Abstract
Efficient structural maintenance is one of the crucial areas in structural engineering for the decades to come. While demolition and complete rebuilding is more and more avoided, retrofitting in case of structural deficiencies and/or change of use is constantly increasing. Traditionally, non-prestressed applied (and occasionally prestressed) composite or steel reinforcements are applied in case a structure requires an upgrade in order to meet criteria at both service load (and fire) and ultimate load state. This paper presents a powerful alternative to currently available technologies: iron-based shape memory alloys (Fe-SMA).
Shape memory alloys (SMAs) are able to regain their initial shape after having been deformed (prestraining). This recovery in strain can either occur immediately after unloading, or upon an activation at elevated temperatures. By prohibiting strain recovery, a tensile stress (recovery stress) develops in the alloy, which can be introduced as a compression (prestress) force to the parent structure via an end-anchorage. While Nickel-Titanium SMAs are well-established in other industries, iron-based SMA offers an economically more viable solution specifically for the construction industry. After early developments in Japan in the second half of the 20th century, a well-adapted alloy composition was patented by Empa about twenty years ago.
This paper presents early R&D activities at the level of material behavior towards first prototype developments for applications in structural engineering, specifically for the repair of existing constructions. It is shown how these first inventions paved the way for production at industrial scale of commercially available products. The manuscript discusses short- and long-term mechanical properties, advantages for on-site applications, structural behavior at service, fire, and ultimate load state, and how life expectancy of existing structures can be significantly enhanced by applying the said methods. Eventually, economic and ecological aspects of the presented retrofitting techniques are also discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Michels J, Shahverdi M, Czaderski C (2018) Flexural retrofitting of structural concrete with iron-based shape memory strips. Struct Concr 19(8):876–891
Czaderski C, Hahnebach B, Motavalli M (2006) RC beam with variable stiffness and strength. Constr Build Mater 20(9):824–833
Cladera A, Weber B, Leinenbach C, Czaderski C, Shahverdi M, Motavalli M (2014) Iron-based shape memory alloys for civil engineering structures: an overview. Constr. Build Mater 63
Dong UE, Klotz LC, Bergamini A, Czaderski C, Motavalli M (2009) A novel Fe-Mn-Si shape memory alloy with improved shape recovery properties by VC precipitation. Adv Eng Mater 11(1–2):40–44
Lee WJ, Weber B, Feltrin G, Czaderski C, Motavalli M, Leinenbach C (2013) Phase transformation behavior under uniaxial deformation of an Fe-Mn-Si-Cr-Ni-VC shape memory alloy. Mater Sci Eng A 581
Shahverdi M, Czaderski C, Motavalli M (2016) Iron-based shape memory alloys for prestressed near-surface-mounted strengthening of reinforced concrete beams. Constr Build Mater 112:28–38
Shahverdi M, Czaderski C, Annen P, Motavalli M (2016) Strengthening of RC beams by iron-based shape memory alloy bars embedded in a shotcrete layer. Eng Struct 117:263–273
Leinenbach C, Czaderski C, Michels J, Graf M, Kawalla R (2016) Development of rolling technology for an iron-based shape-memory-alloy. Mater Sci Forum 854:79–86
Shahverdi M, Michels J, Czaderski C, Motavalli M (2018) Iron-based shape memory alloy strips for strengthening RC members: material behavior and characterization. Constr Build Mater 173:586–599
Michels J, Shahverdi M, Czaderski C, El-Hacha R (2018) Mechanical performance of Fe-SMA ribbed bars for concrete prestressing. ACI Mater J 115(6):877–886
Schranz B (2017) Strengthening of reinforced concrete structures with iron-based shape memory alloy strips. Master thesis. University of Natural Resources and Life Sciences, Vienna
Schranz B, Czaderski C, Vogel T, Shahverdi M (2020) Bond behaviour of ribbed near-surface-mounted iron-based shape memory alloy bars with short bond lengths. Mater Des 191:108647121793
Schranz B, Czaderski C, Vogel T, Shahverdi M (2020) Bond investigations of prestressed, near-surface-mounted, ribbed memory-steel bars with full bond length. Mater Des 196:109145
Schranz B, Michels J, Shahverdi M, Czaderski C, Motavalli M, Vogel T (2021) Strengthening and prestressing of bridge decks with ribbed iron-based shape memory alloy bars. Eng Struct 241:112467
Fawaz G, Murcia-Delso J (2020) Bond behavior of iron-based shape memory alloy reinforcing bars embedded in concrete. Mater Struct 53(5):1–19
Strieder E, Aigner C, Petautschnig G, Horn S, Marcon M, Schwenn M, Bergmeister K (2019) Strengthening of reinforced concrete beams with externally mounted sequentially activated iron-based shape memory alloys. Materials 12(3):345
Montoya-Coronado LA, Ruiz-Pinilla JG, Ribas C, Cladera A (2019) Experimental study on shear strengthening of shear critical RC beams using iron-based shape memory alloy strips. Eng Struct 200:109680
Schranz B, Wagner PR, Czaderski C, Shahverdi M (2022) Fibre optic measurements and model uncertainty quantification for Fe-SMA strengthened concrete structures. Eng Struct 256:114005
Czaderski C, Shahverdi M, Michels J (2021) Iron-based shape memory alloys as shear reinforcement for bridge girders. Constr Build Mater 274:121793
Acknowledgements
The authors thank their employer refer AG for having the possibility to operate in an innovative working environment. A special debt of gratitude is owed to Empa, where the foundation of the memory-steel development was laid two decades ago. All other R&D partners all over the world are kindly acknowledged for their respective contribution to the improvement and study of iron-based shape memory alloys in structural engineering.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 Tongji University Press
About this paper
Cite this paper
Michels, J., Schranz, B. (2024). Iron-Based Shape Memory Alloys in Civil Engineering – from Early Developments to Market Implementation. In: Gu, XL., Motavalli, M., Ilki, A., Yu, QQ. (eds) Proceedings of the 6th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures. SMAR 2021. Lecture Notes in Civil Engineering, vol 259. Springer, Singapore. https://doi.org/10.1007/978-981-99-3362-4_3
Download citation
DOI: https://doi.org/10.1007/978-981-99-3362-4_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-3361-7
Online ISBN: 978-981-99-3362-4
eBook Packages: EngineeringEngineering (R0)