Abstract
Thermoelectric coolers (TECs) are solid state devices which consume electrical energy to transfer heat from its cold side to its hot side while maintaining the temperature difference across the two sides. They find extensive application in the field of thermal management and cooling of several electronic systems. One such system is that of optical or microwave detectors employed in spacecrafts and satellites. Such detectors operate intermittently and generate high power densities during their operation. TECs can be integrated into existing thermal control setup to ensure that the optimum operating temperature of detector is controlled so that the accuracy and efficacy of the system is maintained. However, integration of TEC into a given thermal control setup is a tedious task because the information regarding the properties of various materials and intricate geometry of the TEC are not available. The present study aims to develop a methodology to model the transient behavior of TEC without its internal geometry such that it can be readily integrated into the existing thermal control setup. The methodology consists of extracting the various parameters and thermal properties of TEC from its datasheet and modeling the TEC within the environment of a commercially available software. The model is validated against the transient experimental results under pulsed operation available in open literature.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gilmore DG (2002) Spacecraft thermal control handbook volume i: fundamental technologies. 2nd edn. American Institute of Aeronautics and Astronautics, Inc, Virginia
Zhu L, Tan H, Yu J (2013) Analysis on optimal heat exchanger size of thermoelectric cooler for electronic cooling applications. Energy Convers Manage 76:685–690
Zhang W, Shen L, Yang Y, Chen H (2015) Thermal management for a micro semiconductor lased based on thermoelectric cooling. Appl Therm Eng 90:664–673
Shen L, Chen H, Xiao F, Yang Y, Wang S (2014) The step change cooling performance of miniature thermoelectric module for pulse laser. Energy Convers Manage 80:39–45
Caroff T, Sarno C, Hodot R, Brignone M, Simon J (2015) New optimization strategy of thermoelectric coolers applied to automotive and avionic applications. Materials Today: Proc 2(2):751–760
Yin E, Li Q (2021) Device performance matching and optimization of photovoltaic-thermoelectric hybrid system. Energ Convers Manage 12
Lorenzi B, Mariani P, Reale A, Carlo A, Chen G, Narducci D (2021) Practical development of efficient thermoelectric-photovoltaic hybrid system based on wide-gap solar cells. Appl Energ 300
Mani PI (2016) Design, modelling and simulation of a thermoelectric cooling system, MSE thesis, Western Michigan University, USA
Chen M, Snyder G (2013) Analytical and numerical parameter extraction for compact modelling of thermoelectric coolers. Int J Heat Mass Transf 60:689–699
Cheng C, Huang S, Cheng T (2010) A three-dimensional theoretical model for predicting transient thermal behavior of thermoelectric coolers. Int J Heat Mass Transf 53(9):2001–2011
Cheng C, Huang S (2012) Development of a non-uniform current model for predicting transient thermal behavior of thermoelectric coolers. Appl Energy 100:326–335
Gao Y, Ling S, Dong X (2019) Numerical analysis for transient supercooling effect of pulse current shapes on a two-stage thermoelectric cooler. Appl Therm Eng 163:114416
Wang S, Liu H, Gao Y, Shen Y, Yang Y, Wang X, Lee D (2021) Transient supercooling performance of thermoelectric coolers with a continuous double current pulse. J Taiwan Inst Chem Eng 120:127–135
Ma M, Yu J (2016) Experimental study on transient cooling characteristics of a realistic thermoelectric module under a current pulse operation. Energ Convers Manage 126:210–216
Laird Thermal systems, TEC UT15-200-F2-4040-TA-W6 datasheet. https://www.lairdthermal.com/products/thermoelectric-cooler-modules/peltier-ultratec-series/UT15-200-F2-4040-TA-W6/pdf/. Last accessed 20 Oct 2021
Siemens NX (2013) NX thermal solver TMG reference manual, 9.0, 2013. Last accessed 22 Oct 2021
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Patel, A., Sisodia, S.S., Singh, V.K., Das, P., Bhavsar, R., Lakhera, V.J. (2023). Transient Thermal Modeling of Thermoelectric Coolers. In: Singh, V.K., Choubey, G., Suresh, S. (eds) Advances in Thermal Sciences. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-6470-1_20
Download citation
DOI: https://doi.org/10.1007/978-981-19-6470-1_20
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-6472-5
Online ISBN: 978-981-19-6470-1
eBook Packages: EngineeringEngineering (R0)