Abstract
In the process of the old oil field exploration, reservoir reconstruction, acidification and extract liquid is a common method of increase production. The reservoir connectivity is a key to the success of increase production. The research are based on the resistance capacity model, put forward the characterization parameters between the injection and production well, use dimensionless injection-production connectivity to identify the well flow channel. The results show that when the dimensionless injection-production connected coefficient greater than 1.1, the formation exist dominant channel. When the dimensionless injection-production connectivity coefficient is between 0.7 and 1.1, the injection-production efficiency is stay normal. When the dimensionless injection-production connectivity coefficient is less than 0.7, the reservoir transformation is require take action to decrease blockage. The research was successfully applied in the K&B oilfield for increase production measures such as fluid extraction, acidification, well group fracturing, etc., and the daily increase of oil in a single well was 272.2 m3. The research have significance guiding for the development of old oil fields.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hu, S., Zhang, L., Luo, J., et al.: Study on large pore path in sandstone reservoirs—review and prospect. Spec. Oil Gas Reservoirs 13(6), 10–13 (2006)
Hao, J.: Qualitative Identification of Prevailing Channel by Dimensionless Pressure Index. Spec. Oil Gas Reservoirs 21(4), 123–125 (2014)
Wang, L., Zhang, G., Hu, L., et al.: Tracer-oriented pore passage identification and remainder oil saturation distribution technologies. Fault-Block Oil Gas Field 10(4), 1–4 (2003)
Zhang, J., Yang, H.: The technical research of well test interpretation on Macropore path in layers. J. Yangtze Univ. 7(3), 533–535 (2010)
Yousef, A.A., Gentil, P.H., Jensen, J.L., et al.: A capacitance model to infer interwell connectivity from production and injection rate fluctuations. SPE Reservoir Eval. Eng. 9(6), 630–646 (2006)
Sayarpour, M., Zuluagae, E., Kabir, C.S., et al.: The use of capacitance-resistance models for rapid estimation of waterflood performance and optimization. J. Petrol. Sci. Eng. 69(3), 227–238 (2009)
Zhao, H., Li, Y., Gao, D., et al.: Research on reservoir interwell dynamic connectivity using systematic analysis method. Acta Petrolei Sinica 31(4), 633–636 (2010)
Wang, X., Cui, C., Wang, P., et al.: Interwell dynamic connectivity identification in Glutenite reservoir. Spec. Oil Gas Reservoirs 22(3), 118–120 (2015)
Wu, X., Deng, J., Chen, X., et al.: Calculation of injection-production connectivity and quantitative identification of flow channel. Spec. Oil Gas Reservoirs 3, 114–118 (2019)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liu, X. et al. (2021). Research and Application of Increase Production Measure Method Based on Injection-Production Connectivity Identification. In: Lin, J. (eds) Proceedings of the International Petroleum and Petrochemical Technology Conference 2020. IPPTC 2020. Springer, Singapore. https://doi.org/10.1007/978-981-16-1123-0_49
Download citation
DOI: https://doi.org/10.1007/978-981-16-1123-0_49
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-1122-3
Online ISBN: 978-981-16-1123-0
eBook Packages: EnergyEnergy (R0)