Abstract
Additive manufacturing (AM) is a tool that has revolutionized the way products are manufactured and assembled. As 3D printing is a rapid prototyping process hence owing to its continuous usage of filament, sustainability has become an important issue to be discussed. After 3D printing of parts it is realized that a lot of material is finally ended up in the garbage. This paper acquaints with the feasibility of recyclable 3D printed filament to create a sustainable technology for 3D printing and the environmental implications of non-biodegradable waste and also highlights its responsible management for sustainable ecological protection with reference to the legal provisions. In the constitution of India, under the directive principle of state policy (Part IV) it clearly states that it is the duty of every citizen “to protect and improve the natural environment including forests, lakes, rivers and wildlife”. In the case of Dr. B. L. Wadehra versus Union of India it was held that to live in a clean city is a statutory right of every citizen. Hence converting 3D printed wastes and 3D parts at the end of their life into reusable material is the key factor.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kohtala C (2015) Addressing sustainability in research on distributed production: an integrated literature review. J Clean Prod 106:654–668
Karen L (2016) New filament aims to bring sustainability to 3D printing. Plastics Today
Daniel C, Sargeant M, Somers K (2016) 3-D printing takes shape. McKinsey & Company
Hopewell J, Drovak R, Kosior E (2009) Plastics recycling: challenges and opportunities. Philos Trans R Soc B 364(1526):2115–2126
Calignano F, Manfredi D, Ambrosio EP, Biamino S, Lombardi M, Atzeni E, Salmi A, Minetola P, Iuliano L, Fino P (2017) Overview on additive manufacturing technologies. Proc IEEE 105(4):593–612
ISO/ASTM Standard, 52900 (2015) Additive manufacturing, General principles: Terminology
Drizo A, Pegna J (2006) Environmental impacts of rapid prototyping: an overview of research to date. Rapid Prototyp J 12(2):64–71
Herrmann C, Bergmann L, Thiede S (2009) Methodology for the design of sustainable production systems. Int J Sustain Manuf 1(4):376–395
“European Union action on circular economy” European Commission (2017)
Lepowsky E, Tasoglu S (2018) Emerging anti-fouling methods “towards reusability of 3D- printed devices for biomedical applications. Micromachines
Jasveer S, Jianbin X (2018) Comparison of different types of 3D printing technologies. Int J Sci Res Publi 8(4)
Wohlers Talk (2016) “Popularity of FDM” 3D printing ,additive manufacturing, future—Terry Wohler
McAlister C, Wood J (2014) The potential of 3D printing to reduce the environmental impacts of Production. Sustainable production design & supply chain initiatives, Eceee Ind. Summer Study Proc
Gebler M, Schoot Uiterkamp AJM, Visser C (2014) A global sustainability perspective on 3D printing technologies. Energy Policy 74:158–167
Lehrer J, Scanlon M (2017) The development of a sustainable technology for 3D printing using recycled materials, Fall 2017 Mid-Atlantic ASEE Conference
Li T, Aspler J, Kingsland A, Cormier LM, Zou X (2016) 3d printing–a review of technologies, markets, and opportunities for the forest industry. J Sci Technol For Prod Process 5(2):30
Duigou AL, Castro M, Bevanc R, Martin N (2016) 3D printing of wood fibre biocomposites: from mechanical to actuation functionality. Mater Des 96:106–114
Cantrell J, Rohde S, Damiani D, Gurnani R, DiSandro L, Anton J, Young A, Jerez A, Steinbach D, Kroese C, Ifju P (2016) Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts. Adv Opt Methods Exp Mech 3:89–105
Letcher T (2014) Material property testing of 3D printed Specimen in PLA on an Entry level 3D printer. In: Proceedings of the ASME 2014 international mechanical engineering congress & exposition
Cruz F, Lanza S, Boudaoud H, Hoppe S, Camargo M (2015) Polymer recycling and additive manufacturing in an open source context: optimization of processes and methods. In: Annual international solid freeform fabrication symposium-an additive manufacturing conference. Austin, Texas (USA), pp 10–12
Kuo CC, Liu LC, Teng WF, Chang HY, Chien FM, Liao SJ, Kuo WF, Chen CM (2016) Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications. Compos B 86:36–39
Zhang D, Chi B, Li B, Gao Z, Du Y, Guo J, Wei J (2016) Fabrication of highly conductive graphene flexible circuits by 3D printing. Synth Met 217:79–86
Hamod H (2014) Suitability of recycled HDPE for 3D printing filament” B.Sc Thesis. Arcada University of Applied Science, Helsinki
Markstedt K, Sundberg J, Gatenholm P (2014) 3D bioprinting of cellulose structures from an ionic liquid. 3D Print Addit Manuf 1(3):115–121
Shastri C Solid waste management–an Indian legal profile
Ray M, Rahman M (2016) An overview of legal framework for waste management system in india with special allusion to SWM rules. Int J Interdiscip Multidiscip Stud 4(1):13–19
Bharadwaj A, Yadav D, Varshney S (2015) Non-biodegradable waste–its impact & safe disposal. Int J Adv Technol Eng Sci 3
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Patpatiya, P., Arora, N. (2022). Assessing the Reusability of 3D Printer Filaments with Reference to Legal Aspects of Sustainability. In: Gupta, A.R., Roy, N.K., Parida, S.K. (eds) Power Electronics and High Voltage in Smart Grid. Lecture Notes in Electrical Engineering, vol 817. Springer, Singapore. https://doi.org/10.1007/978-981-16-7393-1_11
Download citation
DOI: https://doi.org/10.1007/978-981-16-7393-1_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-7392-4
Online ISBN: 978-981-16-7393-1
eBook Packages: EnergyEnergy (R0)