Abstract
Airborne wind technology eliminates the structure costs and reaches higher altitudes for extracting the power from stronger winds. The main objective is to perform the aerodynamic test on the airfoil kite with lightweight, low-power wireless devices for better data reception. The kite maneuvers in eight shapes to deliver maximum power; therefore, the positioning device has to be low powered, low weight, and weatherproof, to avoid indeterminacy in airfoil flight at 200–300 m altitude. The device consists of ultra-low-power TI CC1310 SimpleLink Sub-1Ghz wireless Microcontroller Unit (MCU), GPS Sensor, Inertial Measurement Unit (IMU) to find the speed, direction, longitude, latitude, and altitude, roll, pitch, and yaw at the ground station, for controlling the tethered wings autonomously. The base station receives data at 868 MHz optimum frequency at 50 kbps data rate; the optimized frequency is estimated using a virtual toolbox and a field test.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Loyd ML (1980) Crosswind kite power (for large-scale wind power production). J. Energy 4(3):106–111
Castelino RV, Jana S, Kumar R (2018) Analytical and experimental study of Parafoil kite force with different angle of attack in ANSYS environment for wind energy generation. In: 4th international conference on electrical energy systems (ICEES), pp 381–385
Canale M, Fagiano L, Milanese M (2010) High altitude wind energy generation using controlled power kites. IEEE Trans Control Syst Technol 8(2):279–293
Zgraggen AU, Fagiano L, Morari M (2015) Real-time optimization and adaptation of the crosswind flight of tethered wings for airborne wind energy. IEEE Trans Control Syst Technol 23(2):434–448
Fechner U, Schmehl R (2014) Feed-forward control of kite power systems. J Phys Conf Ser 524(1):012081
Fechner U (2016) A methodology for the design of kite-power control systems
Mahanta H, Rajput D, Bollam S (2016) Gandhian young technological innovation awards (GYTI), New Delhi, pp 64–65
Fagiano L, Marks T (2014) Design of a small-scale prototype for research in airborne wind energy. IEEE/ASME Trans Mechatron 20(1):166–177
Oehler J, Schmehl R et al. (2018) Experimental investigation of soft kite performance during turning maneuvers. J Phys Conf Ser 1037(5):052004
Fagiano L, Novara C (2014) Automatic crosswind flight of tethered wings for airborne wind energy: a direct data-driven approach. IFAC Proc 47(3):4927–4932
Fechner U, Schmehl R (2012) Design of a distributed kite power control system. In: IEEE international conference on control applications, IEEE, pp 800–805
Fagiano L, Huynh K, Bamieh B, Khammash M (2013) On sensor fusion for airborne wind energy systems. IEEE Trans Control Syst Technol 22(3):930–943
Sun Q, Wang Y, Sun, Q, Yong-yug-yu W (2012) Data-driven predictive functional control of power kites for high altitude wind energy generation. In: IEEE Electrical power and energy conference, IEEE, pp 274–279
Polzin M, Wood TA, Hesse H, Smith RS (2017) State estimation for kite power systems with delayed sensor measurements. IFAC-PapersOnLine 50(1):11959–11964
Instruments Texas (2016) CC1310 SimplelinkTM Ultra-Low Power Sub-1 GHz Wireless MCU. CC1310 Datasheet (SWRS184)
Acknowledgements
We would like to thank the National Institute of Technology Karnataka, Surathkal for providing the facilities to test our experiments and also to the Electrical and Electronics Engineering department for their support for carrying out the experiments.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Castelino, R.V., Kashyap, Y. (2021). Airborne Manoeuvre Tracking Device for Kite-based Wind Power Generation. In: Singh, A.K., Tripathy, M. (eds) Control Applications in Modern Power System. Lecture Notes in Electrical Engineering, vol 710. Springer, Singapore. https://doi.org/10.1007/978-981-15-8815-0_44
Download citation
DOI: https://doi.org/10.1007/978-981-15-8815-0_44
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8814-3
Online ISBN: 978-981-15-8815-0
eBook Packages: EnergyEnergy (R0)