Skip to main content
SpringerLink
Log in

Investigation of the Effect of Electron-Beam Processing on the Surface of Samples Obtained by Additive Technologies from Cobalt-Chromium and Stainless Steel Powders

  • Conference paper
  • First Online:
Proceedings of the International Conference on Aerospace System Science and Engineering 2020 (ICASSE 2020)

Part of the book series: Lecture Notes in Electrical Engineering ((LNEE,volume 680))

Included in the following conference series:

  • 1188 Accesses

Abstract

Products made of cobalt-chromium and stainless steel made by additive manufacturing methods are widely used in many branches of modern industry (aviation, mechanical engineering, shipbuilding and instrumentation, energy, medicine, etc.). Surface treatment with high-current pulsed electron beams (HPEB) is a promising method for further expanding the scope of these alloys. The article presents studies of the structural and phase state of the surface layer of samples before and after treatment with high-current pulsed electron beams, as well as the results of roughness measurements before and after irradiation with high-current pulsed electron beams.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 229.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 299.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 299.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Shulov VA, Teryaev DA, Shirvanyants GG, Engelko VI, Gromov AN, Bytsenko OA (2015) Application of high-current pulsed electron beams for the restoration of properties of the blades of gas-turbine engines. Russian J Non-Ferrous Metals (56):333–338. https://doi.org/10.3103/S1067821215030190

  2. Pavlov YuS (2020) Russian electron beam technologies. Institution of physical chemistry and electrochemistry. https://old.phyche.ac.ru/wp-content/uploads/010.pdf, last accessed 10 Aug 2020

  3. Bytsenko OA, Filonova EV, Markov AB, Belova NA (2016) Influence of irradiation by high-temperature Nickel alloys with ion-plasma coatings of various compositions. Proc All-Russian Res Inst Aviat Mater 6(42):85–92. https://doi.org/10.18577/2307-6046-2016-0-6-10-10

    Article  Google Scholar 

  4. Shein E (2020) Modern materials for additive manufacturing. Additive technologies: present and future. In: Proceedings of the IV international conference, https://viam.ru/review/5942, last accessed 10 Aug 2020

  5. Starikov P, Ionov A, Seliverstov S, Borovik I, Matushkin A (2018) Mathematical modeling of heat transfer processes in a wall with a regular pseudo-pore structure. ICASSE 549:155–168. https://doi.org/10.1007/978-981-13-6061-9_10

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute №2 “Aviation Rocket Engines and Power Plants”, Moscow Aviation Institute, Volokolamsk highway.4, Moscow, 125993, Russia

    E. E. Dzhafarov, K. M. Erikov, O. A. Bytsenko & A. V. Ionov

  2. School of Aeronautics and Astronautics, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, China

    E. E. Dzhafarov & K. M. Erikov

Authors
  1. E. E. Dzhafarov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. K. M. Erikov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. O. A. Bytsenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. A. V. Ionov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. V. Ionov .

Editor information

Editors and Affiliations

  1. Shanghai Jiao Tong University, Shanghai, China

    Zhongliang Jing

  2. Shanghai Jiao Tong University, Shanghai, China

    Xingqun Zhan

Rights and permissions

Reprints and permissions

Copyright information

© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Dzhafarov, E.E., Erikov, K.M., Bytsenko, O.A., Ionov, A.V. (2021). Investigation of the Effect of Electron-Beam Processing on the Surface of Samples Obtained by Additive Technologies from Cobalt-Chromium and Stainless Steel Powders. In: Jing, Z., Zhan, X. (eds) Proceedings of the International Conference on Aerospace System Science and Engineering 2020. ICASSE 2020. Lecture Notes in Electrical Engineering, vol 680. Springer, Singapore. https://doi.org/10.1007/978-981-33-6060-0_7

Download citation

  • DOI: https://doi.org/10.1007/978-981-33-6060-0_7

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-33-6059-4

  • Online ISBN: 978-981-33-6060-0

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation