Skip to main content
SpringerLink
Log in

The Fretting Characteristics of the Annular Flat Contact Interface in Heavy-Duty Gas Turbine

  • Conference paper
  • First Online:
Advances in Applied Nonlinear Dynamics, Vibration and Control -2021 (ICANDVC 2021)

Part of the book series: Lecture Notes in Electrical Engineering ((LNEE,volume 799))

  • 3129 Accesses

Abstract

Aimed at the typical annular flat connection structure in the heavy-duty gas turbine, based on the Archard wear theory and finite element method, the influences of tie rod parameters and material properties on the fretting damage characteristics of the annular flat contact interface are studied. The results show that the preload mistuning of tie rod will result in the uneven distribution of fretting characteristics in the circumferential direction. With the tie rod approaches to the annular flat, the relative slip distance and shear stress decrease, while the contact pressure increases at the inner side of annular flat and decreases at the outer side of the annular flat. The material properties have little effect on contact pressure. When friction coefficient, elastic modulus and Poisson’s ratio of annular flat increase, the shear stress, slip distance and wear depth decrease. The researches can provide a reference for the mechanism design and engineering application of the annular flat connection structure.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 259.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 329.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Free shipping worldwide - see info
Hardcover Book
USD 329.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Xia K, Sun Y, Zhuo M (2018) Torsional behavior of annular flat contact shaft segment attached with torsion pins. J Xi’an Jiaotong Univ 52(9):82–88

    Google Scholar 

  2. Lee BW, Suh J, Lee H et al (2011) Investigations on fretting fatigue in aircraft engine compressor blade. Eng Fail Anal 18(7):1900–1908

    Article  Google Scholar 

  3. Hintikka J, Lehtovaara A (2015) Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribol Int 92:191–202

    Article  Google Scholar 

  4. Zhang P, Liu XJ, Lu WL (2018) Fretting wear behavior of CuNiAl against 42CrMo4 under different lubrication conditions. Tribol Int 117:59–67

    Article  Google Scholar 

  5. Leonard BD, Patil P, Slack TS et al (2011) Fretting wear modeling of coated and uncoated surfaces using the combined finite-discrete element method. J Tribol 133(2):021601–021613

    Article  Google Scholar 

  6. Yue TY, Wahab MA (2017) Finite element analysis of fretting wear under variable coefficient of friction and different contact regimes. Tribol Int 107:274–282

    Article  Google Scholar 

  7. Mccoll IR, Ding J, Leen SB (2004) Finite element simulation and experimental validation of fretting wear. Wear 256(11):1114–1127

    Article  Google Scholar 

  8. Gong Y, Lu L, Zeng D (2017) Simulation research on the fretting wear of press-fitted hollow axle. J Mech Eng 53(6):123–130

    Google Scholar 

  9. Lin G, Yang D (2007) Modern gas Turbine for high power generation. China Machine Press, Beijing, China

    Google Scholar 

  10. Zhu M, Zhang S, Ding X (2020) Effects of pre-tightening detuning on the natural frequency of distributed tie-rod rotor. Mach Tool Hydraulics 48(13):17–21

    Google Scholar 

  11. Yuan S, Zhang Y, Zhang X, Zhu Y (2013) Analysis of bolt preload mistuned model and its impact on stress distribution of curvic couplings. J Harbin Inst Technol 45(05):64–69

    Google Scholar 

  12. Zhang Y, Wang A, Yonglei S, Zeng H (2014) Effect of preload mistuning on dynamic characteristic and structural strength of combined rotors. Chin J Eng Des 21(06):534–539

    Google Scholar 

  13. Archard JF (1974) Surface topography and tribology. Tribology 7(5):213–220

    Article  Google Scholar 

  14. Madge JJ, Leen SB, Mccoll IR et al (2007) Contact-evolution based prediction of fretting fatigue life: effect of slip amplitude. Wear 262(9):1159–1170

    Article  Google Scholar 

  15. Mukras S, Kim NH, Sawyer WG et al (2009) Numerical integration schemes and parallel computation for wear prediction using finite element method. Wear 266(7–8):822–831

    Article  Google Scholar 

  16. Madge J, Leen SB, Shipway PH (2008) A combined wear and crack nucleation-propagation methodology for fretting fatigue prediction. Int J Fatigue 30(9):1509–1528

    Article  Google Scholar 

  17. Cruzado A, Leen SB, Urchegui MA et al (2013) Finite element simulation of fretting wear and fatigue in thin steel wires. Int J Fatigue 55:7–21

    Article  Google Scholar 

  18. Zhuo M, Yang L, Xia K (2018) Contact stress analysis of combined rotor in heavy-duty gas Turbine considering thermal effect. J Xi’an Jiaotong Univ 52(11):58–64

    Google Scholar 

Download references

Acknowledgement

The authors are very grateful for the support of the National Natural Science Foundation of China (Grant No. 11872288), the Major Projects of Aviation Engine and Gas Turbine (Grant No. J2019-IV-0021), the Natural Science Foundation of Shaanxi Provincial (Grant No. 2019JM-219).

Author information

Authors and Affiliations

  1. State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049, Shaanxi, China

    Wei Wu, Lihua Yang & Zhenfa Wang

  2. Shaanxi Key Laboratory of Environment and Control for Flight Vehicle, Xi’an Jiaotong University, Xi’an, Shaanxi, 710049, People’s Republic of China

    Wei Wu, Lihua Yang & Zhenfa Wang

  3. School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an, 710049, Shaanxi, China

    Wei Wu, Lihua Yang & Zhenfa Wang

Authors
  1. Wei Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Lihua Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhenfa Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong

    Xingjian Jing

  2. Shanghai University, Shanghai, Shanghai, China

    Hu Ding

  3. Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, China

    Jiqiang Wang

Rights and permissions

Reprints and permissions

Copyright information

© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Wu, W., Yang, L., Wang, Z. (2022). The Fretting Characteristics of the Annular Flat Contact Interface in Heavy-Duty Gas Turbine. In: Jing, X., Ding, H., Wang, J. (eds) Advances in Applied Nonlinear Dynamics, Vibration and Control -2021. ICANDVC 2021. Lecture Notes in Electrical Engineering, vol 799. Springer, Singapore. https://doi.org/10.1007/978-981-16-5912-6_7

Download citation

  • DOI: https://doi.org/10.1007/978-981-16-5912-6_7

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-16-5911-9

  • Online ISBN: 978-981-16-5912-6

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation