Abstract
A study of weld joints of nonferrous, Nickel 201 alloy sheets using a new generation disk laser as the green welding technology for effective manufacturing was carried out, and the results are presented in this paper. Weld joints of the Nickel 201 sheets 2.0 mm thick were welded by laser without an additional material at a flat position, using high purity argon as the shielding gas. The influence of laser welding parameters on weld quality and mechanical properties of test joints was studied. The influence of welding speed and laser power to the joint quality was investigated. The study of quality and mechanical properties of the joints were determined by metallographic evaluation, tensile and hardness tests.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
TWI Homepage. https://www.twi-global.com
Nickel Institute Homepage. https://www.nickelinstitute.org
Kumar, G.K., Velmurugan, C., Jayaram, R.S., Manikandan, M.: Effect of laser welding process parameters on dissimilar joints of AISI 316 and nickel 201. Mater. Today Proc. 22(4), 2964–2973 (2020)
Rikka, V.R., et al.: Tailoring micro resistance spot welding parameters for joining nickel tab to inner aluminum casing in a cylindrical lithium ion cell and its influence on the electrochemical performance. J. Manuf. Process. 49, 463–471 (2020)
Brand, M., Schmidt, P., Zaeh, M., Jossen, A.: Welding techniques for battery cells and resulting electrical contact resistances. J. Energ. Storage 1, 7–14 (2015)
Zhou, S., Ma, G., Wu, D., Chai, D., Lei, M.: Ultrasonic vibration assisted laser welding of nickel-based alloy and austenite stainless steel. J. Manuf. Process. 31, 759–767 (2018)
Ma, G., Wu, D., Niu, F., Zou, H.: Microstructure evolution and mechanical property of pulsed laser welded Ni-based superalloy. Opt. Laser Eng. 72, 39–46 (2015)
Zhou, S., Ma, G., Chai, D., et al.: Nickel-based alloy/austenitic stainless steel dis-similar weld properties prediction on asymmetric distribution of laser energy. Opt. Laser Technol. 81, 3w33–39 (2016)
Lippold, J.C., Kiser, S.D., DuPont, J.N.: Welding Metallurgy and Weldability of Nickel-base Alloys. John Wiley & Sons, Hoboken (2011)
Caron, J.L., Sowards, J.W.: Weldability of Nickel-base Alloys, 1st edn. In: Comprehensive Materials Processing. Elsevier, Amsterdam (2014)
Lippold, J.C., Nissley, N.E.: Ductility-dip Cracking in High Chromium, Ni – base Filler Metals. Hot cracking phenomena in welds II. Springer, Berlin (2008)
Kaplan, A.F.H., Mizutani, M., Katayama, S., Matsunawa, A.: Mechanism of pore formation during keyhole laser spot welding. In: Proceedings SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, pp. 186–191. Osaka (2003)
Acknowledgments
This research is supported by VEGA 1/0091/17 which are supported by Slovak Republic Ministry of Education.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kovaříková, I., Šimeková, B., Hodúlová, E., Bárta, J., Kovačócy, P. (2021). Research on Laser Beam Welding of Nickel. In: Jármai, K., Voith, K. (eds) Vehicle and Automotive Engineering 3. VAE 2020. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-9529-5_43
Download citation
DOI: https://doi.org/10.1007/978-981-15-9529-5_43
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-9528-8
Online ISBN: 978-981-15-9529-5
eBook Packages: EngineeringEngineering (R0)