Abstract
Composite construction occupies a vital part in construction industry due to rapid completion of the projects. In composite systems, floor decking sheets involve a drastic study for effective replacement of conventional slab system. The composite floor deck system consists of profile deck sheet at the bottom above which minimum reinforcement is provided to take care of shrinkage stresses. The deck sheet acts as a temporary shuttering during concreting. The present work aims to investigate the vibration characteristics of profile deck sheet under various profile shapes employed for composite slab system. Modal analysis is a one of the technique adopted in which vibration studies can be determined for various profile shapes by involving parameters such as mode shape, natural frequency, plate stresses, and deformation by using finite element analysis. Based on the profile shapes the stiffness of the sheet varies with frequency.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Li W, Xu H, Du J (2015) Modal analysis of general plate structures. J Vib Acoust 136
Al-Maliky FT (2018) Modal analysis of central crack stainless steel plate using ANSYS program. Int J Mech Eng Technol 9(9):460–466
Kumar A, Arakerimath RR (2015) A review and modal analysis of stiffened plate. Int Res J Eng Technol 2(8):581–588
Ikechukwu O, Aniekan I, Pau S, Ikpe E (2016) Experimental modal analysis of a flat plate subjected to vibration. Am J Eng Res (AJER) 6:30–37
Sonawane AR, Talmale PS, Sapkal LGN (2017) Modal analysis of single rectangular cantilever plate by mathematically, FEA and experimental, pp 264–269
Zhong Y et al (1993) Vibration of plate on foundation with four edges free by finite cosine integral transform method. Lat Am J Solids Struct 1954:854–863
Merneedi A, Raonalluri M, Rao VVS (2017) Free vibration analysis of a thin rectangular plate with multiple circular and rectangular cut-outs. J Mech Sci Technol 31(11):5185–5186
Ramu I, Mohanty SC (2014) Method. MSPRO 6(Icmpc):460–467
Bhusnar M, Sarawade SS (2016) Modal analysis of rectangular plate with lap joints to find natural frequencies and mode shapes, pp 6–14
Khan IA, Awari GK (2014) Analysis of natural frequency and mode shape of all edge fixed condition plate with uncertain parameters. Int J Innov Res Sci Eng Technol 3(2):9277–9284
Waghulde KB, Kumar B, Garse TD, Patil MM (2011) Vibration analysis and control of cantilever plate by using finite element analysis. J Eng Res Stud Iii
Avitabile P. Experimental modal analysis. In: Modal analysis and control laboratory, pp 1–15
Klimenda F, Soukup J (2017) Modal analysis of thin aluminum plate. Procedia Eng 177:11–16
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Preetha, V., Senthilkumar, V., Govindhan, S., Vishnu, D., RanjithSelvan, K. (2021). Modal Analysis of Profile Deck Sheets in Composite Structural System. In: Kumaresan, G., Shanmugam, N.S., Dhinakaran, V. (eds) Advances in Materials Research. ICAMR 2019. Springer Proceedings in Materials, vol 5. Springer, Singapore. https://doi.org/10.1007/978-981-15-8319-3_20
Download citation
DOI: https://doi.org/10.1007/978-981-15-8319-3_20
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8318-6
Online ISBN: 978-981-15-8319-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)