensorless induction motor drive with neural network. In: 2004 IEEE 35th annual power electronics specialists conference (IEEE Cat. No. 04CH37551), vol 5. IEEE, pp 3301–3305
Elgbaily M, Anayi F, Packianather M (2022) Performance improvement based torque ripple minimization for direct torque control drive fed induction motor using fuzzy logic control. In: Control, instrumentation and mechatronics: theory and practice. Springer, Singapore, pp 416–428
Mon-Nzongo DL, Jin T, Ekemb G, Bitjoka L (2017) Decoupling network of field-oriented control in variable-frequency drives. IEEE Trans Industr Electron 64(7):5746–5750
Li W, Xu Z, Zhang Y (2019) Induction motor control system based on FOC algorithm. In: 2019 IEEE 8th joint international information technology and artificial intelligence conference (ITAIC). IEEE, pp 1544–1548
Popov A, Lapshina V, Briz F, Gulyaev I (2017) Dynamic operation of FOC induction machines under current and voltage constraints. In: 2017 19th European conference on power electronics and applications (EPE’17 ECCE Europe). IEEE, pp P-1
Toliyat HA, Levi E, Raina M (2003) A review of RFO induction motor parameter estimation techniques. IEEE Trans Energy Convers 18(2):271–283
Gouichiche A, Safa A, Chibani A, Tadjine M (2020) Global fault-tolerant control approach for vector control of an induction motor. Int Trans Electr Energy Syst 30(8):e12440
Tran CD, Palacky P, Kuchar M, Brandstetter P, Dinh BH (2021) Current and speed sensor fault diagnosis method applied to induction motor drive. IEEE Access 9:38660–38672
Kuchar M, Palacky P, Simonik P, Strossa J (2021) Self-tuning observer for sensor fault-tolerant control of induction motor drive. Energies 14(9):2564
Azzoug Y, Menacer A, Pusca R, Romary R, Ameid T, Ammar A (2018) Fault tolerant control for speed sensor failure in induction motor drive based on direct torque control and adaptive stator flux observer. In: 2018 International conference on applied and theoretical electricity (ICATE). IEEE, pp 1–6
Tran CD, Brandstetter P, Nguyen MCH, Ho SD, Bach HD, Pham PN (2020) A robust diagnosis method for speed sensor fault based on stator currents in the RFOC induction motor drive. Int. J. Electr. Comput. Eng. 10(3):3035
Najafabadi TA, Salmasi FR, Jabehdar-Maralani P (2010) Detection and isolation of speed-, DC-link voltage-, and current-sensor faults based on an adaptive observer in induction-motor drives. IEEE Trans Industr Electron 58(5):1662–1672
Chakraborty C, Verma V (2014) Speed and current sensor fault detection and isolation technique for induction motor drive using axes transformation. IEEE Trans Industr Electron 62(3):1943–1954
Wu F, Zhao J, Liu Y, Cao W (2016) A real-time sensor fault detection, isolation and reconfiguration method for vector controlled induction motors based on Extended Kalman Filter. In: 2016 International symposium on power electronics, electrical drives, automation and motion (SPEEDAM). IEEE, pp 617–624
Vu QS, Tran CD, Dinh BH, Dong CST, Huynh HT, Phan H (2021) A current sensor fault diagnosis method based on phase angle shift technique applying to induction motor drive. Int J Power Electron Drive Syst 13(3):1315–1325
Ho SD, Brandstetter P, Palacky P, Kuchar M, Dinh BH, Tran CD (2021) Current sensorless method based on field-oriented control in induction motor drive. J Electr Syst, 17(1)
Azzoug Y, Pusca R, Sahraoui M, Ammar A, Romary R (2019) A single observer for currents estimation in sensor’s fault-tolerant control of induction motor drives. In: 2019 International conference on applied automation and industrial diagnostics (ICAAID), vol 1.. IEEE, pp 1–6
Acknowledgements
Authors thank Ton Duc Thang University, Vietnam Aviation Academy, and VSB-Technical University of Ostrava for supporting this paper.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Nguyen, M.C.H., Tran, C.D., Dinh, B.H., Phan, T.T., Nguyen, T.T., Lai, G.T.T. (2024). A Current Sensor Fault-Tolerant Control Solution for Induction Motor Drive. In: Trong Dao, T., Hoang Duy, V., Zelinka, I., Dong, C.S.T., Tran, P.T. (eds) AETA 2022—Recent Advances in Electrical Engineering and Related Sciences: Theory and Application. AETA 2022. Lecture Notes in Electrical Engineering, vol 1081. Springer, Singapore. https://doi.org/10.1007/978-981-99-8703-0_21
Download citation
DOI: https://doi.org/10.1007/978-981-99-8703-0_21
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-8702-3
Online ISBN: 978-981-99-8703-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)