Abstract
The wise use of insulation materials in buildings not only reduces energy consumption but also reduces greenhouse gas emissions and increases the thermal comfort of the room. Oil palm wood fiber and ramie fiber have great potential as a basis for the thermal insulation bio board. The thermal stability of the base material is essential to study. The purpose of this study was to analyze the thermal characteristics of oil palm wood and ramie fiber as raw material for the thermal insulation bio board. Thermal characteristics were tested by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Oil palm wood fiber and ramie fiber as the base material get treatment before being tested. Oil palm wood fiber is immersed in 120 ℃ hot water for 30 and ramie fiber in 5% NaOH solution at the same time. The results of the TGA analysis show that the thermal stability of OPW fibers with treatment is better, 248 ℃ than the OPW without treatment at 235 ℃. Likewise, ramie fiber with 5% NaOH mixture has better thermal stability, 280 ℃ than untreated ramie fiber, which produces a peak temperature of 272 ℃. DSC analysis showed that the maximum temperature peaks occurred at 409 ℃ and 408 ℃ for OPW and hemp fiber treated, respectively. The thermal stability of fibers will increase with pretreatment compared to untreated fibers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Florea I, Manea DL (2019) Analysis of thermal insulation building materials based on natural fibers. Procedia Manuf 32:230–235
Geng Y, Ji W, Lin B, Hong J, Zhu Y (2018) Building energy performance diagnosis using energy bills and weather data. Energy Build 172:181–191
Viot H, Sempey A, Mora L, Batsale JC, Malvestio J (2018) Model predictive control of a thermally activated building system to improve energy management of an experimental building: Part I—Modeling and measurements. Energy Build 172:94–103
Zhang Y, Bai X, Mills FP, Pezzey JCV (2018) Rethinking the role of occupant behavior in building energy performance: a review. Energy Build 172:279–294
La Rosa AD et al (2014) Environmental impacts and thermal insulation performance of innovative composite solutions for building applications. Constr Build Mater 55:406–414
Sadineni SB, Madala S, Boehm RF (2011) Passive building energy savings: a review of building envelope components. Renew Sustain Energy Rev 15(8):3617–3631
Aditya L et al (2017) A review on insulation materials for energy conservation in buildings. Renew Sustain Energy Rev 73:1352–1365
Jelle BP (2011) Traditional, state-of-the-art and future thermal building insulation materials and solutions–properties, requirements and possibilities. Energy Build 43(10):2549–2563
Wei K, Lv C, Chen M, Zhou X, Dai Z, Shen D (2015) Development and performance evaluation of a new thermal insulation material from rice straw using high frequency hot-pressing. Energy Build 87:116–122
Zhou X, Zheng F, Li H, Lu C (2010) An environment-friendly thermal insulation material from cotton stalk fibers. Energy Build 42(7):1070–1074
Panyakaew S, Fotios S (2011) New thermal insulation boards made from coconut husk and bagasse. Energy Build 43(7):1732–1739
Korjenic A, Petránek V, Zach J, Hroudová J (2011) Development and performance evaluation of natural thermal-insulation materials composed of renewable resources. Energy Build 43(9):2518–2523
Manohar K, Ramlakhan D, Kochhar G, Haldar S (2006) Biodegradable fibrous thermal insulation. J Brazilian Soc Mech Sci Eng 28(1):45–47
Cetiner I, Shea AD (2018) Wood waste as an alternative thermal insulation for buildings. Energy Build 168:374–384
Ginting A, Mawardi I, Jannifar A, Hasyim SS, Anzieb MR (2019) Effectiveness of die hole on wood pellet density quality improvement. IOP Conf Ser: Earth Environ Sci 268(1):12166
Braiek A, Karkri M, Adili A, Ibos L, Ben Nasrallah S (2017) Estimation of the thermophysical properties of date palm fibers/gypsum composite for use as insulating materials in building. Energy Build 140:268–279
Opoku R, Obeng GY, Darkwa J, Kwofie S (2020) Minimizing heat transmission loads and improving energy efficiency of building envelopes in sub-Saharan Africa using bio-based composite materials. Sci African, e00358
Pertanian DJPK (2018) Statistik Perkebunan Indonesia 2017–2019 (kelapa sawit). Direktorat Jenderal Perkebunan Kementerian Pertanian, Jakarta
Hambali E, Rivai M (2017) The potential of palm oil waste biomass in Indonesia in 2020 and 2030. IOP Conf Ser: Earth Environ Sci 65(1):12050
Loh SK (2017) The potential of the Malaysian oil palm biomass as a renewable energy source. Energy Convers Manag 141:285–298
Bilba K, Arsene M-A, Ouensanga A (2007) Study of banana and coconut fibers: botanical composition, thermal degradation and textural observations. Bioresour Technol 98(1):58–68
Kabir MM (2012) Effects of chemical treatments on hemp fiber reinforced polyester composites. University of Southern Queensland
Ali ME, Alabdulkarem A (2017) On thermal characteristics and microstructure of a new insulation material extracted from date palm trees surface fibers. Constr Build Mater 138:276–284
Mawardi I (2018) Effect of fiber fibrillation on impact and flexural strength of coir fiber reinforced epoxy hybrid composites. IOP Conf Ser: Mater Sci Eng 334(1):12079
Ahmed A, Qayoum A, Mir FQ (2019) Investigation of the thermal behavior of the natural insulation materials for low temperature regions. J Build Eng 26:100849
Acknowledgements
Acknowledgements awarded to KEMENRISTEKDIKTI, which has funded this research through the scheme Beasiswa Pendidikan Pascasarjana dalam Negeri (BPP-DN) 2019.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Mawardi, I., Rizal, S., Aprilia, S., Faisal, M. (2021). Thermal Characteristics of Oil Palm Wood and Ramie Fiber as Raw Materials for Thermal Insulation Bio Board. In: Akhyar (eds) Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-0736-3_3
Download citation
DOI: https://doi.org/10.1007/978-981-16-0736-3_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-0735-6
Online ISBN: 978-981-16-0736-3
eBook Packages: EngineeringEngineering (R0)