Abstract
CNC machines have gone through tremendous upgrades along the years. However, conventional CNC machines could not find its place in the new era of machining due to its limitation in compatibility, language difference and control has caused increase in terms of repurchase cost, reinstallations, reconfigurations and also training. This paper covers the system which has been designed and developed from outdated and conventional PROLIGHT 1000 Milling CNC machine from Light Intelitek which further discussed in detail based upon upgrades of hardware, architecture, and algorithm design. Based on the system and software developed, there are several interfaces for the software classified based on different information needed and explained in the paper. Then, the flow process of using the application will be explained along with the data to be inputted, function of buttons and other features. The designed system software is established as UTHM Open CNC Controller (UOCC) under the ISO 14649 of STEP-NC environment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pritschow G et al (2001) Open controller architecture—past present and future. CIRP Ann Technol 50(2):463–470
Sarcar MMM, Rao KM, Narayan KL (2008) Computer aided design and manufacturing. Prentice Hall of India Private Limited
Pichler F, Moreno-Diaz R (1992) Computer aided systems theory. Springer, Berlin
Wang K, Tang M, Wang Y, Estensen L, Sollie PA, Pourjavad M (2002) Knowledge-based CAD/CAPP/CAM integration system for manufacturing. Digit Enterp Challenges 406–415
Latif K, Yusof Y (2016) New method for the development of sustainable STEP-compliant open CNC system. Procedia CIRP 40:230–235
Kramer T, Xu X (2009) STEP in a nutshell. In: Advanced design and manufacturing based on STEP. Springer, Berlin, pp 1–22
Yusof Y, Latif K (2015) New interpretation module for open architecture control based CNC systems. Procedia CIRP 26:729–734
Shackleford WP, Proctor FM (2001) Use of open source distribution for a machine tool controller. In: Sensors and controls for intelligent manufacturing, vol 4191. International Society for Optics and Photonics, pp 19–30
Wang H, Xu X (2004) A STEP-compliant ‘adaptor’ for linking CAPP with CNC. In: Proceedings of the 34th international MATADOR conference
Xu XW, Newman ST (2006) Making CNC machine tools more open, interoperable and intelligent—a review of the technologies. Comput Ind 57(2):141–152
Upadhyay DB, Rana AH (2014) STEP-NC standard for integration of CAD and CAM. Int J Eng Dev Res 1(2):106–112
Kelvin H, Hascoet J-Y, Rauch M (2014) Modern mechanical engineering. Springer, Berlin
Yusof Y, Latif K (2015) New technique for the interpretation of ISO 14649 and 6983 based on open CNC technology. Int J Comput Integr Manuf 3052:1–13
Mohd Elias D (2014) Step-NC controller for 3-axis CNC milling machine. Universiti Tun Hussein Onn Malaysia (UTHM)
Yusof Y, Latif K (2013) Frame work of LV-UTHM: an ISO 14649 based open control system for CNC milling machine. Appl Mech Mater 330:619–623
Autodesk Inc (2014) Fundamentals of CNC machining
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Adam, A., Yusof, Y., Latif, K., Kadir, A.Z.A., Sam, TH., Ahmad, M.I. (2022). Development of a Novel Open Platform Controller Machining Module for 3-Axis CNC Milling Machine. In: Isa, K., et al. Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020. Lecture Notes in Electrical Engineering, vol 770. Springer, Singapore. https://doi.org/10.1007/978-981-16-2406-3_63
Download citation
DOI: https://doi.org/10.1007/978-981-16-2406-3_63
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-2405-6
Online ISBN: 978-981-16-2406-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)