Abstract
Wood-based materials, such as medium-density fiberboard (MDF) and oriented strand board (OSB), are increasingly being used in a variety of applications due to their unique properties and environmental benefits. MDF is made from wood fibers that are bonded together with a synthetic resin, whereas OSB is made from wood strands that are oriented in specific directions and bonded together with an adhesive system. Both MDF and OSB are versatile and durable materials that offer a number of advantages over traditional wood products. They are also more environmentally friendly, as they can be made from recycled wood fibers, which promote the cascading usage of wood-based products thus maximizing their value and minimizing waste. Eucalyptus timber is a particularly suitable raw material for MDF and OSB production, as it has a fast growth rate, high density, and fine texture. Thus, this chapter provides an overview of the mechanical and physical attributes of Eucalyptus panels made from different timber species and various processing parameters. The factors affecting their properties are also highlighted and discussed. This chapter also covers the general manufacturing process and the applications of Eucalyptus MDF and OSB in the multiple sectors. Limitations, challenges dealing with the manufacturing and applications of eucalyptus MDF and OSB in the construction industries and the future prospect are also discussed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arbec Forest Production (2023) Process for the Production of OSB. https://www.arbec.ca/en/products/manufacturing-process
Barata TQF, Rodrigues OV, Matos BM, Pinto RS (2016) Furniture design using MDF boards applying concepts of sustainability. Prod: Manag Dev 14(1):68–83
Brito JO, Silva FG, Leão MM, Almeida G (2008) Chemical composition changes in Eucalyptus and Pinus woods submitted to heat treatment. Bioresour Technol 99:8545–8548
Campos CID, Lahr FAR (2004) Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin. Mater Res 7:421–425
Da Rosa TS, Trianoski R, Iwakiri S, Bonduelle GM (2017a) Use of five eucalyptus species for particleboards manufacture. Revista Árvore 41(2):e410215
Dazmiri M, Kiamahalleh M, Dorieh A, Pizzi A (2019) Effect of the initial F/U molar ratio in urea-formaldehyde resins synthesis and its influence on the performance of medium density fiberboard bonded with them. Int J Adhes Adhes 95:102440. https://doi.org/10.1016/j.ijadhadh.2019.102440
Domingos BEM, de Melo Moura JD (2019) Viabilty of eucalyptus bark for the composition of OSB panels. BioResources 14(4):9472–9484
Fan M, Fu F (2017) Introduction: a perspective–natural fibre composites in construction. In Advanced high strength natural fibre composites in construction. Woodhead Publishing, pp 1–20
Foelkel C (2006) Casca da Arvore do Eucalipto: Aspectos Morfológicos, Fisiológicos, Florestais, Ecológicos e Industriais, Visando a Produção de Celulose e Papel, MSc Thesis, UNESP, São Paulo, Brazil
Frihart CR (2015) Introduction to special issue: wood adhesives: past, present, and future. For Prod J 65(1–2):4–8
Holokiz H (1991) The effects of stock washing on the properties of hardboard. Appita v 25(3):194–199
Iwakiri S, Mendes L, Saldanha L, Santos J (2004) Utilizacao da madeira de eucalipto na producao de chapas de particulas orientadas – OSB. Cerne 10:46–52
Kohl D, Link P, Böhm S (2016) Wood as a technical material for structural vehicle components. Procedia CIRP 40:557–561
Krzysik AM, Muehl JH, Franca FS, Youngquist JA (2001) Medium Density Fiberboard Made from Eucalyptus Saligna. For Prod J 51:10
Lee SH, Lum WC, Petar A, Lubos K, Paridah MY (2022) Engineering wood products from Eucalyptus spp. Adv Mater Sci Eng 1:14.https://doi.org/10.1155/2022/8000780
Li J, Pang S (2006) Modelling of energy demand in an MDF plant. In: Proceedings of the CHEMECA: knowledge and innovation conference, Auckland, New Zealand, September 2006
Li M, Ren H (2022) Study on the interlaminar shear properties of hybrid cross-laminated timber (HCLT) prepared with larch, poplar and OSB. Ind Crops Prod 189:115756
Lowood J (1997) Oriented strand board and waferboard. In: Smulski S (ed) Engineered wood products: a guide for specifiers, designers, and users. PFS Research Foundation, Madison, Wise, pp 123–145
Magalhães R, Nogueira B, Costa S, Paiva N, Ferra JM, Magalhães FD, Martins J, Carvalho LH (2021) Effect of panel moisture content on internal bond strength and thickness swelling of medium density fiberboard. Polymers 13(1):114. https://doi.org/10.3390/polym13010114
Nishimura T (2015) Chipboard, oriented strand board (OSB) and structural composite lumber. In Wood composites. Woodhead Publishing 103–121
Pereira GF, Iwakiri S, Trianoski R, Rios PDA, Raia RZ (2021) Influence of thermal modification on the physical and mechanical properties of Eucalyptus badjensis mixed particleboard/OSB panels. Floresta 51(2):419–428
Pranda J (1995) Painéis de fibra de média densidade feitos de Pinus pinaster e Eucalipto globulus Área de composição química específica da madeira desfibrada. Drevarsky Vyskum 2:19–28
Ramli Sulong NH, Mustapa SAS, Abdul Rashid MK (2019) Application of expanded polystyrene (EPS) in buildings and constructions: a review. J Appl Polym Sci 136(20):47529
Rider TR, Glass S, McNaughton J (2011) Understanding green building materials. WW Norton & Company
Rosa TSD, Trianoski R, Iwakiri S, Bonduelle GM, Souza HPD (2017) Utilização de cinco espécies de Eucalyptus para a produção de painéis OSB. Floresta e Ambiente 24
Stark NM, Cai Z, Carll C (2010) Wood-based composite materials panel products, glued-laminated timber, structural composite lumber, and wood–nonwood composite materials. In: Wood handbook: wood as an engineering material, vol 1, pp 11–20
Sugahara E, Dias A, Arroyo F, Christoforo A, Michelle LC, Edson CB, Alfredo MPGD, Campos C (2022) Study of the influence of heat treatment on OSB panels produced with eucalyptus wood in different layer compositions. Forests 13:2083
Wilson JB (2008) Medium density fiberboard (MDF): a life-cycle inventory of manufacturing panels from resource through product. Final report to the Consortium for Research on Renewable Industrial Materials
Winandy JE, Kamke FA (2003) Fundamentals of composite processing. proceedings of a workshop (report no. FPL-GTR-149). U.S. Department of Agriculture Forest Products Laboratory, Madison, WI, USA
Wood Panel Industries federation, TRADA and National Panel Products Division (2014) Panel guide version 4, annex 2E—dry process fiberboards (MDF) (http://www.wpif.org.uk/uploads/PanelGuide/PanelGuide_2014_Annex2E.pdf)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Rosli, M.A.A. et al. (2024). An Overview of Medium-Density Fiberboard and Oriented Strand Board Made from Eucalyptus Wood. In: Lee, S.H., Lum, W.C., Antov, P., Krišťák, Ľ., Rahandi Lubis, M.A., Fatriasari, W. (eds) Eucalyptus. Springer, Singapore. https://doi.org/10.1007/978-981-99-7919-6_5
Download citation
DOI: https://doi.org/10.1007/978-981-99-7919-6_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-7918-9
Online ISBN: 978-981-99-7919-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)