Abstract
The analysis of thermal runaway temperature of lithium-ion batteries hit by gunpowder is of great significance to improve the safety of large energy storage facilities and mobile energy storage square cabin. Based on the self-designed experimental device and data acquisition system, a series of experiments shooting on lithium-ion batteries was carried out. Meanwhile, infrared temperature data is acquired and analyzed. The results show that the surface temperature of all the batteries has the first peak due to the gunshot. And the second peak is formed due to thermal runaway inside the battery. The larger the batteries’ state of charge is, the higher the first peak of batteries’ surface temperature is. Overall, the order of the lithium-ion batteries’ safety from high to low is lithium titanate battery, lithium iron phosphate battery, lithium nickel manganese cobalt battery and Li-sulfur battery.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lu L, Zhang T, Huang S (2014) Analysis and prospect of application prospect of military battery energy storage system. National Def Sci Technol 35(03):20–25
Peng Q, Liu QX, Ye YL (2010) Safety standards and safety requirements for lithium batteries. Reliab Environ Test Electron Prod 28(06):49–53
Gao P, Xu D Wang Y(2017) Research on domestic and international standards of lithium ion batteries and their systems for energy storage [J]. Energy Stor Sci Technol 6(02):270–274
GJB 374A-2013, lithium battery safety standard [S]
GB/T 18287, general specification for lithium-ion batteries and battery packs for mobile phones [S]
GB 8897.4-2008, galvanic batteries - part 4: safety requirements for lithium batteries [S]
Li X, Liu D (2017) The number of domestically made 7.62 mm caliber bullets (ii). Weapon Knowl (09):58–63
Qian Y (1988) A preliminary study on cavity effect. Acta Aeromechanica Sinica (02):23–31
Bo J, Gu Y (1986) Mechanism and test of small-calibre weapons and their relationship with international law (excerpt). J Ordnol Eng (03):47–57
Zhao Q (2004) Analysis on the power of 12.7 mm wolfram shell piercing armor. J Sichuan Ordnance Eng (01):34–36
Doughty DH, Roth PE (2012) A general discussion of Li-ion safety. J Electrochem Soc Interface 21(2):37–44
J Chongqing Univ Technol (Natural Sci) 32(10):34–39 (2018)
Maleki H, Howard JN (2009) Internal short circuit in li-ion cells. J Power Sources 191(2):568–574
Wu T (2018) Experimental study on heat generation and heat-induced runaway characteristics of lithium ion batteries. University of science and technology of China
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Xu, W. et al. (2021). Temperature Data Acquisition and Safety Characteristics Analysis of Lithium-Ion Battery’s Thermal Runaway. In: Liang, Q., Wang, W., Liu, X., Na, Z., Li, X., Zhang, B. (eds) Communications, Signal Processing, and Systems. CSPS 2020. Lecture Notes in Electrical Engineering, vol 654. Springer, Singapore. https://doi.org/10.1007/978-981-15-8411-4_190
Download citation
DOI: https://doi.org/10.1007/978-981-15-8411-4_190
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8410-7
Online ISBN: 978-981-15-8411-4
eBook Packages: EngineeringEngineering (R0)