Abstract
Based on the principle of thermoelectric effect, by detecting the thermoelectric potential at different temperatures at both ends of dry-type transformer windings combined with the difference of relative Seebeck coefficients between different metals, the inner winding material can be detected without destroying the whole insulation of epoxy resin of dry-type transformer, and the hidden danger of aluminum transformer pretending to be copper transformer can be found in time For transformers in operation, the same method can be used to detect and make targeted operation and maintenance strategies for aluminum transformers that have been found and have not experienced insulation deterioration for the time being, so as to effectively reduce the fault risk.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sun, D.H., Li, S.L.: Discussion on the characteristics of aluminum transformer and others. Transformer 52(1), 15–19 (2015). (in Chinese)
Identification method of transformer’ s product type: JB/T 3837—2010. China Standard Press, Beijing, China (2010). (in Chinese)
Du, L., Yu, X.X., Zhou, N.R., Wang, K., Tang, K.: Transformer winding material identification method based on thermoelectric effect. High Voltage Eng. 26(10), 2275–2280 (2011). (in Chinese)
Zhenyao, X., Qingguo, Y., Zhang, F.: Design and analysis of asymmetric rotor pole type Bearingless switched reluctance motor. China Electrotech. Soc. Trans. Electr. Mach. Syst. 6(1), 3–10 (2022)
Olivares, J.C., Leon, F.D.: Selection of copper against aluminium windings for distribution transformers. IET Electr. Power Appl. 4(6), 474–485 (2010)
Li, L.B., Sun, Y.F.: Metal material physical properties of the manual. Mechanical Industry Press, Beijing, China, pp. 173–175 (2011). (in Chinese)
Orr, W.W.: Aluminum and its future in power transformers. Electr. Eng. 78(7), 737 (1959)
Wu, Y.Z., Ma, Y.Q.: Study on performance calculation of copper-clad aluminum wire. Electric Mater. 3, 15–19 (2008). (in Chinese)
Zhang, Z., Liu, Y., Wang, J.: Optimal design of multi-channel water cooled radiator for motor controller of new energy vehicle. China Electrotech. Soc. Trans. Electr. Mach. Syst. 6(1), 87–94 (2022)
Xiang, Z., Weiling, P., Zhu, X., Quan, L.: Design and analysis of a v-shaped permanent magnet vernier motor for high torque density. China Electrotech. Soc. Trans. Electr. Mach. Syst. 6(1), 20–28 (2022)
Zhang, H., Wenfei, Y., Hua, W.: Design and key technology of oil-free centrifugal air compressor for hydrogen fuel cell. China Electrotech. Soc. Trans. Electr. Mach. Syst. 6(1), 11–19 (2022)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 Beijing Paike Culture Commu. Co., Ltd.
About this paper
Cite this paper
Wu, J., Chen, G., He, D., Li, S. (2023). Research and Application of Dry-Type Transformer Winding Material Detection Technology. In: Dong, X., Yang, Q., Ma, W. (eds) The proceedings of the 10th Frontier Academic Forum of Electrical Engineering (FAFEE2022). FAFEE 2022. Lecture Notes in Electrical Engineering, vol 1054. Springer, Singapore. https://doi.org/10.1007/978-981-99-3408-9_9
Download citation
DOI: https://doi.org/10.1007/978-981-99-3408-9_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-3407-2
Online ISBN: 978-981-99-3408-9
eBook Packages: EnergyEnergy (R0)