Abstract
The demand for vibrational energy harvesting systems has increased over the past decade. The motivation for the researchers in this area is to decrease the requirement of the external power sources and reduce the maintenance cost. In the present analysis, the energy harvesting capability of a tapered laminated composite beam integrated with piezoelectric stacks is studied with respect to geometry and material properties. The substrate material is made up of laminated carbon fiber-reinforced epoxy composite with different fiber orientations, and piezoelectric patches are attached on top and bottom surfaces. In order to solve the dynamic analysis, three-dimensional finite element analysis is carried out. Here, the piezoelectric layers are modeled using PZT-5H material type. Initially, the model is validated with the available literature results and is found to be in good agreement. Furthermore, the laminated composite beam is base excited at the resonant frequency and the effect of different geometrical parameters, material parameters, and stacking sequences of the lamina on the voltage and power output is studied. Both series and parallel configurations are accounted in the present analysis.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sodano HA, Park G, Inman DJ (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain 40:49–58. https://doi.org/10.1111/j.1475-1305.2004.00120.x
Roundy S (2005) On the effectiveness of vibration-based energy harvesting. J Intell Mater Syst Struct 16:809–823. https://doi.org/10.1177/1045389X05054042
Roundy S, Leland ES, Baker J, Carleton E, Reilly E, Lai E, Otis B, Rabaey JM, Wright PK, Sundararajan V (2005) Improving power output for vibration-based energy scavengers. IEEE Pervasive Comput 4:28–36. https://doi.org/10.1109/MPRV.2005.14
Shu YC, Lien IC (2006) Analysis of power output for piezoelectric energy harvesting systems. Smart Mater Struct 15:1499–1512. https://doi.org/10.1088/0964-1726/15/6/001
Guan MJ, Liao WH (2007) On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Mater Struct 16:498–505. https://doi.org/10.1088/0964-1726/16/2/031
Erturk A, Renno JM, Inman DJ (2008) Piezoelectric energy harvesting from an L-shaped beam-mass structure. Act Passiv Smart Struct Integr Syst 6928:69280I. https://doi.org/10.1117/12.776211
Erturk A, Inman DJ (2008) Issues in mathematical modeling of piezoelectric energy harvesters. Smart Mater Struct 17. https://doi.org/10.1088/0964-1726/17/6/065016
Erturk A, Inman DJ (2009) An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater Struct 18. https://doi.org/10.1088/0964-1726/18/2/025009
Zhang L, Williams KA, Xie Z (2013) Evaluation of analytical and finite element modeling on coupled field dynamics of piezoelectric cantilever bimorph harvester. Appl Mech Mater 284–287:1846–1850. https://doi.org/10.4028/www.scientific.net/AMM.284-287.1846
Zhang L, Williams KA, Xie Z (2013) Development and validation of an enhanced coupled-field model for PZT cantilever bimorph energy harvester. Math Probl Eng. https://doi.org/10.1155/2013/980161
Elvin N, Erturk A (2013) Advances in energy harvesting methods. Adv Energy Harvest Methods 9781461457:1–455. https://doi.org/10.1007/978-1-4614-5705-3
Leadenham S, Erturk A (2014) Unified nonlinear electroelastic dynamics of a bimorph piezoelectric cantilever for energy harvesting, sensing, and actuation. Nonlinear Dyn 79:1727–1743. https://doi.org/10.1007/s11071-014-1770-x
Rosa M, De Marqui Junior C (2014) Modeling and analysis of a piezoelectric energy harvester with varying cross-sectional area. Shock Vib. https://doi.org/10.1155/2014/930503
Syta A, Bowen CR, Kim HA, Rysak A, Litak G (2015) Experimental analysis of the dynamical response of energy harvesting devices based on bistable laminated plates. Meccanica 50:1961–1970. https://doi.org/10.1007/s11012-015-0140-1
Amini Y, Emdad H, Farid M (2015) Finite element modeling of functionally graded piezoelectric harvesters. Compos Struct 129:165–176. https://doi.org/10.1016/j.compstruct.2015.04.011
Tan T, Yan Z, Hajj M (2016) Electromechanical decoupled model for cantilever-beam piezoelectric energy harvesters. Appl Phys Lett 109. https://doi.org/10.1063/1.4962533
Kim HS, Kim JH, Kim J (2011) A review of piezoelectric energy harvesting based on vibration. Int J Precis Eng Manuf 12:1129–1141. https://doi.org/10.1007/s12541-011-0151-3
Kumar S, Srivastava R, Srivastava RK (2016) Design and analysis of smart piezo cantilever beam for energy harvesting. Ferroelectrics 505:159–183. https://doi.org/10.1080/00150193.2016.1255848
Wang B, Luo X, Liu Y, Yang Z (2020) Thickness-variable composite beams for vibration energy harvesting. Compos Struct 244. https://doi.org/10.1016/j.compstruct.2020.112232
Paknejad A, Rahimi G, Farrokhabadi A, Khatibi MM (2016) Analytical solution of piezoelectric energy harvester patch for various thin multilayer composite beams. Compos Struct 154:694–706. https://doi.org/10.1016/j.compstruct.2016.06.074
Jha BK, Ray MC (2019) Benchmark analysis of piezoelectric bimorph energy harvesters composed of laminated composite beam substrates. Int J Mech Mater Des 15:739–755. https://doi.org/10.1007/s10999-018-9434-5
Paquin S, St-Amant Y (2010) Improving the performance of a piezoelectric energy harvester using a variable thickness beam. Smart Mater Struct 19. https://doi.org/10.1088/0964-1726/19/10/105020
Jin L, Gao S, Zhang X, Wu Q (2020) Output of MEMS piezoelectric energy harvester of double-clamped beams with different width shapes. Materials (Basel) 13. https://doi.org/10.3390/ma13102330
Hajheidari P, Stiharu I, Bhat R (2020) Performance enhancement of cantilever piezoelectric energy harvesters by sizing analysis. Int J Smart Nano Mater 11:93–116. https://doi.org/10.1080/19475411.2020.1751743
Yang Z, Zhou S, Zu J, Inman D (2018) High-performance piezoelectric energy harvesters and their applications. Joule 2:642–697. https://doi.org/10.1016/j.joule.2018.03.011
Jones RM (1998) Mechanics of composite materials. CRC Press
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Panda, S.K., Srinivas, J. (2022). Parametric Analysis of Tapered Laminated Composite Beam in Piezoelectric Vibration Energy Harvesting. In: Maity, D., et al. Recent Advances in Computational and Experimental Mechanics, Vol—I. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-6738-1_52
Download citation
DOI: https://doi.org/10.1007/978-981-16-6738-1_52
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-6737-4
Online ISBN: 978-981-16-6738-1
eBook Packages: EngineeringEngineering (R0)