Abstract
Food waste nowadays has reached one-third of the entire food production. Considering this fact, if food waste was a country, its impact could have been third on global warming, after China and the USA. Several catalysts result in food waste, such as household-generated waste, overproduction, lack of facilities to store and preserve for a longer duration, lack of cold chain facilities, food processing industry and food trade losses, post-harvest losses due to mechanical infrastructure, and automation in handling and packaging. Waste minimization is a primary step for waste management in the food industries and has the potential to save millions of economic resources. Waste minimization practices such as increased machinery performance, the better quality of the fresh produce, reuse of trimmed products, specialized packaging for particular produce, appropriate product disposal, and well-analysed market demand could significantly reduce waste. Moreover, waste management includes several basic steps such as reducing waste, reusing the discarded resources while ensuring customer safety, recovery of the health-promoting bioactive and food additives from produced waste, and desirable measures for disposal of the waste to minimize waste any hazards towards life and the environment. Hence, the primary implementation of waste minimization and management operations could reduce waste production in food industries and protect the resources from unwanted disposal and economic loss. Additionally, it will also protect the environment and life on our planet.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ahmad T et al (2019) Treatment and utilization of dairy industrial waste: a review. Trends Food Sci Technol 88:361–372. https://doi.org/10.1016/j.tifs.2019.04.003
Allison BJ, Simmons CW (2017) Valorization of tomato pomace by sequential lycopene extraction and anaerobic digestion. Biomass Bioenergy 105:331–341. https://doi.org/10.1016/j.biombioe.2017.07.019
Arvanitoyannis IS, Kassaveti A (2008) Fish industry waste: treatments, environmental impacts, current and potential uses. Int J Food Sci Technol 43(4):726–745. https://doi.org/10.1111/j.1365-2621.2006.01513.x
Azmir J et al (2013) Techniques for extraction of bioactive compounds from plant materials: a review. J Food Eng 117(4):426–436. https://doi.org/10.1016/j.jfoodeng.2013.01.014
Baiano A (2014) Recovery of biomolecules from food wastes—a review. Molecules 19(9):14821–14842. https://doi.org/10.3390/molecules190914821
Baldwin CJ (2014) The 10 principles of food industry sustainability. Wiley, pp 1–207. https://doi.org/10.1002/9781118447697
Belc N et al (2019) Cereal supply chain waste in the context of circular economy. E3S Web Conf 112. https://doi.org/10.1051/e3sconf/201911203031
Bernstad Saraiva Schott A, Andersson T (2015) Food waste minimization from a life-cycle perspective. J Environ Manag 147:219–226. https://doi.org/10.1016/j.jenvman.2014.07.048
Blakeney M (2019) Food loss and food waste: causes and solutions. https://doi.org/10.4337/9781788975391
Buckholtz B, Ragai I, Wang L (2015) Cloud manufacturing: current trends and future implementations. J Manuf Sci E T ASME 137(4):1–9. https://doi.org/10.1115/1.4030009
Canali M et al (2014) Drivers of current food waste generation, threats of future increase and opportunities for reduction. https://www.eu-fusions.org/index.php/publications/265-establishing-a-common-framework-for-food-waste-definition-and-identifying-its-drivers
Chen S (2009) Food engineering—food waste. Encyclopedia of life support systems (EOLSS), vol IV, pp 148–155
Choi C, Kim C, Kim C (2019) Towards sustainable environmental policy and management in the fourth industrial revolution: evidence from big data analytics. J Asian Finance Econ Bus 6(3):185–192. https://doi.org/10.13106/jafeb.2019.vol6.no3.185
De Mauro A, Greco M, Grimaldi M (2016) A formal definition of big data based on its essential features. Libr Rev 65(3):122–135. https://doi.org/10.1108/LR-06-2015-0061
Dhana Shree K, Janani B, Reenadevi R, Rajesh R (2019) Garbage monitoring system using smart bins. Int J Sci Technol Res 8:1921–1925
Digiesi S, Facchini F, Mossa G, Mummolo G, Verriello R (2015) A cyber - based DSS for a low carbon integrated waste management system in a smart city. IFAC-PapersOnLine 48:2356–2361
Fan B, Guo L, Li N, Chen J, Lin H, Zhang X, Shen M, Rao Y, Wang C, Ma L (2014) Earlier vegetation green-up has reduced spring dust storms. GSCE Faculty Publications. Paper 5
FAO (2020) Food security and nutrition in the world. IEEE J Sel Top Appl Earth Obs Remote Sens
February A et al (2012) Principles of municipal solid, pp 5–31
Fisher WE et al (1998) The age of analytics: competing in a data-driven world. Int J Pancreatol 24(3):169–180
Fisher O et al (2018) Cloud manufacturing as a sustainable process manufacturing route. J Manuf Syst 47:53–68. https://doi.org/10.1016/j.jmsy.2018.03.005
Food and Agriculture Organization of the United Nations (FAO) (2015) Food wastage footprint & climate change, vol 1, pp 1–4. http://www.fao.org/3/a-bb144e.pdf
Gao RX et al (2020) Big data analytics for smart factories of the future. CIRP Ann 69(2):668–692. https://doi.org/10.1016/j.cirp.2020.05.002
Garcia-Garcia G, Stone J, Rahimifard S (2019) Opportunities for waste valorisation in the food industry—a case study with four UK food manufacturers. J Clean Prod 211:1339–1356. https://doi.org/10.1016/j.jclepro.2018.11.269
Giret A, Trentesaux D, Prabhu V (2015) Sustainability in manufacturing operations scheduling: a state of the art review. J Manuf Syst:126–140. https://doi.org/10.1016/j.jmsy.2015.08.002
Girotto F, Alibardi L, Cossu R (2015) Food waste generation and industrial uses: a review. Waste Manag 45:32–41. https://doi.org/10.1016/j.wasman.2015.06.008
Guo L (2016) A system design method for cloud manufacturing application system. Int J Adv Manuf Technol 84(1–4):275–289. https://doi.org/10.1007/s00170-015-8092-0
Hang YD (2004) Management and utilization of food processing wastes. J Food Sci 69(3):104–107. https://doi.org/10.1111/j.1365-2621.2004.tb13341.x
Henningsson S et al (2004) The value of resource efficiency in the food industry: a waste minimisation project in East Anglia, UK. J Clean Prod 12(5):505–512. https://doi.org/10.1016/S0959-6526(03)00104-5
Huang SH et al (2013) Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Technol 67(5–8):1191–1203. https://doi.org/10.1007/s00170-012-4558-5
Hyun Park S et al (2017) Building a new culture for quality management in the era of the Fourth Industrial Revolution. Total Qual Manag Bus Excell 28(9–10):934–945. https://doi.org/10.1080/14783363.2017.1310703
Idwan S, Mahmood I, Zubairi JA, Matar I (2020) Optimal management of solid waste in smart cities using internet of things. Wirel Pers Commun 110:485–501
Jagtap S, Rahimifard S (2019) The digitisation of food manufacturing to reduce waste—case study of a ready meal factory. Waste Manag 87:387–397. https://doi.org/10.1016/j.wasman.2019.02.017
Jain S et al (2018) Global food waste management: full report an implementation guide for cities. World Biogas Association, pp 1–145. http://www.waste.ccacoalition.org/document/white-paper-waste-and-climate-change-iswa-key-
Jaishankar M et al (2014) Toxicity, mechanism and health effects of some heavy metals. Interdiscip Toxicol 7(2):60–72. https://doi.org/10.2478/intox-2014-0009
Jonkeren O, Francke J, Visser J (2019) A shift-share based tool for assessing the contribution of a modal shift to the decarbonisation of inland freight transport. Eur Transp Res Rev 11(1). https://doi.org/10.1186/s12544-019-0344-x
Jülicher S (2019) Recommendations for action in food waste prevention, pp 1–22
Kakkavas G et al (2020) A review of advanced algebraic approaches enabling network tomography for future network infrastructures. Future Internet 12(2):1–27. https://doi.org/10.3390/fi12020020
Kang KD, Kang H, Ilankoon IMSK, Chong CY (2020) Electronic waste collection systems using Internet of Things (IoT): household electronic waste management in Malaysia. J Clean Prod 252
Kozjek D et al (2017) A data-driven holistic approach to fault prognostics in a cyclic manufacturing process. Procedia CIRP 63:664–669. https://doi.org/10.1016/j.procir.2017.03.109
Kozina A, Radica G, Nižetić S (2020) Analysis of methods towards reduction of harmful pollutants from diesel engines. J Clean Prod 262
Kumar K et al (2017) Food waste: a potential bioresource for extraction of nutraceuticals and bioactive compounds. Bioresour Bioprocess 4(1). https://doi.org/10.1186/s40643-017-0148-6
Kurada S, Bradley C (1997) A review of machine vision sensors for tool condition monitoring. Comput Ind 34(1):55–72. https://doi.org/10.1016/s0166-3615(96)00075-9
Kwan TH et al (2018) Valorisation of food and beverage waste via saccharification for sugars recovery. Bioresour Technol 255:67–75. https://doi.org/10.1016/j.biortech.2018.01.077
Lau T, Harbourne N, Oruña-Concha MJ (2019) Valorisation of sweet corn (Zea mays) cob by extraction of valuable compounds. Int J Food Sci Technol 54(4):1240–1246. https://doi.org/10.1111/ijfs.14092
Li Y et al (2020) Design of and research on industrial measuring devices based on internet of things technology. Ad Hoc Netw. https://doi.org/10.1016/j.adhoc.2020.102072
Liegeard J, Manning L (2020) Use of intelligent applications to reduce household food waste. Crit Rev Food Sci Nutr 60(6):1048–1061. https://doi.org/10.1080/10408398.2018.1556580
Loius Columbus (2018). https://www.forbes.com/sites/louiscolumbus/2017/12/10/2017-roundup-of-internet-of-things-forecasts/?sh=64409fbe1480. Accessed 5 April 2022
Malamis D et al (2015) Compositional analysis of biowaste from study sites in Greek municipalities. Waste Biomass Valori 6(5):637–646. https://doi.org/10.1007/s12649-015-9406-z
Mannan MS et al (2016) The evolution of process safety: current status and future direction. Annu Rev Chem Biomol Eng 7:135–162. https://doi.org/10.1146/annurev-chembioeng-080615-033640
Moghaddam M, Silva JR, Nof SY (2015) Manufacturing-as-a-service—from e-work and service-oriented architecture to the cloud manufacturing paradigm. IFAC-PapersOnLine 28(3):828–833. https://doi.org/10.1016/j.ifacol.2015.06.186
Morikawa CK, Saigusa M (2011) Recycling coffee grounds and tea leaf wastes to improve the yield and mineral content of grains of paddy rice. J Sci Food Agric 91(11):2108–2111. https://doi.org/10.1002/jsfa.4444
Nagarajan HPN, Raman AS, Haapala KR (2018) A sustainability assessment framework for dynamic cloud-based distributed manufacturing. Procedia CIRP 69(May):136–141. https://doi.org/10.1016/j.procir.2017.11.120
Nižetić S et al (2019) Smart technologies for promotion of energy efficiency, utilization of sustainable resources and waste management. J Clean Prod 231:565–591. https://doi.org/10.1016/j.jclepro.2019.04.397
Nižetić S et al (2020) Internet of things (IoT): opportunities, issues and challenges towards a smart and sustainable future. J Clean Prod 274. https://doi.org/10.1016/j.jclepro.2020.122877
Oirere SB et al (2004) Assessment of waste management structures for tea factories in Kenya: a case study of Nyansiongo Tea Factory, pp 727–737
Ojha T, Misra S, Raghuwanshi NS (2015) Wireless sensor networks for agriculture: the state-of-the-art in practice and future challenges. In: Computers and electronics in agriculture, pp 66–84. https://doi.org/10.1016/j.compag.2015.08.011
Otles S et al (2015) Food waste management, valorization, and sustainability in the food industry. In: Food waste recovery: processing technologies and industrial techniques. Elsevier Inc. https://doi.org/10.1016/B978-0-12-800351-0.00001-8
Pap N, Myllykoski L (2014) Waste minimization and utilization in the food industry: valorization of food industry wastes and byproducts. In: Introduction to advanced food process engineering. https://doi.org/10.1201/b16696-23
Parfitt J, Barthel M, MacNaughton S (2010) Food waste within food supply chains: quantification and potential for change to 2050. Philos Trans R Soc B Biol Sci 365(1554):3065–3081. https://doi.org/10.1098/rstb.2010.0126
Perez EE, Carelli AA, Crapiste GH (2011) Temperature-dependent diffusion coefficient of oil from different sunflower seeds during extraction with hexane. J Food Eng 105(1):180–185. https://doi.org/10.1016/j.jfoodeng.2011.02.025
Pinotti L et al (2020) Reduce, reuse, recycle for food waste: a second life for fresh-cut leafy salad crops in animal diets. Animals 10(6):1–14. https://doi.org/10.3390/ani10061082
Principato L et al (2019) Adopting the circular economy approach on food loss and waste: the case of Italian pasta production’. Resour Conserv Recycl 144:82–89. https://doi.org/10.1016/j.resconrec.2019.01.025
Quirós-Sauceda AE et al (2014) Edible coatings as encapsulating matrices for bioactive compounds: a review. J Food Sci Technol 51(9):1674–1685. https://doi.org/10.1007/s13197-013-1246-x
Rauch E et al (2015) Sustainability in manufacturing through distributed manufacturing systems (DMS). Procedia CIRP 29:544–549. https://doi.org/10.1016/j.procir.2015.01.069
Ren L et al (2015) Cloud manufacturing: from concept to practice. Enterp Inf Syst 9(2):186–209. https://doi.org/10.1080/17517575.2013.839055
Ren L, Zhang L, Wang L, Tao F, Chai X (2017) Cloud manufacturing: key characteristics and applications. Int J Comput Integr Manuf 30:501–515
Rezaei M, Liu B (2017) Food loss and waste in the food supply chain. Int Nutr Dried Fruit Council 39(7):1–2. http://theplate.nationalgeographic.com/2016/01/22/kenyan-farmers%2D%2Dght-food-loss-by-drying-selling-mangoes/
Rudolph Raj J, Seetharaman A (2013) Role of waste and performance management in the construction industry. J Environ Sci Technol:119–129. https://doi.org/10.3923/jest.2013.119.129
Sadiku MNO, Musa SM, Ashaolu TJ (2019) Food industry: an introduction. Int J Trend Sci Res Dev 3(4):128–130. https://doi.org/10.31142/ijtsrd23638
Sahakian M et al (2020) Apprehending food waste in Asia: policies, practices and promising trends. In: Routledge handbook of food waste, pp 187–206
Saki M, Abolhasan M, Lipman J (2020) A novel approach for big data classification and transportation in rail networks. IEEE Trans Intell Transp Syst 21(3):1239–1249. https://doi.org/10.1109/TITS.2019.2905611
Schiefer G (2004) New technologies and their impact on the agri-food sector: an economists view. Comput Electron Agric 43(2):163–172. https://doi.org/10.1016/j.compag.2003.12.002
Sen ATS (2012) Food canning waste in industrial processes. Malaysian Food Canners’ Association. https://doi.org/10.13140/RG.2.1.2769.4487
Shen X, Fantacci R, Chen S (2020) Internet of vehicles. Proc IEEE 108:242–245
Short SW, Bocken NMP, Barlow CY, Chertow MR (2014) From refining sugar to growing tomatoes: industrial ecology and business model evolution. J Ind Ecol 18:603–618
Singh A et al (2015) Cloud computing technology: reducing carbon footprint in beef supply chain. Int J Prod Econ 164:462–471. https://doi.org/10.1016/j.ijpe.2014.09.019
Sowbhagya HB (2019) Value-added processing of by-products from spice industry. Food Qual Saf 3(2):73–80. https://doi.org/10.1093/fqsafe/fyy029
Strotmann C et al (2017) A participatory approach to minimizing food waste in the food industry—a manual for managers. Sustainability (Switzerland). https://doi.org/10.3390/su9010066
Torres-León C et al (2018) Food waste and byproducts: an opportunity to minimize malnutrition and hunger in developing countries. Front Sustain Food Syst 2:1–17. https://doi.org/10.3389/fsufs.2018.00052
USEPA (2013) Aquatic life ambient water quality criteria for ammonia—freshwater 2013. United States Environ Protect Agency 13:1–255
Villarejo R et al (2014) Bottom to top approach for railway KPI generation. In: Proceedings of maintenance performance measurement and management (MPMM) conference 2014, pp 171–177. https://doi.org/10.14195/978-972-8954-42-0_25
Voca N, Ribic B (2020) Biofuel production and utilization through smart and sustainable biowaste management. J Clean Prod 259
Wang R, Zhou X, Chen Z (2008) High pressure inactivation of lipoxygenase in soy milk and crude soybean extract. Food Chem 106(2):603–611. https://doi.org/10.1016/j.foodchem.2007.06.056
Waste T, Processing T (2020) Environmental pollution by tea Processing. J Res Technol Eng 1(4):95–104
WRAP (2011) Reducing household bakery waste. Final report, pp 1–151. https://www.wrap.org.uk/sites/files/wrap/Research%20Bakery%20Report%20final.pdf
WRAP (2013) Household food and drink waste in the UK: executive summary. Wrap. p 95. http://www.wrap.org.uk/content/household-food-and-drink-waste-uk-2009
WRAP and IGD (2020) The food waste reduction roadmap—progress report 2020. https://wrap.org.uk/sites/files/wrap/Food-Waste-Reduction-Roadmap-Progress-Report-2020_0.pdf
Wu D et al (2013) Enhancing the product realization process with cloud-based design and manufacturing systems. J Comput Inf Sci Eng 13(4). https://doi.org/10.1115/1.4025257
Xin Y, Tao F (2020) Developing climate-smart agricultural systems in the North China Plain. Agric Ecosyst Environ. https://doi.org/10.1016/j.agee.2019.106791
Xu X (2012) From cloud computing to cloud manufacturing. Robot Comput Integr Manuf 28(1):75–86. https://doi.org/10.1016/j.rcim.2011.07.002
Yang C et al (2016) A hybrid framework for integrating multiple manufacturing clouds. Int J Adv Manuf Technol 86(1–4):895–911. https://doi.org/10.1007/s00170-015-8177-9
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive licence to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Kumar, R., Sharma, V., Oruna-Concha, M.J. (2022). Waste Minimization and Management in Food Industry. In: Sehgal, S., Singh, B., Sharma, V. (eds) Smart and Sustainable Food Technologies. Springer, Singapore. https://doi.org/10.1007/978-981-19-1746-2_11
Download citation
DOI: https://doi.org/10.1007/978-981-19-1746-2_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-1745-5
Online ISBN: 978-981-19-1746-2
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)