Abstract
From the approach of the modern welding innovation, above all else, the procedures that were developed delivered exhaust, and gases that were dangerous to the welders and the earth. The respiratory impacts commonly seen in welders include full-time bronchitis, discomfort, irregular lung function, lung fibrosis and a conceivable rise in lung development. By community debilitated ventilation and extraordinary respiratory hardware relevant to welding environments, especially in bound rooms, protective steps handled to beat consequences. Simultaneously, though, this might limit the problems and could not dispense with them. This led scientists into an eco-friendly form of welding. An environmentally friendly technique was built in this case, popularly known as friction stir welding (FSW) technique. FSW is an eco-friendly procedure and there is no need for separate gases that support weld. FSW process has no fumes, exhaust, arc glare and is an eco-friendly welding process. This paper focuses on the diseases and risks generated by welding effluents and demonstrate FSW prevalence without negotiating in strength, surface finish.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bahemmat P, Haghpanahi M, Besharati MK, Ahsanizadeh S, Rezaei H (2010) Study on mechanical, micro-, and macrostructural characteristics of dissimilar friction stir welding of AA6061-T6 and AA7075-T6. Proc Inst Mech Eng Part B: J Eng Manuf 224:1854
Bahemmat P, Besharati MK, Haghpanahia M, Rahbari A, Salekrostam R (2010) Mechanical, microand macrostructural analysis of AA7075—T fabricated by friction stir butt welding with different rotational speeds and tool pin profiles. Proc IMechE, Part B J Eng Manuf 224(B3):419–433. https://doi.org/10.1243/09544054JEM1554
Cavaliere P, Cerri E, Squillace A (2005) Mechanical response of 2024–7075 aluminium alloys joined by friction stir welding. J Mater Sci 40:3669–3676
Cavaliere P, De Santis A, Panella F, Squillace A (2008) Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding. Mater Des 30:609–616
Cavaliere P, Panella F (2008) Effect of tool position on the fatigue properties of dissimilar 2024–7075 sheets joined by friction stir welding. J Mater Process Technol 206:249–255
Cavalierea P, Nobilea R, Panellaa FW, Squillaceb A (2006) Mechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir welding. Int J Mach Tools Manuf 46:588–594
Elangovan K, Balasubramanian V (2007) Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminum alloy. Mater Sci Engng A 459:7–18
Lee WB, Yeon YM, Jung SB (2003) The mechanical properties related to the dominant microstructure in the weld zone of dissimilar formed Al alloy joints by friction stir welding. J Mater Sci 38:4183–4191
Mishra RS, Ma ZY (2005) Friction stir welding and processing. Mater Sci Eng R Rep 50(1–2):1–78
Sivakumar B, Raguraman D, Muruganandam D (2014) Health hazards due to various welding techniques and its remedy by friction stir welding (fsw). Int J Res Aeronaut Mech Eng 2(3):96–101
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Raja, S., Faheem, A., Ansari, A.H., Hasan, F., Murtaza, Q., Mohd Khan, S. (2022). Effect of Welding Emissions on Health and Its Remedy by Friction Stir Welding. In: Muzammil, M., Khan, A.A., Hasan, F. (eds) Ergonomics for Improved Productivity. HWWE 2021. Design Science and Innovation. Springer, Singapore. https://doi.org/10.1007/978-981-16-2229-8_17
Download citation
DOI: https://doi.org/10.1007/978-981-16-2229-8_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-2228-1
Online ISBN: 978-981-16-2229-8
eBook Packages: EngineeringEngineering (R0)